Products
4" x 1" x .25" Galvanized Flat Plate w/ 1/2" Holes - Shackle Link
$4.99
Brand Com-Fab
General
4" x 1" x .25" Galvanized Flat Plate w/ 2 1/2" Holes and a 2.5" Hole Center - Shackle Link
- This item is part of the 1000G - Bunk Mounting Kit to mount Bunk Boards onto PWT-800G, PWT-1000G, and PWT-1100G trailer models.
- This item is part of the Tall Galvanized Bunk Bracket Kit used to mount mount 2″ x 4″ or 2″ x 6″ bunk boards on all Pontoon Boat Trailer models.
MODEL: CFFLTSTRPBUNK(SGL)G
Used on
4" x 1" x .25" Zinc Flat Plate w/ 1/2" Holes - Shackle Link
$4.99
Brand Com-Fab
General
4" x 1" x .25" Zinc Flat Plate w/ 1/2" Holes and a 2.5" Hole Center - Shackle Link
- This item is part of the 1000B - Bunk Mounting Kit used to mount Bunk Boards onto PWT-800B, PWT-1000B, and PWT-1100B trailer models.
MODEL: CFFLTSTRPBUNK(SGL)Z
Used on
4-Leaf Slipper Flat Springs 1000 lb Capacity (Qty 2)
$89.99 $70.00
Brand Com-Fab
General
4-Leaf Slipper Springs 1000 lb Maximum Capacity (Qty 2)
- This item is mounted to the 2000 lb Extended Galvanized Trailer Axle with a Galvanized Tie Plate Kit.
DEXTER MODEL: #13071
MODEL: CFAXLE-LSPRNG(4-SF)
Specifications
Length: 24.63"
Leaf Width: 1.75"
Arch Height: 4.50"
Bushing Type: Nylon
Used on
4.80 x 12″ AM02 Black Metal Machined Aluminum Tire & Wheel Load Range C, Bias
$124.99
Brand Com-Fab
General
4.80 x 12″ AM02 Black Metal Machined Aluminum Tire & Wheel Load Range C, Bias
This is the tire and wheel used on the PWT1100AL model and optional for PWT-800, PWT-1000, PWT-1100, and PWT-2212 black powder coated and galvanized trailer models. Speed rating 81 mph.
MODEL: CFT48012-VSPOKE(BM)-LRC
Used on
PWT-1100AL
Optional for
4.80 x 12″ C Load Range Galvanized Tire & Wheel, Bias - Kenda/Loadstar
$79.99 $74.99
Brand Com-Fab
General
4.80 x 12″ C Load Range Galvanized Finish Tire & Wheel, Bias - Kenda/Loadstar
This is the tire and wheel used on PWT-800G, PWT-1000G, PWT-1100G, PWT-2212G, and all Jon Boat Trailer models. Tire Capacity is 990lbs (450kg). Speed rating 81 mph.
MODEL: CFT48012G
Used on
4.80 x 12″ C Load Range Silver E-Coat Tire & Wheel, Bias - Kenda/Loadstar
$69.99 $65.99
Brand Com-Fab
General
4.80 x 12″ C Load Range Silver E-Coat Finish Tire & Wheel, Bias - Kenda/Loadstar
This is the tire and wheel used on PWT-800B, PWT-1000B, PWT-1100B, and PWT-2212B black powder coated trailer models. Tire capacity is 990lbs (450kg). Speed rating 65 mph.
MODEL: CFT48012S-LRC
Used on
4.80x12 C Load Range Bias 12IN Series 07 Gun Metal V-Spoke 545 Hole Pattern Aluminum Tire/Wheel Assembly
$134.99
Brand Com-Fab Trailers
4.80x12 Gun Metal V-Spoke 545 Hole Pattern Aluminum Tire & Wheel Load Range C; Bias
This is the tire and wheel used on the PWT1100AL model and optional for PWT-800, PWT-1000, PWT-1100, and PWT-2212 black powder coated and galvanized trailer models. Speed rating 81 mph.
48IN 14GA Galvanized Crossbar
$55.00
Brand Com-Fab Trailers
5-Leaf Slipper Springs 1,250 lb Capacity (Qty 2)
$99.99
Brand Com-Fab
General
5-Leaf Slipper Springs 1,250 lb Maximum Capacity (Qty 2)
- This item is mounted to the 2500 lb Galvanized Trailer Axle with a BATIE190G Galvanized Tie Plate Kit.
- This item is mounted to the 2500 lb Black Powder Coated Trailer Axle with a BATIE190Z Zinc Tie Plate Kit.
