X

Side Mount Spare Tire Carrier

$23.50

Brand Com-Fab


Installation Instructions:

1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.

2. Slide U-bolt around the frame and through the holes in tire carrier.

3. Mount with flat washers, lock washers and nuts provided.

4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.

5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.

6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.

7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.

More Details →
X

5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw

$0.30

Brand Com-Fab


General

5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw

It is used for mounting Bunk Boards to Galvanized Angular Swivel Brackets, and Pontoon Boat Trailer Bunk Brackets on all trailer models.

MODEL: CFSCRWLAG-5/16-0150

Used on

ALL COM-FAB TRAILER MODELS

More Details →
X

Locking Spare Tire Bracket, Fits 3″ Width Tubing

$9.99

Brand Com-Fab


General

Locking Spare Tire Bracket, fits 3″ Width Tubing

This item is used to lock down, and transport a spare tire on all Com-Fab trailer models. Lock not included.

MODEL: CFSTB

Optional for

ALL COM-FAB TRAILER MODELS

More Details →
X

Galvanized Angular Swivel Bracket - 7/16″ Top Hole

$2.99

Brand Com-Fab


General

Galvanized Angular Swivel Bracket - 7/16″ Top Hole

These are used to mount bunk boards onto all Jon Boat, and PWT Trailer models.

This item is part of these kits:

1000B - Bunk Mounting Kit

1000G - Bunk Mounting Kit

2212B - Bunk Mounting Kit

2212G - Bunk Mounting Kit

2213B - Bunk Mounting Kit

2213G - Bunk Mounting Kit

Jon Boat Trailer Bunk Mounting Kit

Jon Boat Trailer Bow Support Mounting Kit

'River Hawk' Jon Boat Trailer Bunk Mounting Kit

MODEL: CFBRKTSWIVEL

Used on

PWT-800B
PWT-800G
PWT-1000B
PWT-1000G
PWT-1100B
PWT-1100G
PWT-2212B
PWT-2212G
PWT-2213B
PWT-2213G
PWT-2214B
PWT-2214G
JBT-900
JBT-1400
JBT-1600
JBT-1600 ‘RIVER HAWK’
More Details →
X

3/8″-16 Galvanized Tri-Lock Nut

$0.25

Brand Com-Fab


General

3/8″- 16 Galvanized Tri-Lock Nut

This item pairs with any 3/8"-16 Thread Galvanized Bolt or U-Bolt.

This item is part of these kits:

Galvanized Winch Assembly Mounting Kit

Galvanized Tie Plate Kit for 1.5" Square Axle Tubing

1000G - Bunk Mounting Kit

2212G - Bunk Mounting Kit

2212G - Fender Mounting Kit

2213G - Bunk Mounting Kit

2213G - Fender Mounting Kit

Jon Boat Trailer Bunk Mounting Kit

Jon Boat Trailer Fender Mounting Kit

Jon Boat Trailer Bow Support Bunk Mounting Kit

'River Hawk' Jon Boat Trailer Bunk Mounting Kit

MODEL: CFNUT3/8TRILOCK

Used on

PWT-800G
PWT-1000G
PWT-1100G
PWT-2212G
PWT-2212B
PWT-2213G
PWT-2214G
JBT-900
JBT-1400
JBT-1600
JBT-1600 ‘RIVER HAWK’
PT-1400
More Details →
X
Sold Out

1/2" x 2-5/8" Disc Brake Caliper Slider Pin

$5.99

Brand Com-Fab

This product is sold out


General

Tie Down 1/2" x 2-5/8" Disc Brake Caliper Slider Pin

This item is used for mounting a Tie Down caliper to a 9.6" vented rotor. Stainless steel caliper slide pins are easily accessible with hex heads for quick removal. It allows the caliper to float freely and insures proper alignment during installation. It fits all vented rotor calipers.

TIE DOWN MODEL: 44676G

MODEL: CFAXLE-PIN(SLIDER)

Used on

PT-2022
PT-2224
PT-2426
More Details →
X

1/2″-20 Lug Nut

$0.75

Brand Com-Fab


General

1/2″-20 Lug Nut

These are used for mounting tires on all trailer models to 1 1/2"-20 Threaded Stud.

MODEL: CFNUTLUG

Used on

ALL COMFAB TRAILER MODELS

More Details →
X

Galvanized Bow Stop Bracket

$7.99

Brand Com-Fab


General

Galvanized Bow Stop Bracket

This item is part of the Winch Poly Bow Roller Assembly used on every type of winch stand for all Jon Boat, and PWT trailer models.

MODEL: CFBRKTWNCHRLR

Used on

PWT-800B
PWT-800G
PWT-1000B
PWT-1000G
PWT-1100B
PWT-1100G
PWT-2212B
PWT-2212G
PWT-2213B
PWT-2213G
PWT-2214B
PWT-2214G
JBT-900
JBT-1400
JBT-1600
JBT-1600 ‘RIVER HAWK’
More Details →
X

4" x 1" x .25" Galvanized Flat Plate w/ 1/2" Holes

$1.99

Brand Com-Fab


General

4" x 1" x .25" Galvanized Flat Plate w/ 2 1/2" Holes and a 2.5" Hole Center

- This item is part of the 1000G - Bunk Mounting Kit to mount Bunk Boards onto PWT-800G, PWT-1000G, and PWT-1100G trailer models.

- This item is part of the Tall Galvanized Bunk Bracket Kit used to mount mount 2″ x 4″ or 2″ x 6″ bunk boards on all Pontoon Boat Trailer models.

MODEL: CFFLTSTRPBUNK(SGL)G

Used on

PWT-800G
PWT-1000G
PWT-1100G
PT-1400
PT-1618
PT-1820
PT-2022
PT-2224
PT-2426
More Details →
X

Zinc Cotter Pin for Axle Spindle 5/32" x 2"

$0.50

Brand Com-Fab


General

TIE DOWN 5/32" x 2" Zinc Cotter Pin for Axle Spindle

It is used for fastening the Castle Nut to the Axle Spindle.

TIE DOWN MODEL: #10560

MODEL: CFAXLE-PIN(COTTER)

Used on

ALL COM-FAB TRAILER MODELS

More Details →
X

3/8"-16 Zinc Hex Flange Top Lock Nut

$0.25

Brand Com-Fab


General

3/8"-16 Zinc Hex Flange Top Lock Nut Zinc

This item is part of the:

1000B - Bunk Mounting Kit

2212B - Fender Mounting Kit

2213B - Fender Mounting Kit

– Winch Poly Bow Roller Assembly

– Pontoon Boat Trailer Winch Assembly

MODEL: CFNUT3/8LOCKZ

Used on

ALL COM-FAB TRAILER MODELS

More Details →
X

3/8″ Galvanized Flat Washer

$0.20

Brand Com-Fab


General

3/8″ Galvanized Flat Washer

This item is part of the:

Galvanized Winch Assembly Mounting Kit

2212G - Bunk Mounting Kit

2212G - Fender Mounting Kit

Jon Boat Trailer Bunk Mounting Kit

Jon Boat Trailer Bow Support Bunk Mounting Kit

'River Hawk' Jon Boat Trailer Bunk Support Mounting Kit

MODEL: CFWSHR3/8G

Used on

PWT-800G
PWT-1000G
PWT-1100G
PWT-2212B
PWT-2212G
PWT-2213G
PWT-2214G
JBT-900
JBT-1400
JBT-1600
JBT-1600 'RIVER HAWK'
PT-1400
More Details →
X

3/8"-16 x 2.06" x 2.88" Galvanized U-Bolt

$1.99

Brand Com-Fab


General

3/8"-16 x 2" x 2.88" Galvanized U-Bolt

This item is part of the 1000G Bunk Mounting Kit used to mount bunks to PWT-800G, PWT-1000G, AND PWT-1100G trailer models.

MODEL: CFUBLT3/8X2.88G

Used on

PWT-800G
PWT-1000G
PWT-1100G
More Details →
X

3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt 

$1.99

Brand Com-Fab


General

3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt 

This item is a part of these kits:

- 2213G - Bunk Mounting Kit

- 2212G - Bunk Mounting Kit

- 2212G - Fender Mounting Kit

- Jon Boat Trailer Bunk Mounting Kit

- Jon Boat Trailer Fender Mounting Kit

- 'River Hawk' Jon Boat Trailer Bunk Mounting Kit

TIE DOWN MODEL: #83027G

MODEL: CFUBLT3/8X2.38G

Used on

PWT-2212G
PWT-2213G
PWT-2214G
JBT-900
JBT-1400
JBT-1600
JBT-1600 'RIVER HAWK'
More Details →
X

3/8"-16 x 1" Galvanized Hex Head Cap Bolt

$0.25

Brand Com-Fab


General

3/8"-16 x 1" Galvanized Hex Head Cap Bolt

This item is typically used with a 3/8"-16 Galvanized Tri-Lock Nut.

This item is part of these kits:

2213G Bunk Mounting Kit

Jon Boat Trailer Bunk Mounting Kit

Jon Boat Trailer Bow Support Bunk Mounting Kit

'River Hawk' Jon Boat Trailer Bunk Mounting Kit

MODEL: CFBLT3/8X1G

Used on

PWT-2213G
PWT-2214G
JBT-900
JBT-1400
JBT-1600
JBT-1600 'RIVER HAWK'
More Details →
X

1/2"-13 x 2.06" x 4.31" Galvanized U-Bolt

$4.99

Brand Com-Fab


General

1/2"-13 x 2.06" x 4.31" Galvanized U-Bolt

- This item is part of the BATIE190G Galvanized Tie Plate Kit used to mount 5-Leaf Slipper Springs (1,250 lb) to 2" Galvanized Axle Tubing for all PWT-2213G, and PWT-2214G trailer models.

- This item is part of the 7000# Galvanized Tie Plate Kit used to mount 3-Leaf Double Eye Springs (1850 lb) to 2" Galvanized Axle Tubing for all Pontoon Boat Trailer models.

