Products
12′ Winch Strap w/ Spring Loaded Hook and Loop End
$20.00
Brand Com-Fab
General
12′ Winch Strap w/ Spring Loaded Hook and Loop End
Strap is generally sold as a replacement part for the Dutton-Lainson 900 lb Capacity Crank Winch (CFWNCH900DL). If you have a Com-Fab PWC trailer this is the replacement strap for your trailer's winch. The strap has the following capabilities:
- Strap working load limit: 1,700 lbs
- Break strength: 2,600 lbs
- 12' Long strap with hook
- Hand saver loop dimensions: 1" x 18"
- Steel hook tensile strength: 3,750 lbs
- Mounting bolt dimensions: 2-1/2" x 1/4" bolt
MODEL: CFWNCHSTRAP-12FT(PWC)
Used on
14″ Galvanized Winch Assembly w/ RAM 600
$114.99
Brand Com-Fab
This product is sold out
General
14″ Galvanized Winch Assembly w/ RAM 600 lb Winch
This assembly includes a 14" Galvanized Winch Post, a RAM 600 lb Capacity Crank Winch, a Winch Poly Bow Roller Assembly, and a Galvanized Winch Assembly Mounting Kit.
Mounting Hardware Includes:
4 – 3/8″-16 Galvanized Tri-Lock Hex Nuts
MODEL: CFWNCH800G
Used on
PWT-800G
14″ Galvanized Winch Post
$50.00
Brand Com-Fab
General
14″ Galvanized Winch Post
This item is used as part of 14" Galvanized Winch Assemblies for Single Galvanized PWT Trailers.
14" Galvanized Winch Assembly w/ DL900 lb Winch
14″ Galvanized Winch Assembly w/ RAM 600 lb Winch
MODEL: CFWNCHPOST-1000G
Used on
14″ Galvanized Winch Assembly w/ DL 600
$130.00
Brand Com-Fab
General
14″ Galvanized Winch Assembly w/ DL 600 lb Winch
This assembly includes a 14" Galvanized Winch Post, a Dutton-Lainson 600 lb Capacity Crank Winch, a Winch Poly Bow Roller Assembly, and a Galvanized Winch Assembly Mounting Kit. When mounted, the standard height for the bow roller is 12", but it can be adjusted to accommodate your particular boat.
Mounting Hardware Includes:
4 – 3/8″-16 Galvanized Tri-Lock Hex Nuts
MODEL: CFWNCH1000G
Used on
20′ Winch Strap w/ 1" Hook (4000 lb Max Capacity) - Dutton-Lainson
$27.50
Brand Com-Fab
General
20′ Winch Strap w/ Hook (4000 lb Max Capacity)
- Dutton-Lainson black heavy duty winch strap and hook
- For winches up to 2,600 lb. capacity
- 2" wide x 20' long
- 4,000 lb. breaking strength
- Snap Hook has a tensile strength of 7,500 lbs.
- Includes a 3/8" x 3" bolt, a 3/8" x 3-1/4" bolt, and a 3/8" locknut to install strap onto winch drum
MODEL: CFWNCHSTRAP-20FT(4K-DL)
Used on
PT-16183" Poly Bow Roller Assembly
$19.99
Brand Com-Fab
General
3" Poly Bow Roller Assembly
This is a section of the Winch Poly Bow Roller Assembly.
Materials Include:
1 – 3″ Poly Bow Roller
2 – 3″ Poly Bow Roller Bell End
1 – 1/2″-13 x 4.5″ Zinc Bolt
2 – 1/2″ Zinc Flat Washer
1 – 1/2″-13 Top Lock Nut
MODEL: CFASSM-POLYRLR(3)
Used on
3/8"-16 Zinc Hex Flange Top Lock Nut
$0.75
Brand Com-Fab
General
3/8"-16 Zinc Hex Flange Top Lock Nut Zinc
This item is part of the:
– 1000B - Bunk Mounting Kit
– 2212B - Fender Mounting Kit
– 2213B - Fender Mounting Kit
– Winch Poly Bow Roller Assembly
– Pontoon Boat Trailer Winch Assembly
MODEL: CFNUT3/8LOCKZ
Used on
ALL COM-FAB TRAILER MODELS
3/8″-16 x 1″ Zinc Hex Head Cap Bolt
$1.25
Brand Com-Fab
General
3/8″-16 x 1″ Zinc Hex Head Cap Bolt
This item is used with 3/8"-16 Serrated Zinc Flange Nuts to mount all crank winch models onto every type of winch post. It is also part of the 2213B - Bunk Mounting Kit used to mount bunks onto PWT-2213B, and PWT-2214B trailer models.
