Products
3.75" x 1.25" x .25" Zinc Steel Shackle Link w/ 9/16" Holes - Replacement Standard Shackle Link
$3.99
Brand Com-Fab
General
3.75" x 1.25" x .25" Zinc Steel Shackle Link w/ 9/16" Holes - Replacement Standard Shackle Link
These are used to mount 2900 lb Idler Trailer Axles, or 3500 lb Hydraulic Disc Brake Trailer Axles to frames on all Single and Tandem Axle setups for Pontoon Boat trailers, and are frequently used in conjunction with axle equalizers.
Pontoon Boat Trailer Single Axle Mounting Kit
Pontoon Boat Trailer Tandem Axle Mounting Kit
TIE DOWN MODEL: #44536
MODEL: CFAXLELINK(Z)
Used on
3/16" S-Hook with Latch Trailer Safety Chain - 48"
$12.99 $10.00
Brand Com-Fab
General
3/16" S-Hook with Latch Trailer Safety Chain - 48"
48" 2000 LB safety chain with 3/16 in S-Hooks and latch
MODEL: CFSFTYCHN
Used On
3/8" Black Cable Clamp for Brake Lines
$0.99
Brand Com-Fab
General
3/8" Black Cable Clamp for Brake Lines
This item is secured onto the axle w/ use of a 12 x 3/4″ Zinc Hex Washer Head Tek#3 Screw. The item is used for securing all brake lines to axles on Pontoon Boat Trailer models w/ Brakes.
MODEL: CFBRKECBLCLAMP
Used on
3/8"-16 Thread Stainless Steel Nylock Hex Nuts
$0.50
Brand Com-Fab Trailers
3/8"-16 Thread Stainless Steel Nylock Hex Nuts
MODEL: CFNUT3/8NYLOCK-SS
3/8"-16 x 1.56" x 3.63" Galvanized U-Bolt - For Standard 1.5" SQ Tubing Axles
$5.99
Brand Com-Fab
General
3/8"-16 x 1.56" x 3.63" Galvanized U-Bolt - For Standard 1.5" SQ Tubing Axles
This item is part of the Galvanized Tie Plate Kit used to mount 3-Leaf Slipper Springs to Galvanized 1.5" Square Axle Tubing.
TIE DOWN MODEL: #83002G
MODEL: CFAXLE-UBLT(1.5SQ-G)
Used on
3/8"-16 x 1.56" x 3.63" Zinc U-Bolt - For Standard 1.5" SQ Tubing Axles
$4.99
Brand Com-Fab
General
3/8"-16 x 1.56" x 3.63" Zinc U-Bolt - For Standard 1.5" SQ Tubing Axles
This item is part of the Zinc Axle Tie Plate Kit used to mount 2-Leaf Slipper Springs (550 lb), and 3-Leaf Slipper Springs (750 lb) to 1.5" Square Axle Tubing.
TIE DOWN MODEL: #83002Z
MODEL: CFAXLE-UBLT(1.5SQ-Z)
Used on
3/8"-16 x 2.06" x 2.88" Galvanized U-Bolt
$5.99
Brand Com-Fab
General
3/8"-16 x 2.06" x 2.88" Galvanized U-Bolt
This item is part of the 1000G Bunk Mounting Kit used to mount bunks to PWT-800G, PWT-1000G, AND PWT-1100G trailer models.
MODEL: CFUBLT3/8X2.88G
Used on
3/8"-16 Zinc Hex Flange Top Lock Nut
$0.75
Brand Com-Fab
General
3/8"-16 Zinc Hex Flange Top Lock Nut Zinc
This item is part of the:
– 1000B - Bunk Mounting Kit
– 2212B - Fender Mounting Kit
– 2213B - Fender Mounting Kit
– Winch Poly Bow Roller Assembly
– Pontoon Boat Trailer Winch Assembly
MODEL: CFNUT3/8LOCKZ
Used on
ALL COM-FAB TRAILER MODELS
3/8”-16 x 2.06” x 2.88” Zinc U-Bolt
$5.99
Brand Com-Fab
General
3/8”-16 x 2.06” x 2.88” Zinc U-Bolt
This item is part of the 1000B - Bunk Mounting Kit used to mount bunks onto PWT-800B, PWT-1000B, AND PWT-1100B trailer models.
