Products
'River Hawk' Jon Boat Trailer Bunk Mounting Kit
$39.99
Brand Com-Fab
General
'River Hawk' Jon Boat Trailer Bunk Mounting Kit
This kit contains all of the requisite materials needed to mount a 2″ x 4″ x 10′ Black Marine Carpeted Bunk Board onto the JBT-1600 'River Hawk' Style Jon Boat Trailer model.
Materials Include:
3 – 3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt
3 – 8″ Adjustable Bolster Bunk Bracket
3 – 3/8″-16 x 1" Galvanized Hex Head Bolt
3 – Galvanized Angular Swivel Bracket
6 – 3/8″-16 Galvanized Tri-Lock Nut
9 – 3/8″-16 Galvanized Flat Washer
6 – 5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw
MODEL: CFBNKKIT-JBT(HAWK)
Used on
JBT-1600 'River Hawk'
'River Hawk' Jon Boat Trailer Bunk Mounting Kit
This kit contains all of the requisite materials needed to mount a 2″ x 4″ x 10′ Black Marine Carpeted Bunk Board onto the JBT-1600 'River Hawk' Style Jon Boat Trailer model.
Materials Include:
3 – 3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt
3 – 8″ Adjustable Bolster Bunk Bracket
3 – 3/8″-16 x 1" Galvanized Hex Head Bolt
3 – Galvanized Angular Swivel Bracket
6 – 3/8″-16 Galvanized Tri-Lock Nut
9 – 3/8″-16 Galvanized Flat Washer
6 – 5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw
MODEL: CFBNKKIT-JBT(HAWK)
JBT-1600 'River Hawk'
10 ft Walk Board Black Marine Carpet
$33.00
Brand Com-Fab
General
10 ft Walk Board Black Marine Carpet
Protective carpeting for the 2″ x 8″ x 10′ Black Marine Carpeted Center Walk Board used on all of our Double PWC Trailer Models.
11 ft by 14.4 in to fully cover the walk board
Used on
10 ft Walk Board Black Marine Carpet
Protective carpeting for the 2″ x 8″ x 10′ Black Marine Carpeted Center Walk Board used on all of our Double PWC Trailer Models.
11 ft by 14.4 in to fully cover the walk board
10" Galvanized Adjustable Bolster Bunk Bracket
$10.00
Brand Com-Fab
General
10" Galvanized Adjustable Bolster Bunk Bracket
These are optional Bolster Brackets for all Jon Boat Trailer models.
Jon Boat Trailer Bunk Mounting Kit
TIE DOWN MODEL: #86131G
MODEL: CFBRKTBLSTR-10
Optional for
10" Galvanized Adjustable Bolster Bunk Bracket
These are optional Bolster Brackets for all Jon Boat Trailer models.
Jon Boat Trailer Bunk Mounting Kit
TIE DOWN MODEL: #86131G
MODEL: CFBRKTBLSTR-10
10.25" Black Marine Carpet
$2.50
Brand Com-Fab
General
Black Marine Carpet 10.25" Width
$2/ft in 100 ft rolls
- This carpet is used for bunks on all of our PWC Trailer, and Jon Boat Trailer models. It is optional for our Pontoon Trailer models and Canoe/Kayak Angler Kits.
If you are purchasing this carpet it needs to be a foot longer than the board itself.
This carpet comes in these specific sizes as well:
- 5 ft Bunk Board Black Marine Carpet
- 6 ft Bunk Board Black Marine Carpet
- 7 ft Bunk Board Black Marine Carpet
MODEL: CFBNKCOVER-CARPET(10.25)
Used on
PWT-2214G
JBT-900
JBT-1400
JBT-1600
JBT-1600 ‘RIVER HAWK’
Optional for
Black Marine Carpet 10.25" Width
$2/ft in 100 ft rolls
- This carpet is used for bunks on all of our PWC Trailer, and Jon Boat Trailer models. It is optional for our Pontoon Trailer models and Canoe/Kayak Angler Kits.
If you are purchasing this carpet it needs to be a foot longer than the board itself.
This carpet comes in these specific sizes as well:
- 5 ft Bunk Board Black Marine Carpet
- 6 ft Bunk Board Black Marine Carpet
- 7 ft Bunk Board Black Marine Carpet
MODEL: CFBNKCOVER-CARPET(10.25)
PWT-2214G
JBT-900
JBT-1400
JBT-1600
JBT-1600 ‘RIVER HAWK’
14.4" Black Marine Carpet
$3.00
Brand Com-Fab
General
10 ft Walk Board Black Marine Carpet
Protective carpeting for the 2″ x 8″ x 10′ Black Marine Carpeted Center Walk Board used on all of our Double PWC Trailer Models.
$2.25/ft in 100 ft rolls
If you are purchasing this carpet it needs to be a foot longer than the board itself.
Used on
10 ft Walk Board Black Marine Carpet
Protective carpeting for the 2″ x 8″ x 10′ Black Marine Carpeted Center Walk Board used on all of our Double PWC Trailer Models.
$2.25/ft in 100 ft rolls
If you are purchasing this carpet it needs to be a foot longer than the board itself.
2 x 4 x 10′ Black Marine Carpeted Bunk Board
$59.99 $55.00
Brand Com-Fab
General
2 x 4 x 10′ Black Marine Carpeted Bunk Board
This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340
These are used as the standard option for JBT-1600 'River Hawk' Trailer models, as well as an upgradeable option for the JBT-1400 model.
'River Hawk' Jon Boat Trailer Bunk Mounting Kit
MODEL: CFBUNKBRDC-10FT
Used on
2 x 4 x 10′ Black Marine Carpeted Bunk Board
This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340
These are used as the standard option for JBT-1600 'River Hawk' Trailer models, as well as an upgradeable option for the JBT-1400 model.
'River Hawk' Jon Boat Trailer Bunk Mounting Kit
MODEL: CFBUNKBRDC-10FT
2 x 4 x 16′ Black Marine Carpeted Bunk Board
$69.99 $65.00
Brand Com-Fab
General
2 x 4 x 16′ Black Marine Carpeted Bunk Board
This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340
These are used for PT-1618, and PT-1820 trailer models.
MODEL: CFBUNKBRDC-16FT
Used on
2 x 4 x 16′ Black Marine Carpeted Bunk Board
This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340
These are used for PT-1618, and PT-1820 trailer models.
MODEL: CFBUNKBRDC-16FT
2 x 4 x 2′ Black Marine Carpeted Bow Support Bunk
$12.50
Brand Com-Fab
General
2 x 4 x 2′ Black Marine Carpeted Bow Support Bunk
This item is mounted with a Jon Boat Trailer Bow Support Bunk Mounting Kit to all Jon Boat Trailer models except the JBT-1600 'River Hawk'.
MODEL: CFBOWSPRTC-2FT
Used on
2 x 4 x 2′ Black Marine Carpeted Bow Support Bunk
This item is mounted with a Jon Boat Trailer Bow Support Bunk Mounting Kit to all Jon Boat Trailer models except the JBT-1600 'River Hawk'.
MODEL: CFBOWSPRTC-2FT
2 x 4 x 5′ Black Marine Carpeted Bunk Board
$29.99 $25.00
Brand Com-Fab
General
2 x 4 x 5′ Black Marine Carpeted Bunk Board
These are used for PWT-800, and PWT-2212 trailer models.
Single PWC Zinc Bunk Mounting Kit
Single PWC Galvanized Bunk Mounting Kit
MODEL: CFBUNKBRDC-5FT
Used on
2 x 4 x 5′ Black Marine Carpeted Bunk Board
These are used for PWT-800, and PWT-2212 trailer models.
Single PWC Zinc Bunk Mounting Kit
Single PWC Galvanized Bunk Mounting Kit
MODEL: CFBUNKBRDC-5FT
2 x 4 x 6′ Black Marine Carpeted Bunk Board
$34.99 $30.00
Brand Com-Fab
General
2 x 4 x 6′ Carpeted Black Marine Bunk Board
These are used on PWT-1000, PWT-1100, PWT-2213, PWT-2214, and all Jon Boat Trailer models.