TIE DOWN MODEL: #13086
MODEL: CFAXLE5-LSPRNG(SF)
Specifications
Length: 24.63"
Leaf Width: 1.75"
Arch Height: 4.50"
Bushing Type: Nylon
Used on
5.30X12D C Load Galvanized Tire and Wheel
$94.99 $89.99
Brand Com-Fab
5.70 x 8″ C Load Range Galvanized Tire & Wheel, Bias
$69.99
Brand Com-Fab
General
5.70 x 8″ C Load Range Galvanized Finish Tire & Wheel, Bias
This tire and wheel is optional on the PWT-800G, PWT-1000G, PWT-1100G, and all Jon Boat Trailer models. Speed rating 65 mph.
MODEL: CFT5708G
Optional on
5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw
$0.70
Brand Com-Fab
General
5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw
It is used for mounting Bunk Boards to Galvanized Angular Swivel Brackets, and Pontoon Boat Trailer Bunk Brackets on all trailer models.
MODEL: CFSCRWLAG-5/16-0150
Used on
ALL COM-FAB TRAILER MODELS
5″ Poly Keel Roller Assembly for 3" Wide Trailer
$44.99 $40.00
Brand Com-Fab
General
5″ Poly Keel Roller Assembly for 3" Wide Trailer
Materials Included:
2 – 12.5″ Galvanized Adjustable Keel Roller Bracket
1 – 1/2″-16 x 6″ Zinc Hex Head Cap Bolt
2 – 3/8″-16 x 3.75″ Zinc Hex Head Cap Bolt
2 – 1/2″ USS Zinc Plated Washer
2 – 3/8″ Zinc Hex Flange Top Lock Nut
MODEL: CFKEELRLRASSM
Used on
6 Capacity Canoe/Kayak Conversion Kit
$729.99
Brand Com-Fab
General
6 Capacity Canoe/Kayak Conversion Kit
Canoe/kayak trailer conversion kit for up to 6 canoes or 6 kayaks without plastic protective covering.
One size fits all trailer kit:
- Designed to hold 6 regular sized canoes/kayaks
- Fits on 1.5", 2", 3" rectangular and/or square tubing where applicable.
- 2 x 2 x 11 gauge upright bracing for universal fit.
- 2 x 2 x 14 gauge cross braces
This is a conversion kit only and requires a separate trailer to mount.
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
Specifications
6 Capacity Normal Kayak Kit - CFKIT-KAY(6S)
- 2x 48" Uprights
- 6x 60" Crossbeams with Strap Assist and End Caps
- 6x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 12x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 12x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 12x Turned Eye Bolts for use with Tie Downs
- 24x Galvanized Lock Nuts for locking in Eye Bolts
6 Capacity Tall Kayak Kit - CFKIT-KAY(6T)
- 2x 60" Uprights
- 6x 60" Crossbeams with Strap Assist and End Caps
- 6x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 12x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 12x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 12x Turned Eye Bolts for use with Tie Downs
- 24x Galvanized Lock Nuts for locking in Eye Bolts
6 Capacity Normal Canoe Kit - CFKIT-CAN(6S)
- 2x 60" Uprights
- 6x 80" Crossbeams with Strap Assist and End Caps
- 6x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 12x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 12x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 12x Turned Eye Bolts for use with Tie Downs
- 24x Galvanized Lock Nuts for locking in Eye Bolts
6 Capacity Tall Canoe Kit - CFKIT-CAN(6T)
- 2x 72" Uprights
- 6x 80" Crossbeams with Strap Assist and End Caps
- 6x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 12x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 12x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 12x Turned Eye Bolts for use with Tie Downs
- 24x Galvanized Lock Nuts for locking in Eye Bolts
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
6" x 1.5" x .25" Galvanized Flat Plate w/ 7/16" Holes - Shackle Link
$4.99
Brand Com-Fab
General
6" x 1.5" x .25" Galvanized Flat Plate w/ 2 7/16" Holes and 4.5" Hole Centers - Shackle Link
- This item is part of the 2213G - Fender Mounting Kit used to mount Fenders to PWT-2213G, and PWT-2214G Trailer models.
MODEL: CFFLTSTRPFNDR(DBL)G
Used on
6" x 1.5" x 1.25" Zinc Flat Plate w/ 7/16" Holes - Shackle Link
$4.99
Brand Com-Fab
General
6" x 1.5" x 1.25" Zinc Flat Plate w/ 2 7/16" Holes and 4.5" Hole Centers - Shackle Link
This item is part of the 2213B - Fender Mounting Kit used to mount Fenders onto 2213B, and 2214B trailer models.
MODEL: CFFLTSTRPFNDR(DBL)Z
Used on
600 lb Capacity Crank Winch with Strap and Hook Dutton-Lainson
$59.99 $54.99
Brand Com-Fab
General
Dutton-Lainson 900 lb Capacity Crank Winch
This item is a heavy duty winch used for horizontal pulling applications. It contains high carbon steel gears, permanently lubricated bearings, and a zinc tuffplate finish. A 12′ Winch Strap w/ Spring Loaded Hook and Loop End, and a Dutton-Lainson 900 lb Winch Handle. The mounting materials are sold separately.
Mounting Kit Includes:
2 - 3/8"-16 x 1" Zinc Hex Head Cap Bolt
2 - 3/8"-16 Serrated Zinc Flange Nuts
MODEL: CFWNCH900DL
Used on
60IN 14GA Galvanized Crossbar
$60.00
Brand Com-Fab Trailers
60IN 14GA Galvanized Crossbar for Canoe/Kayak Kit
64″ Grey Flex Hose Banjo-Banjo Brake Line - Dexter
$55.00
Brand Com-Fab
General
64″ Grey Flex Hose Banjo-Banjo Brake Line - Dexter
This item is used to connect two Aluminum E-Coat Caliper Assemblies on Tandem Axle Pontoon Boat Trailer models.
For use with:
Used on
6600 lb Capacity Hydraulic Disc Brake Actuator w/ 2" Coupler - Dexter
$299.99 $215.99
Brand Com-Fab
General
Model 66 6600 lb GVWR Capacity Hydraulic Disc Brake Actuator; 660 lb Tongue Load; 2″ Coupler (Includes Disc Brake Solenoid) - Dexter
This item is used with Hydraulic Disc Brake Setups on every Pontoon Boat Trailer model with Disc Brakes.This item is mounted to Pontoon Boat Trailer models with an Actuator Mounting Kit
MODEL: CFCPLR-BRAKE(DISC-660)
Used on
7/16" Diameter x 2.593 Stainless Steel Slider Pin
$7.99
Brand Com-Fab
General
Tie Down 7/16" Diameter x 2.593 Stainless Steel Slider Pin
This item is used for mounting a Tie Down caliper to a 9.6" vented rotor. Stainless steel caliper slide pins are easily accessible with hex heads for quick removal. It allows the caliper to float freely and insures proper alignment during installation. It fits all vented rotor calipers.
TIEDOWN MODEL #007-692-00 or 12114
MODEL: CFAXLE-PIN(CALIPER-SS)
Used on
7/16" x 2.06" x 4.31" Galvanized U-Bolt
$6.99
Brand Com-Fab
General
7/16" x 2.06" x 4.31" Galvanized U-Bolt
This item is part of the Kayak/Canoe Trailer Upright Mounting Kit.
TIE DOWN MODEL: #84051G
MODEL: CFUBLT7/16x2.06x4.31G
Used on
KCT-1200KCT-1400
KCT-1600
7000# Galvanized Tie Plate for 2" Square Axle Tubing
$9.99
Brand Com-Fab
General
7000# Galvanized Axle Tie Plate w/ 4.49" x 3.5" Dimensions for 2" Tubing and 1.75" Spring Width
This item is part of the 7000# Galvanized Tie Plate Kit used to mount 3-Leaf Double Eye Springs on to 3500 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles.
TIE DOWN MODEL: 44849DG
MODEL: CFAXLE-TIEPLATE(7000-G)
Specifications
Axle Size: 2" x 2" Square Axle
U-Bolt Size: 1/2"-13 x 2.06" x 4.31"
Dimensions: 4.49" x 3.5"
Tube Width: 2"
Spring Width: 1-3/4"
Hole Diameter: 9/16"
U-Bolt Finish: Galvanized
Plate Finish: Galvanized
Used on
7000# Galvanized Tie Plate Kit for 2" Square Trailer Axle
$44.99
Brand Com-Fab
General
7000# Galvanized Tie Plate Kit for 2" Square Trailer Axle
This kit is used to mount springs to 2" Square Trailer Axles.
- It is a part of the 3500 lb Hydraulic Disc Brake Trailer Axle, used on Pontoon Boat Trailer models w/ Brakes.
- It is a part of the 2900 lb Idler Trailer Axle, used on Pontoon Boat Trailer models without Brakes.
Materials Include:
2 - 7000# Galvanized Tie Plate for 2" Square Axle Tubing
4 - 1/2"-13 x 2.06" x 4.31" Galvanized U-Bolt
8 - 1/2″-13 Galvanized Tri-Lock Nut
MODEL: CFAXLE-TIEPLATEKIT(7000-G)