MODEL: CFUBLT3/8X2.88Z
Used on
3/8″-16 x 1″ Zinc Hex Head Cap Bolt
$1.25
Brand Com-Fab
General
3/8″-16 x 1″ Zinc Hex Head Cap Bolt
This item is used with 3/8"-16 Serrated Zinc Flange Nuts to mount all crank winch models onto every type of winch post. It is also part of the 2213B - Bunk Mounting Kit used to mount bunks onto PWT-2213B, and PWT-2214B trailer models.
MODEL: CFBLT3/8X1Z
Used on
ALL COM-FAB TRAILER MODELS
3/8″-16 x 2.06″ x 5.25″ Zinc U-Bolt
$5.99
Brand Com-Fab
General
3/8″-16 x 2.06″ x 5.25″ Zinc U-Bolt
This item is used with a 4" x 1" x .25" Galvanized Flat Plates w/ 1/2" Holes, and a 3/8"-16 Serrated Zinc Flange Nuts to mount Pontoon Boat Trailer Bunk Brackets onto all Pontoon Boat Trailer models.
See: Tall Galvanized Pontoon Boat Trailer Bunk Bracket Kit
MODEL: CFUBLT3/8X2.06X5.25Z
Used on
3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt
$5.99
Brand Com-Fab
General
3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt
This item is a part of these kits:
- Jon Boat Trailer Bunk Mounting Kit
- Jon Boat Trailer Fender Mounting Kit
- 'River Hawk' Jon Boat Trailer Bunk Mounting Kit
TIE DOWN MODEL: #83027G
MODEL: CFUBLT3/8X2.38G
Used on
3/8″-16 x 3.06" x 2.38″ Zinc U-Bolt
$5.99
Brand Com-Fab
General
3/8″-16 x 3.06" x 2.38″ Zinc U-Bolt
This item is part of these kits:
TIEDOWN: 83027Z
MODEL: CFUBLT3/8X2.38Z
Used on
3/8″-16 x 3.06" x 4.5″ Galvanized U-Bolt
$3.99
Brand Com-Fab
General
3/8″-16 x 3.06" x 4.5″ Galvanized U-Bolt
This item is part of these kits:
- Galvanized Winch Assembly Mounting Kit
- Jon Boat Trailer Bow Support Bunk Mounting Kit
MODEL: CFUBLT3/8X4.5G
Used on
3/8″-16 x 4.19″ x 3″ Galvanized U-Bolt
$5.99
Brand Com-Fab
General
3/8″-16 x 4.19″ x 3″ Galvanized U-Bolt
This item is part of the 2213G - Fender Mounting Kit used to mount fenders to PWT-2213G, PWT-2214G, and all Pontoon Boat Trailer models.
MODEL: CFUBLT3/8X3.00G
Used on
3/8″-16 x 4.19″ x 3″ Zinc U-Bolt
$4.99
Brand Com-Fab
General
3/8″-16 x 4.19″ x 3″ Zinc U-Bolt
This item is part of the 2213B - Fender Mounting Kit used to mount fenders to PWT-2213B, and PWT-2214B trailer models.
MODEL: CFUBLT3/8X3.00Z
Used on
32" Galvanized Jon Boat Trailer Winch Assembly w/ RAM 600LB Winch
$119.99
Brand Com-Fab
General
32" Galvanized Jon Boat Trailer Winch Assembly w/ RAM 600LB Winch
This assembly includes:
- RAM 600 lb Capacity Crank Winch
- Winch Poly Bow Roller Assembly
- Jon Boat Trailer Winch Assembly Mounting Kit
MODEL: CFWNCHJBTG
Used on
32" Powder Coat Black Winch Post
$69.99
Brand Com-Fab Trailers
This product is sold out
General
32" Powder Coat Solar Flat Matte Black Winch Post
This item is part of the 32" Powder Coat Solar Flat Matte Black Winch Post that mounts to the PWT-2214B trailer models with Zinc U Bolt Winch Assembly for Black Powder Coated Trailers.
