Canoe and Kayak Trailer Kits
A Smart Option for All Enthusiasts
Our newest line of products feature a variety of setup options for converting existing trailers into canoe and kayak trailers! Most personal watercraft, jon boat, and other marine trailers are compatible with our system, even if they aren't Com-Fabs! Best of all, the attachment is not permanent and allows you to switch your trailer back to its previous setup whenever you desire. If you have questions about setup or compatibility, feel free to contact us.
- Fits on 1.5", 2" or 3" square or rectangular tubing
- Kits and bracing available for 2, 3, 4 or 6 canoe or kayak setups
- Uprights in 24", 30", 40", 48", 60" or 66" available depending on model
- 2x2x11 gauge upright bracing
- Crossbeams in 48" (top mount), 60" (kayak), or 80" (canoe) available
- 2x2x14 gauge crossbeams with steel channels for added stability
*Note: Canoe/Kayak kits have been updated. They now feature dual steel rings on each side of the crossbeam with available plastic protective padding.*
This is a Trailer Conversion Kit only and DOES NOT include a trailer
Angler Kayak Trailer Bunk Mounting Kit
$19.99
Brand Com-Fab
This kit contains all of the materials necessary to mount a bunk on one of our canoe or kayak trailers. The kit contains:
2 – 3/8”-16 x 2.06” x 2.88” Zinc U-Bolt
2 – 4" x 1" x .25" Zinc Flat Plate
2 – Galvanized Angular Swivel Bracket
4 – 3/8"-16 Serrated Zinc Flange Nut
4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw
This kit contains all of the materials necessary to mount a bunk on one of our canoe or kayak trailers. The kit contains:
2 – 3/8”-16 x 2.06” x 2.88” Zinc U-Bolt
2 – 4" x 1" x .25" Zinc Flat Plate
2 – Galvanized Angular Swivel Bracket
4 – 3/8"-16 Serrated Zinc Flange Nut
4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw
AstroSlicks Plastic Padding for Canoe/Kayak Trailers and Kits
$4.99
Brand Com-Fab Trailers
14GA Galvanized Upright
$65.00
Brand Com-Fab Trailers
14GA Galvanized Upright for Canoe/Kayak Kit. Available in 40", 48", 60", and 72".
14GA Galvanized Upright for Canoe/Kayak Kit. Available in 40", 48", 60", and 72".
2IN Kayak/Canoe Trailer Upright Mounting Kit
$12.99
Brand Com-Fab
General
Kayak/Canoe Trailer Upright Mounting Kit
This kit is used to mount uprights on all Kayak/Canoe Trailer Models.
This kit includes:
2 – 7/16" x 2.06" x 4.31" Galvanized U-Bolt
4 – 1/2" SAE Galvanized Flat Washer
4 – 7/16" Galvanized Tri-Lock Nut
MODEL: CFRACKUPRIGHT-MNTKIT
Used on
Kayak/Canoe Trailer Upright Mounting Kit
This kit is used to mount uprights on all Kayak/Canoe Trailer Models.
This kit includes:
2 – 7/16" x 2.06" x 4.31" Galvanized U-Bolt
4 – 1/2" SAE Galvanized Flat Washer
4 – 7/16" Galvanized Tri-Lock Nut
MODEL: CFRACKUPRIGHT-MNTKIT
3IN Kayak/Canoe Trailer Upright Mounting Kit
$12.99
Brand Com-Fab
General
Kayak/Canoe Trailer Upright Mounting Kit
This kit is used to mount uprights on all 3IN tubing Trailer Models.
This kit includes:
2 – 3/8″ x 3.06" x 4.5″ Galvanized U-Bolt
4 – 3/8″ Galvanized USS Flat Washer
4 – 3/8″-16 Galvanized Tri-Lock Hex Nuts
Kayak/Canoe Trailer Upright Mounting Kit
This kit is used to mount uprights on all 3IN tubing Trailer Models.
This kit includes:
2 – 3/8″ x 3.06" x 4.5″ Galvanized U-Bolt
4 – 3/8″ Galvanized USS Flat Washer
4 – 3/8″-16 Galvanized Tri-Lock Hex Nuts
Crossbar Mounting Kit
$17.99
Brand Com-Fab
General
Kayak/Canoe Trailer Crossbar Mounting Kit
This kit is used to mount crossbars on all Kayak/Canoe Trailer Models.
This kit includes:
2 – 3/8”-16 x 2.06” x 2.88” Zinc U-Bolt
4 – 3/8″ Zinc Hex Flange Top Lock Nut
4 – 3/8″ Galvanized Flat Washer
1 – Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
2 – Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
Kayak/Canoe Trailer Crossbar Mounting Kit
This kit is used to mount crossbars on all Kayak/Canoe Trailer Models.
This kit includes:
2 – 3/8”-16 x 2.06” x 2.88” Zinc U-Bolt
4 – 3/8″ Zinc Hex Flange Top Lock Nut
4 – 3/8″ Galvanized Flat Washer
1 – Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
2 – Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket