X

2 Capacity Canoe/Kayak Conversion Kit

$339.99

Brand Com-Fab

SKU: CFKIT-KAY(2)

General

2 Capacity Canoe/Kayak Conversion Kit

Universal canoe/kayak trailer conversion kit for up to 2 canoes or 2 kayaks without plastic protective covering.

One size fits all trailer kit:

- Designed to hold 2 kayak/canoes

- Adjustable crossbeam placement to fit a wide range of needs and preferences

- Fits on 1.5", 2", 3" rectangular and/or square tubing where applicable

- 2x2x11 gauge upright bracing for universal fit

- 2x2x14 gauge cross braces

This is a conversion kit only and requires a trailer to mount.

Click the following link for Assembly Instructions

https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf

Specifications

Kayak Setup - CFKIT-KAY(2)

  • 2x 24" Uprights 
  • 2x 60" Crossbeams with Strap Assist and End Caps
  • 2x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
  • 4x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
  • 4x Zinc U Bolts with Washer and Nut for Securing Crossbeams
  • 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
  • 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
  • 4x Turned Eye Bolts for use with Tie Downs
  • 8x Galvanized Lock Nuts for locking in Eye Bolts

Canoe Setup - CFKIT-CAN(2)

  • 2x 24" Uprights 
  • 2x 80" Crossbeams with Strap Assist and End Caps
  • 2x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
  • 4x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
  • 4x Zinc U Bolts with Washer and Nut for Adjusting and Securing Crossbeams
  • 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
  • 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
  • 4x Turned Eye Bolts for Securing Tie Downs
  • 8x Galvanized Lock Nuts for Securing Eye Bolts

Click the following link for Assembly Instructions

https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf


More Details →
X

3 Capacity Canoe/Kayak Conversion Kit

$409.99

Brand Com-Fab

SKU: CFKIT-KAY(3)

General

3 Capacity Canoe/Kayak Conversion Kit

Canoe/kayak trailer conversion kit for up to 3 kayaks or 3 canoes without plastic protective covering.

- Designed to hold 3 kayaks/canoes

- Fits on 1.5", 2", 3" rectangular and/or square tubing where applicable.

- 2x2x11 gauge upright bracing for universal fit.

- 2x2x14 gauge cross braces

This is a conversion kit only and requires a separate trailer to mount.

Click the following link for Assembly Instructions

https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf

Specifications

Kayak Setup - CFKIT-KAY(3)

  • 2x 30" Uprights 
  • 2x 48" Crossbeams with Strap Assist and End Caps
  • 2x 60" Crossbeams with Strap Assist and End Caps
  • 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
  • 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
  • 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
  • 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
  • 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
  • 8x Turned Eye Bolts for use with Tie Downs
  • 16x Galvanized Lock Nuts for locking in Eye Bolts

Canoe Setup - CFKIT-CAN(3)

  • 2x 30" Uprights 
  • 2x 48" Crossbeams with Strap Assist and End Caps
  • 2x 80" Crossbeams with Strap Assist and End Caps
  • 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
  • 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
  • 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
  • 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
  • 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
  • 8x Turned Eye Bolts for use with Tie Downs
  • 16x Galvanized Lock Nuts for locking in Eye Bolts

Click the following link for Assembly Instructions

https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf


More Details →
X

4 Capacity Canoe/Kayak Conversion Kit

$529.99

Brand Com-Fab

SKU: CFKIT-KAY(4S)

General

4 Capacity Canoe/Kayak Conversion Kit

Universal canoe/kayak trailer conversion kit for up to 4 kayaks or 4 canoes without plastic protective covering.

One size fits all trailer kit:

- Designed to hold 4 regular sized kayaks or canoes

- Fits on 1.5", 2", 3" rectangular and/or square tubing where applicable.

- 2x2x11 gauge upright bracing for universal fit.

- 2x2x14 gauge cross braces with stability slides, preventing side-to-side movement. (Optional)

This is a conversion kit only and requires a separate trailer to mount.

Click the following link for Assembly Instructions

https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf

Specifications

4 Capacity Normal Kayak Kit - CFKIT-KAY(4S)

  • 2x 30" Uprights 
  • 4x 60" Crossbeams with Strap Assist and End Caps
  • 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
  • 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
  • 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
  • 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
  • 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
  • 8x Turned Eye Bolts for use with Tie Downs
  • 16x Galvanized Lock Nuts for locking in Eye Bolts

4 Capacity Tall Kayak Kit - CFKIT-KAY(4T)

  • 2x 40" Uprights
  • 4x 60" Crossbeams with Strap Assist and End Caps
  • 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
  • 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
  • 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
  • 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
  • 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
  • 8x Turned Eye Bolts for use with Tie Downs
  • 16x Galvanized Lock Nuts for locking in Eye Bolts

4 Capacity Normal Canoe Kit - CFKIT-CAN(4S)

  • 2x 40" Uprights 
  • 4x 80" Crossbeams with Strap Assist and End Caps
  • 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
  • 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
  • 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
  • 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
  • 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
  • 8x Turned Eye Bolts for use with Tie Downs
  • 16x Galvanized Lock Nuts for locking in Eye Bolts

4 Capacity Tall Canoe Kit - CFKIT-CAN(4T)

  • 2x 48" Uprights 
  • 4x 80" Crossbeams with Strap Assist and End Caps
  • 2x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
  • 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
  • 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
  • 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
  • 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
  • 8x Turned Eye Bolts for use with Tie Downs
  • 16x Galvanized Lock Nuts for locking in Eye Bolts

* The tubing size of the trailer will determine which U Bolts will be needed to secure the uprights to the frame

Click the following link for Assembly Instructions

https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf

More Details →
X

6 Capacity Canoe/Kayak Conversion Kit

$729.99

Brand Com-Fab

SKU: CFKIT-KAY(6S)

General

6 Capacity Canoe/Kayak Conversion Kit

Canoe/kayak trailer conversion kit for up to 6 canoes or 6 kayaks without plastic protective covering.

One size fits all trailer kit:

- Designed to hold 6 regular sized canoes/kayaks

- Fits on 1.5", 2", 3" rectangular and/or square tubing where applicable.

- 2 x 2 x 11 gauge upright bracing for universal fit.

- 2 x 2 x 14 gauge cross braces

This is a conversion kit only and requires a separate trailer to mount.

Click the following link for Assembly Instructions

https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf

Specifications

6 Capacity Normal Kayak Kit - CFKIT-KAY(6S)

  • 2x 48" Uprights
  • 6x 60" Crossbeams with Strap Assist and End Caps
  • 6x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
  • 12x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
  • 12x Zinc U Bolts with Washer and Nut for Securing Crossbeams
  • 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
  • 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
  • 12x Turned Eye Bolts for use with Tie Downs
  • 24x Galvanized Lock Nuts for locking in Eye Bolts

6 Capacity Tall Kayak Kit - CFKIT-KAY(6T)

  • 2x 60" Uprights 
  • 6x 60" Crossbeams with Strap Assist and End Caps
  • 6x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
  • 12x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
  • 12x Zinc U Bolts with Washer and Nut for Securing Crossbeams
  • 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
  • 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
  • 12x Turned Eye Bolts for use with Tie Downs
  • 24x Galvanized Lock Nuts for locking in Eye Bolts

6 Capacity Normal Canoe Kit - CFKIT-CAN(6S)

  • 2x 60" Uprights 
  • 6x 80" Crossbeams with Strap Assist and End Caps
  • 6x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
  • 12x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
  • 12x Zinc U Bolts with Washer and Nut for Securing Crossbeams
  • 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
  • 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
  • 12x Turned Eye Bolts for use with Tie Downs
  • 24x Galvanized Lock Nuts for locking in Eye Bolts

6 Capacity Tall Canoe Kit - CFKIT-CAN(6T)

  • 2x 72" Uprights 
  • 6x 80" Crossbeams with Strap Assist and End Caps
  • 6x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
  • 12x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
  • 12x Zinc U Bolts with Washer and Nut for Securing Crossbeams
  • 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
  • 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
  • 12x Turned Eye Bolts for use with Tie Downs
  • 24x Galvanized Lock Nuts for locking in Eye Bolts

Click the following link for Assembly Instructions

https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf


More Details →
X
Sale

Square Tubing Plug for 2" Square Tubing (10-14GA)

$5.99 $1.25

Brand Com-Fab

SKU: CFCAP-2X2(10-14GA)

General

2x2 Square Tubing Plug for 10-14 GA

This item is used on Pontoon Winch Stands & Canoe/Kayak Crossbars and Uprights. It may also be used in other applications utilizing 2" square tubing.

This item is part of these kits:

2 Capacity Canoe/Kayak Kit

3 Capacity Canoe/Kayak Kit

4 Capacity Canoe/Kayak Kit

2 Canoe + 2 Kayak Kit

6 Capacity Canoe/Kayak Kit

MODEL: CFCAP-2X2(10-14GA)

Used On

PT-1618
PT-1820
PT-2022
PT-2224
PT-2426
PT-2628
More Details →
X

Angler Kayak Trailer Bunk Mounting Kit

$19.99

Brand Com-Fab

SKU: CFBNKKIT-KAY/CAN(ANGLER-MNT)

This kit contains all of the materials necessary to mount a bunk on one of our canoe or kayak trailers. The kit contains:

2 – 3/8”-16 x 2.06” x 2.88” Zinc U-Bolt
2 – 4" x 1" x .25" Zinc Flat Plate
2 – Galvanized Angular Swivel Bracket
4 – 3/8"-16 Serrated Zinc Flange Nut

4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw


More Details →
X

AstroSlicks Plastic Padding for Canoe/Kayak Trailers and Kits

$4.99

Brand Com-Fab Trailers

SKU: CFGUARD-POLYSLICK(12)

These are the plastic protectors for your canoes and kayaks that go on our 1.5" square tubing, though applications are not limited to that particular tubing only. They ship with self tapping mounting screws depending on the length of padding.
More Details →
X

4.80x12 C Load Range Bias 12IN Series 07 Gun Metal V-Spoke 545 Hole Pattern Aluminum Tire/Wheel Assembly

$134.99

Brand Com-Fab Trailers

SKU: CFT48012-VSPOKE(GM)-LRC

4.80x12 Gun Metal V-Spoke 545 Hole Pattern Aluminum Tire & Wheel Load Range C; Bias

This is the tire and wheel used on the PWT1100AL model and optional for PWT-800, PWT-1000, PWT-1100, and PWT-2212 black powder coated and galvanized trailer models. Speed rating 81 mph.

More Details →