MODEL: CFBLT3/8X1Z
Used on
ALL COM-FAB TRAILER MODELS
3/8″-16 x 3.06" x 4.5″ Galvanized U-Bolt
$3.99
Brand Com-Fab
General
3/8″-16 x 3.06" x 4.5″ Galvanized U-Bolt
This item is part of these kits:
- Galvanized Winch Assembly Mounting Kit
- Jon Boat Trailer Bow Support Bunk Mounting Kit
MODEL: CFUBLT3/8X4.5G
Used on
32" Galvanized Jon Boat Trailer Winch Assembly w/ RAM 600LB Winch
$119.99
Brand Com-Fab
General
32" Galvanized Jon Boat Trailer Winch Assembly w/ RAM 600LB Winch
This assembly includes:
- RAM 600 lb Capacity Crank Winch
- Winch Poly Bow Roller Assembly
- Jon Boat Trailer Winch Assembly Mounting Kit
MODEL: CFWNCHJBTG
Used on
32″ Galvanized Winch Post
$75.00
Brand Com-Fab
General
32″ Galvanized Winch Post
- This item is part of the 32″ Galvanized Winch Assembly which is mounted to the PWT-2213G, and PWT-2214G trailer models.
- This item is part of the 32" Galvanized Jon Boat Trailer Winch Assembly which is mounted every Jon Boat Trailer model.
MODEL: CFWNCHPOST32-G
Used on
32″ Galvanized Winch Assembly w/ Dutton-Lainson 600LB Winch
$157.50
Brand Com-Fab
General
32″ Galvanized Winch Assembly w/ Dutton-Lainson 600LB Winch
This assembly includes:
- Dutton-Lainson 600 lb Capacity Crank Winch
- Winch Poly Bow Roller Assembly
- Galvanized Winch Assembly Mounting Kit
When mounted, the standard height for the bow roller is 18", but it can be adjusted to accommodate your particular boat.
MODEL: CFWNCH2213
Used on
600 lb Capacity Crank Winch with Strap and Hook Dutton-Lainson
$59.99 $54.99
Brand Com-Fab
General
Dutton-Lainson 900 lb Capacity Crank Winch
This item is a heavy duty winch used for horizontal pulling applications. It contains high carbon steel gears, permanently lubricated bearings, and a zinc tuffplate finish. A 12′ Winch Strap w/ Spring Loaded Hook and Loop End, and a Dutton-Lainson 900 lb Winch Handle. The mounting materials are sold separately.
Mounting Kit Includes:
2 - 3/8"-16 x 1" Zinc Hex Head Cap Bolt
2 - 3/8"-16 Serrated Zinc Flange Nuts
MODEL: CFWNCH900DL
Used on
DL 1400 lb Capacity Heavy Duty Winch
$79.99
Brand Com-Fab
This product is sold out
General
Dutton Lainson 1400 lb Capacity Heavy Duty Winch
This item is a Dutton Lainson Heavy Duty Winch w/ 1400 lb capacity for horizontal pulling applications and 2 speeds.
Materials Included:
– 1/2″ Zinc Nylock Nut for RAM 600/1600 Winch Handle
MODEL: CFWNCH1400DL
Used on
Dutton-Lainson 2500LB Capacity 2 Speed Crank Winch w/ Strap & Hook
$159.99
Brand Dutton Lainson
This product is sold out
Model DL2500A Winch with Heavy Duty Strap (25 ft.) Installed
Dutton-Lainson 600 lb Winch Handle
$16.99
Brand Com-Fab
General
Dutton-Lainson 600 lb Winch Handle
This ergonomic handle attaches to a Dutton-Lainson 600 lb Capacity Crank Winch with 1/2" Nylock Nut.
DUTTON-LAINSON MODEL: #70304
MODEL: CFWNCHHANDLE-DL600
Used on
Galvanized Bow Stop Bracket
$11.99
Brand Com-Fab
General
Galvanized Bow Stop Bracket
This item is part of the Winch Poly Bow Roller Assembly used on every type of winch stand for all Jon Boat, and PWT trailer models.
MODEL: CFBRKTWNCHRLR
Used on
Galvanized Pontoon Winch Assembly
$525.00
Brand Com-Fab
General
Galvanized Pontoon Winch Stand & Stair/Handrail Combo w/ D.L. 1400LB Capacity Crank Winch and Anti-slick Grip Stairs
This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340
Used on
PT-1618
PT-1820
PT-2022
PT-2224
PT-2426
Galvanized Winch Assembly Mounting Kit
$14.99
Brand Com-Fab
General
Galvanized Winch Assembly Mounting Kit
This kit contains all of the requisite materials needed to mount a Galvanized Winch Assembly onto all Galvanized PWT trailer models.
Materials Include:
2 – 3/8″ x 3.06" x 4.5″ Galvanized U-Bolt
2 – 5" x 1.25" x .25" Galvanized Flat Plate
4 – 3/8″ Galvanized USS Flat Washer
4 – 3/8″-16 Galvanized Tri-Lock Hex Nuts
MODEL: CFWNCHKITG
Used on
Heavy Duty Pontoon Trailer Winch Assembly Mounting Kit for 5"x3" Trailer Tongues
$29.99
Brand Com-Fab
General
Heavy Duty Pontoon Trailer Winch Assembly Mounting Kit for 5"x3" Trailer Tongues
This kit contains all of the requisite materials needed to mount a Pontoon Winch Assembly onto a Heavy Duty Galvanized Pontoon/Tritoon Trailer model.
Materials Include:
2 – 1/2"-13 x 3.06" x 6.31" Galvanized U-Bolts
2 – 1/2" SAE Galvanized Flat Washers
2 – 1/2"-13 Galvanized Tri-Lock Nuts
MODEL: CFWNCHKIT-(PTHD-G)
Used On
Jon Boat Trailer Winch Assembly Mounting Kit
$19.99
Brand Com-Fab
General
Jon Boat Trailer Winch Assembly Mounting Kit
This kit contains all of the requisite materials needed to mount a 32" Galvanized Winch Assembly w/DL 600 onto all Jon Boat Trailer models.
Materials Include:
2 – 3/8″ x 3.06" x 5.25″ Zinc U-Bolt
2 – 5" x 1.25" x .25" Galvanized Flat Plate
4 – 3/8″-16 Serrated Zinc Flange Nuts
MODEL: CFWNCHKIT-(JBT)
Used on
RAM 600 lb Capacity Crank Winch with Strap and Hook
$32.00
Brand Com-Fab
General
RAM 600 lb Capacity Crank Winch w/ Mounting Kit
This item is a light duty winch with permanently lubricated bearings used for horizontal pulling applications. The item has a 12′ Winch Strap w/ Spring Loaded Hook and Loop End, and a RAM 600 lb Winch Handle. The mounting materials are sold separately.
Mounting Kit Includes:
2 - 3/8"-16 x 1" Zinc Hex Head Cap Bolt
2 - 3/8"-16 Serrated Zinc Flange Nuts
MODEL: CFWNCH600TT
Used on
Winch Poly Bow Roller Assembly
$29.99
Brand Com-Fab
General
Winch Poly Bow Roller Assembly
This kit is part of every Winch Assembly used on every PWT, and Jon Boat Trailer model.
Materials Include:
1 – Galvanized Bow Stop Bracket
1 – 3/8″-16 x 3.75″ Zinc Hex Head Cap Bolt
1 – 3/8″-16 Zinc Hex Flange Top Lock Nut
1 – 1/2″-13 x 4.5″ Zinc Hex Head Cap Bolt
2 – 3″ Amber Poly Bow Roller Bell End
MODEL: CFASSM-WNCHRLR(3)
Used on
Zinc U-Bolt Winch Assembly Mounting Kit for Black Powder Coated Trailers
$13.50
Brand Com-Fab
General
Zinc U Bolt Winch Assembly Mounting Kit for Black Powder Coated Trailers
This kit has all of the requisite materials needed to mount a Black Powder Coated Winch Assembly onto any Black Powder Coated PWT trailer model.
Materials Include:
2 – 3/8″-16 x 3" x 4.5″ Zinc U-Bolt
2 – 5" x 1.25" x .25" Zinc Flat Plate
4 – 3/8″-16 Zinc Plated Serrated Flange Nuts
MODEL: CFWNCHKIT-(PWC-Z)