Angler Kayak Trailer Bunk Mounting Kit
$19.99
This kit contains all of the materials necessary to mount a bunk on one of our canoe or kayak trailers. The kit contains:
2 – 3/8”-16 x 2.06” x 2.88” Zinc U-Bolt
2 – 4" x 1" x .25" Zinc Flat Plate
2 – Galvanized Angular Swivel Bracket
4 – 3/8"-16 Serrated Zinc Flange Nut
4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw
You might also like
2 Capacity Canoe/Kayak Conversion Kit
$339.99
Brand Com-Fab
General
2 Capacity Canoe/Kayak Conversion Kit
Universal canoe/kayak trailer conversion kit for up to 2 canoes or 2 kayaks without plastic protective covering.
One size fits all trailer kit:
- Designed to hold 2 kayak/canoes
- Adjustable crossbeam placement to fit a wide range of needs and preferences
- Fits on 1.5", 2", 3" rectangular and/or square tubing where applicable
- 2x2x11 gauge upright bracing for universal fit
- 2x2x14 gauge cross braces
This is a conversion kit only and requires a trailer to mount.
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
Specifications
Kayak Setup - CFKIT-KAY(2)
- 2x 24" Uprights
- 2x 60" Crossbeams with Strap Assist and End Caps
- 2x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 4x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 4x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 4x Turned Eye Bolts for use with Tie Downs
- 8x Galvanized Lock Nuts for locking in Eye Bolts
Canoe Setup - CFKIT-CAN(2)
- 2x 24" Uprights
- 2x 80" Crossbeams with Strap Assist and End Caps
- 2x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 4x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 4x Zinc U Bolts with Washer and Nut for Adjusting and Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 4x Turned Eye Bolts for Securing Tie Downs
- 8x Galvanized Lock Nuts for Securing Eye Bolts
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
3 Capacity Canoe/Kayak Conversion Kit
$409.99
Brand Com-Fab
General
3 Capacity Canoe/Kayak Conversion Kit
Canoe/kayak trailer conversion kit for up to 3 kayaks or 3 canoes without plastic protective covering.
- Designed to hold 3 kayaks/canoes
- Fits on 1.5", 2", 3" rectangular and/or square tubing where applicable.
- 2x2x11 gauge upright bracing for universal fit.
- 2x2x14 gauge cross braces
This is a conversion kit only and requires a separate trailer to mount.
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
Specifications
Kayak Setup - CFKIT-KAY(3)
- 2x 30" Uprights
- 2x 48" Crossbeams with Strap Assist and End Caps
- 2x 60" Crossbeams with Strap Assist and End Caps
- 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
Canoe Setup - CFKIT-CAN(3)
- 2x 30" Uprights
- 2x 48" Crossbeams with Strap Assist and End Caps
- 2x 80" Crossbeams with Strap Assist and End Caps
- 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
4 Capacity Canoe/Kayak Conversion Kit
$529.99
Brand Com-Fab
General
4 Capacity Canoe/Kayak Conversion Kit
Universal canoe/kayak trailer conversion kit for up to 4 kayaks or 4 canoes without plastic protective covering.
One size fits all trailer kit:
- Designed to hold 4 regular sized kayaks or canoes
- Fits on 1.5", 2", 3" rectangular and/or square tubing where applicable.
- 2x2x11 gauge upright bracing for universal fit.
- 2x2x14 gauge cross braces with stability slides, preventing side-to-side movement. (Optional)
This is a conversion kit only and requires a separate trailer to mount.
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
Specifications
4 Capacity Normal Kayak Kit - CFKIT-KAY(4S)
- 2x 30" Uprights
- 4x 60" Crossbeams with Strap Assist and End Caps
- 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
4 Capacity Tall Kayak Kit - CFKIT-KAY(4T)
- 2x 40" Uprights
- 4x 60" Crossbeams with Strap Assist and End Caps
- 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
4 Capacity Normal Canoe Kit - CFKIT-CAN(4S)
- 2x 40" Uprights
- 4x 80" Crossbeams with Strap Assist and End Caps
- 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
4 Capacity Tall Canoe Kit - CFKIT-CAN(4T)
- 2x 48" Uprights
- 4x 80" Crossbeams with Strap Assist and End Caps
- 2x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
* The tubing size of the trailer will determine which U Bolts will be needed to secure the uprights to the frame
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
6 Capacity Canoe/Kayak Conversion Kit
$729.99
Brand Com-Fab
General
6 Capacity Canoe/Kayak Conversion Kit
Canoe/kayak trailer conversion kit for up to 6 canoes or 6 kayaks without plastic protective covering.
One size fits all trailer kit:
- Designed to hold 6 regular sized canoes/kayaks
- Fits on 1.5", 2", 3" rectangular and/or square tubing where applicable.
- 2 x 2 x 11 gauge upright bracing for universal fit.
- 2 x 2 x 14 gauge cross braces
This is a conversion kit only and requires a separate trailer to mount.
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
Specifications
6 Capacity Normal Kayak Kit - CFKIT-KAY(6S)
- 2x 48" Uprights
- 6x 60" Crossbeams with Strap Assist and End Caps
- 6x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 12x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 12x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 12x Turned Eye Bolts for use with Tie Downs
- 24x Galvanized Lock Nuts for locking in Eye Bolts
6 Capacity Tall Kayak Kit - CFKIT-KAY(6T)
- 2x 60" Uprights
- 6x 60" Crossbeams with Strap Assist and End Caps
- 6x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 12x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 12x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 12x Turned Eye Bolts for use with Tie Downs
- 24x Galvanized Lock Nuts for locking in Eye Bolts
6 Capacity Normal Canoe Kit - CFKIT-CAN(6S)
- 2x 60" Uprights
- 6x 80" Crossbeams with Strap Assist and End Caps
- 6x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 12x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 12x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 12x Turned Eye Bolts for use with Tie Downs
- 24x Galvanized Lock Nuts for locking in Eye Bolts
6 Capacity Tall Canoe Kit - CFKIT-CAN(6T)
- 2x 72" Uprights
- 6x 80" Crossbeams with Strap Assist and End Caps
- 6x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 12x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 12x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 12x Turned Eye Bolts for use with Tie Downs
- 24x Galvanized Lock Nuts for locking in Eye Bolts
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