TIE DOWN MODEL: #84404G

MODEL: CFAXLE-UBLT(2.0SQ-G)

Used on

PWT-2213G
PWT-2214G
PT-1618
PT-1820
PT-2022
PT-2224
PT-2426
More Details →
X

9/16"-18 x 3" Shackle Bolt

$2.25

Brand Com-Fab


General

9/16"-18 x 3" Shackle Bolt

- This item is part of the Pontoon Boat Trailer Single Axle Mounting Kit used to mount 3500 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles to all Single Axle Pontoon Boat Trailer models.

- This item is part of the Pontoon Boat Trailer Tandem Axle Mounting Kit used to mount two 3500 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles to all Tandem Axle Pontoon Boat Trailer models.

MODEL: CFAXLE-BLT(SHACKLE-Z)

Used on

PT-1618
PT-1820
PT-2022
PT-2224
PT-2426
More Details →
X

3/8″-16 x 3.75″ Zinc Hex Head Cap Bolt

$1.50

Brand Com-Fab


General

3/8″-16 x 3.75″ Zinc Hex Head Cap Bolt

This item is part of these kits:

Winch Poly Bow Roller Assembly

5″ Poly Keel Roller Assembly

MODEL: CFBLT3/8X3.75Z

Used on

JBT-900
JBT-1400
JBT-1600
More Details →
X
Sale

Lug Nut Stud 1-1/2"-20

$2.79 $1.99

Brand Com-Fab


General

1-1/2"-20 Lug Nut Stud

The stud material is SAE grade 8, zinc dichromate plated, with a minimum 96 hour salt spray requirement. 

1/2"-20 Lug Nut

MODEL: CFAXLE-BLT(STUD1-1/2)

Used For

ALL COM-FAB TRAILER MODELS

More Details →
X

3/8″-16 x 3.06" x 2.38″ Zinc U-Bolt

$1.99

Brand Com-Fab


General

3/8″-16 x 3.06" x 2.38″ Zinc U-Bolt

This item is part of these kits:

- 2213B - Bunk Mounting Kit

- 2212B - Bunk Mounting Kit

- 2212B - Fender Mounting Kit

TIEDOWN: 83027Z

MODEL: CFUBLT3/8X2.38Z

Used on

PWT-2212B
PWT-2213B
PWT-2214B
More Details →
X

1/2″-13 Galvanized Tri-Lock Nut

$0.35

Brand Com-Fab


General

1/2″- 13 Thread Galvanized Tri-Lock Nut

- This item is part of the Galvanized Axle Mounting Kit used to mount all galvanized axles to galvanized trailer frames.

- This item is part of the BATIE190G Tie Plate Kit used to mount 5-Leaf Slipper Springs (1,250 lb) to 2" Galvanized Square Axles for the PWT-2213G, and the PWT-2214G trailer models. 

-This item is part of the 7000# Galvanized Tie Plate Kit used to mount 3-Leaf Double Eye Springs (1850 lb) to 2" Galvanized Square Axles for all Pontoon Boat Trailer models.

MODEL: CFNUT1/2TRILOCK

Used on

PWT-800G
PWT-1000G
PWT-1100G
PWT-2212G
PWT-2213G
PWT-2214G
JBT-900
JBT-1400
JBT-1600
JBT-1600 'RIVER HAWK'
PT-1400
PT-1618
PT-1820
PT-2022
PT-2224
PT-2426
More Details →
X

9/16"-18 Nylock Nut

$1.53

Brand Com-Fab


General

9/16"-18 Nylock Nut

- This item is part of the Pontoon Boat Trailer Single Axle Mounting Kit used for mounting 3500 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles to all Single Axle Pontoon Boat Trailer models.

- This item is part of the Pontoon Boat Trailer Tandem Axle Mounting Kit used to mount two 3500 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles to all Tandem Axle Pontoon Boat Trailer models.

MODEL: CFAXLE-NUT(1/2NYLOCK-Z)

Used on

PT-1618
PT-1820
PT-2022
PT-2224
PT-2426
More Details →
X

3/8"-16 x 1.56" x 3.63" Zinc U-Bolt

$2.25

Brand Com-Fab


General

3/8"-16 x 1.56" x 3.63" Zinc U-Bolt

This item is part of the Zinc Axle Tie Plate Kit used to mount 2-Leaf Slipper Springs (550 lb), and 3-Leaf Slipper Springs (750 lb) to 1.5" Square Axle Tubing.

    TIE DOWN MODEL: #83002Z

    MODEL: CFAXLE-UBLT(1.5SQ-Z)

    Used on

    PWT-800B
    PWT-800G
    PWT-1000B
    PWT-1100B
    PWT-2212B
    More Details →
    X

    3/8″-16 x 3.06" x 4.5″ Galvanized U-Bolt

    $2.99

    Brand Com-Fab


    General

    3/8″-16 x 3.06" x 4.5″ Galvanized U-Bolt

    This item is part of these kits:

    - Galvanized Winch Assembly Mounting Kit

    - Jon Boat Trailer Bow Support Bunk Mounting Kit

    MODEL: CFUBLT3/8X4.5G

    Used on

    PWT-800G
    PWT-1000G
    PWT-1100G
    PWT-2213G
    PWT-2214G
    JBT-900
    JBT-1400
    JBT-1600
    More Details →