Jon Boat Trailer Bunk Mounting Kit
MODEL: CFBUNKBRDC-6FT
Used on
2 x 4 x 6′ Carpeted Black Marine Bunk Board
These are used on PWT-1000, PWT-1100, PWT-2213, PWT-2214, and all Jon Boat Trailer models.
Jon Boat Trailer Bunk Mounting Kit
MODEL: CFBUNKBRDC-6FT
2212B - Bunk Mounting Kit
$24.99
Brand Com-Fab
General
2212B - Bunk Mounting Kit
These are all of the requisite materials needed to mount a 2″ x 4″ x 5′ Black Marine Carpeted Bunk Board onto a 2212B trailer model.
Materials Include:
2 – 5"x 1.25" x .25" Zinc Flat Plate
2 – Galvanized Angular Swivel Bracket
4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw
MODEL: CFBNKKIT-2212B
Used on
PWT-2212B
2212B - Bunk Mounting Kit
These are all of the requisite materials needed to mount a 2″ x 4″ x 5′ Black Marine Carpeted Bunk Board onto a 2212B trailer model.
Materials Include:
2 – 5"x 1.25" x .25" Zinc Flat Plate
2 – Galvanized Angular Swivel Bracket
4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw
MODEL: CFBNKKIT-2212B
PWT-2212B
2213/4B - Bunk Mounting Kit
$29.99
Brand Com-Fab
General
2213/4B - Bunk Mounting Kit
These are all of the requisite materials needed to mount a 2" x 4" x 6' Black Marine Carpeted Bunk Board onto a 2213B trailer model. This kit can also be used to mount a 2" x 4" x 7' Black Marine Carpeted Bunk Board onto a 2214B trailer model.
Materials Include:
2 – 8.25" x 1.5" x .25" Zinc Flat Plate
2 – 3/8″-16 x 1" Zinc Hex Head Bolt
2 – Galvanized Angular Swivel Bracket
6 – 3/8″ Zinc Hex Flange Top Lock Nut
4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw
MODEL: CFBNKKIT-2213B
Used on
2213/4B - Bunk Mounting Kit
These are all of the requisite materials needed to mount a 2" x 4" x 6' Black Marine Carpeted Bunk Board onto a 2213B trailer model. This kit can also be used to mount a 2" x 4" x 7' Black Marine Carpeted Bunk Board onto a 2214B trailer model.
Materials Include:
2 – 8.25" x 1.5" x .25" Zinc Flat Plate
2 – 3/8″-16 x 1" Zinc Hex Head Bolt
2 – Galvanized Angular Swivel Bracket
6 – 3/8″ Zinc Hex Flange Top Lock Nut
4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw
MODEL: CFBNKKIT-2213B
2213/4G - Bunk Mounting Kit
$29.99
Brand Com-Fab
General
2213/4G - Bunk Mounting Kit
These are all of the requisite materials needed to mount a 2″ x 4″ x 6′ Black Marine Carpeted Bunk Board onto a 2213G trailer model. The kit can also be used to mount a 2″ x 4″ x 7′ Black Marine Carpeted Bunk Board onto a 2214G trailer model.
Materials Include:
2 – 8.25" x 1.5"x .25" Galvanized Flat Plate
2 – 3/8"-16 x 1" Galvanized Hex Head Cap Bolt
2 – Galvanized Angular Swivel Bracket
4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw
MODEL: CFBNKKIT-2213G
Used on
2213/4G - Bunk Mounting Kit
These are all of the requisite materials needed to mount a 2″ x 4″ x 6′ Black Marine Carpeted Bunk Board onto a 2213G trailer model. The kit can also be used to mount a 2″ x 4″ x 7′ Black Marine Carpeted Bunk Board onto a 2214G trailer model.
Materials Include:
2 – 8.25" x 1.5"x .25" Galvanized Flat Plate
2 – 3/8"-16 x 1" Galvanized Hex Head Cap Bolt
2 – Galvanized Angular Swivel Bracket
4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw
MODEL: CFBNKKIT-2213G
23.5″ Pontoon Boat Trailer Guide Post Assembly Kit
$49.99
Brand Com-Fab
General
23.5″ Pontoon Boat Trailer Guide Post Assembly
This assembly includes:
1 - 23.5″ Pontoon Guide Post, w/ 2″ x 4″ x 1′ carpeted wood bumpers
2 - 7/16" x 2.06" x 4.31" Galvanized U-Bolt
4 - 3/8″ Galvanized Flat Washer
4 - 7/16" Galvanized Tri-Lock Nut
MODEL: CFPOST-GUIDE(ASSM)
Used on
23.5″ Pontoon Boat Trailer Guide Post Assembly
This assembly includes:
1 - 23.5″ Pontoon Guide Post, w/ 2″ x 4″ x 1′ carpeted wood bumpers
2 - 7/16" x 2.06" x 4.31" Galvanized U-Bolt
4 - 3/8″ Galvanized Flat Washer
4 - 7/16" Galvanized Tri-Lock Nut
MODEL: CFPOST-GUIDE(ASSM)
2IN x 4IN Wide Black Plastic Bunk Covering
$3.40
Brand Com-Fab
General
Black Marine Plastic 2IN X 4IN Wide
$3.40/ft
- This plastic is used for bunks on all of our Pontoon Trailer models. It is optional for our Canoe/Kayak Angler Kits, PWC Trailer, and Jon Boat Trailer models.
If you are purchasing this Plastic it needs to be a foot longer than the board itself.
MODEL: CFBNKCOVER-PLASTIC(4IN-CA)
Used on
Optional for
PWT-2214G
JBT-900
JBT-1400
JBT-1600
JBT-1600 ‘RIVER HAWK
Black Marine Plastic 2IN X 4IN Wide
$3.40/ft
- This plastic is used for bunks on all of our Pontoon Trailer models. It is optional for our Canoe/Kayak Angler Kits, PWC Trailer, and Jon Boat Trailer models.
If you are purchasing this Plastic it needs to be a foot longer than the board itself.
MODEL: CFBNKCOVER-PLASTIC(4IN-CA)
Optional for
PWT-2214G
JBT-900
JBT-1400
JBT-1600
JBT-1600 ‘RIVER HAWK
2″ x 4″ x 7′ Black Marine Carpeted Bunk Board
$35.00
Brand Com-Fab
General
2″ x 4″ x 7′ Black Marine Carpeted Bunk Board
These are used for all PWT-1100, and PWT-2214 trailer models.
MODEL: CFBUNKBRDC-7FT
Used on
2″ x 4″ x 7′ Black Marine Carpeted Bunk Board
These are used for all PWT-1100, and PWT-2214 trailer models.
MODEL: CFBUNKBRDC-7FT
2″ x 4″ x 8′ Black Marine Carpeted Bunk Board
$40.00
Brand Com-Fab
General
2″ x 4″ x 8′ Black Marine Carpeted Bunk Board
These are used for our KCT angler kits
Used along with our Angler Kayak Trailer Bunk Mounting Kit
MODEL: CFBUNKBRDC-8FT
2″ x 4″ x 8′ Black Marine Carpeted Bunk Board
These are used for our KCT angler kits
Used along with our Angler Kayak Trailer Bunk Mounting Kit
MODEL: CFBUNKBRDC-8FT
2″ x 8″ x 10′ Black Marine Carpeted Center Walk Board
$79.99
Brand Com-Fab
2″ x 8″ x 10′ Black Marine Carpeted Center Walk Board
This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340
This item is used for all PWT-2213 trailer models. It is mounted to the center of the trailer frame with six 5/8″-16 x 1-1/2″ Galvanized Hex Head Lag Screws.
MODEL: CFWALKBRDC-10FT
Used on
3/8"-16 x 2.06" x 2.88" Galvanized U-Bolt
$5.99
Brand Com-Fab
General
3/8"-16 x 2.06" x 2.88" Galvanized U-Bolt
This item is part of the 1000G Bunk Mounting Kit used to mount bunks to PWT-800G, PWT-1000G, AND PWT-1100G trailer models.
MODEL: CFUBLT3/8X2.88G
Used on
3/8"-16 x 2.06" x 2.88" Galvanized U-Bolt
This item is part of the 1000G Bunk Mounting Kit used to mount bunks to PWT-800G, PWT-1000G, AND PWT-1100G trailer models.
MODEL: CFUBLT3/8X2.88G
3/8"-16 Zinc Hex Flange Top Lock Nut
$0.75
Brand Com-Fab
General
3/8"-16 Zinc Hex Flange Top Lock Nut Zinc
This item is part of the:
– 1000B - Bunk Mounting Kit
– 2212B - Fender Mounting Kit
– 2213B - Fender Mounting Kit
– Winch Poly Bow Roller Assembly
– Pontoon Boat Trailer Winch Assembly
MODEL: CFNUT3/8LOCKZ
Used on
ALL COM-FAB TRAILER MODELS
3/8"-16 Zinc Hex Flange Top Lock Nut Zinc
This item is part of the:
– 1000B - Bunk Mounting Kit
– 2212B - Fender Mounting Kit
– 2213B - Fender Mounting Kit
– Winch Poly Bow Roller Assembly
– Pontoon Boat Trailer Winch Assembly
MODEL: CFNUT3/8LOCKZ
ALL COM-FAB TRAILER MODELS
3/8”-16 x 2.06” x 2.88” Zinc U-Bolt
$5.99
Brand Com-Fab
General
3/8”-16 x 2.06” x 2.88” Zinc U-Bolt
This item is part of the 1000B - Bunk Mounting Kit used to mount bunks onto PWT-800B, PWT-1000B, AND PWT-1100B trailer models.
MODEL: CFUBLT3/8X2.88Z
Used on
3/8”-16 x 2.06” x 2.88” Zinc U-Bolt
This item is part of the 1000B - Bunk Mounting Kit used to mount bunks onto PWT-800B, PWT-1000B, AND PWT-1100B trailer models.
MODEL: CFUBLT3/8X2.88Z
3/8″-16 x 2.06″ x 5.25″ Zinc U-Bolt
$5.99
Brand Com-Fab
General
3/8″-16 x 2.06″ x 5.25″ Zinc U-Bolt
This item is used with a 4" x 1" x .25" Galvanized Flat Plates w/ 1/2" Holes, and a 3/8"-16 Serrated Zinc Flange Nuts to mount Pontoon Boat Trailer Bunk Brackets onto all Pontoon Boat Trailer models.
See: Tall Galvanized Pontoon Boat Trailer Bunk Bracket Kit
MODEL: CFUBLT3/8X2.06X5.25Z
Used on
3/8″-16 x 2.06″ x 5.25″ Zinc U-Bolt
This item is used with a 4" x 1" x .25" Galvanized Flat Plates w/ 1/2" Holes, and a 3/8"-16 Serrated Zinc Flange Nuts to mount Pontoon Boat Trailer Bunk Brackets onto all Pontoon Boat Trailer models.
See: Tall Galvanized Pontoon Boat Trailer Bunk Bracket Kit
MODEL: CFUBLT3/8X2.06X5.25Z
3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt
$5.99
Brand Com-Fab
General
3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt
This item is a part of these kits:
- Jon Boat Trailer Bunk Mounting Kit
- Jon Boat Trailer Fender Mounting Kit
- 'River Hawk' Jon Boat Trailer Bunk Mounting Kit
TIE DOWN MODEL: #83027G
MODEL: CFUBLT3/8X2.38G
Used on
3/8″-16 x 3.06" x 2.38″ Zinc U-Bolt
$5.99
Brand Com-Fab
General
3/8″-16 x 3.06" x 2.38″ Zinc U-Bolt
This item is part of these kits:
TIEDOWN: 83027Z
MODEL: CFUBLT3/8X2.38Z
Used on
3/8″-16 x 3.06" x 2.38″ Zinc U-Bolt
This item is part of these kits:
TIEDOWN: 83027Z
MODEL: CFUBLT3/8X2.38Z