MODEL: CFWNCHPOST(PWC-32)-B (SOLAR)
Used on
32" Powder Coated Matte Black Winch Assembly w/ 600LB DL Winch
$149.99
Brand Com-Fab Trailers
General
32IN Powder Coat Solar Flat Matte Black Winch Assembly w/ 600LB DL Winch
Materials Include
1 - 32" Powder Coat Solar Flat Matte Black Winch Post
1 - 600 lb Capacity Dutton-Lainson Crank Winch w/ Handle
1 - Winch Poly Bow Roller Assembly
1 - Black Powder Coated Winch Assembly Mounting Kit
When mounted, the standard height for the bow roller is 18", but it can be adjusted to accommodate your particular boat.
MODEL: CFWNCHASSM-2214B (SOLAR)
Used on
32″ Galvanized Winch Post
$75.00
Brand Com-Fab
General
32″ Galvanized Winch Post
- This item is part of the 32″ Galvanized Winch Assembly which is mounted to the PWT-2213G, and PWT-2214G trailer models.
- This item is part of the 32" Galvanized Jon Boat Trailer Winch Assembly which is mounted every Jon Boat Trailer model.
MODEL: CFWNCHPOST32-G
Used on
32″ Galvanized Winch Assembly w/ Dutton-Lainson 600LB Winch
$157.50
Brand Com-Fab
General
32″ Galvanized Winch Assembly w/ Dutton-Lainson 600LB Winch
This assembly includes:
- Dutton-Lainson 600 lb Capacity Crank Winch
- Winch Poly Bow Roller Assembly
- Galvanized Winch Assembly Mounting Kit
When mounted, the standard height for the bow roller is 18", but it can be adjusted to accommodate your particular boat.
MODEL: CFWNCH2213
Used on
35' 4-Pin Wire Harness Assembled w/ Protective Sleeve
$29.75
Brand Com-Fab
General
35' 4-Pin Wire Harness Assembled w/ Protective Sleeve
The wiring is pulled through the trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Pin Male Connector. This item comes with a 3/8 20" Protective Sleeve and 30" Ground with 1/2" Ring Terminal.
MODEL: CFWH35
Used on
3IN Kayak/Canoe Trailer Upright Mounting Kit
$12.99
Brand Com-Fab
General
Kayak/Canoe Trailer Upright Mounting Kit
This kit is used to mount uprights on all 3IN tubing Trailer Models.
This kit includes:
2 – 3/8″ x 3.06" x 4.5″ Galvanized U-Bolt
4 – 3/8″ Galvanized USS Flat Washer
4 – 3/8″-16 Galvanized Tri-Lock Hex Nuts
4 Capacity Canoe/Kayak Conversion Kit
$529.99
Brand Com-Fab
General
4 Capacity Canoe/Kayak Conversion Kit
Universal canoe/kayak trailer conversion kit for up to 4 kayaks or 4 canoes without plastic protective covering.
One size fits all trailer kit:
- Designed to hold 4 regular sized kayaks or canoes
- Fits on 1.5", 2", 3" rectangular and/or square tubing where applicable.
- 2x2x11 gauge upright bracing for universal fit.
- 2x2x14 gauge cross braces with stability slides, preventing side-to-side movement. (Optional)
This is a conversion kit only and requires a separate trailer to mount.
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
Specifications
4 Capacity Normal Kayak Kit - CFKIT-KAY(4S)
- 2x 30" Uprights
- 4x 60" Crossbeams with Strap Assist and End Caps
- 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
4 Capacity Tall Kayak Kit - CFKIT-KAY(4T)
- 2x 40" Uprights
- 4x 60" Crossbeams with Strap Assist and End Caps
- 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
4 Capacity Normal Canoe Kit - CFKIT-CAN(4S)
- 2x 40" Uprights
- 4x 80" Crossbeams with Strap Assist and End Caps
- 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
4 Capacity Tall Canoe Kit - CFKIT-CAN(4T)
- 2x 48" Uprights
- 4x 80" Crossbeams with Strap Assist and End Caps
- 2x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
* The tubing size of the trailer will determine which U Bolts will be needed to secure the uprights to the frame
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf