Products
2213/4B - Black Powder Coated Fender for 13" Tire/Wheels
$79.99
Brand Com-Fab
General
2213/4B - Black Powder Coated Fender for 13" Tire/Wheels
This fender is mounted onto a PWT-2213B, or a PWT-2214B trailer model with a 2213B - Fender Mounting Kit, and fits an ST175/80D13 C Load Range, 13″ Silver E-Coat Tire & Wheel.
MODEL: CFFNDR2213/4B
Used on
2213/4B - Bunk Mounting Kit
$29.99
Brand Com-Fab
General
2213/4B - Bunk Mounting Kit
These are all of the requisite materials needed to mount a 2" x 4" x 6' Black Marine Carpeted Bunk Board onto a 2213B trailer model. This kit can also be used to mount a 2" x 4" x 7' Black Marine Carpeted Bunk Board onto a 2214B trailer model.
Materials Include:
2 – 8.25" x 1.5" x .25" Zinc Flat Plate
2 – 3/8″-16 x 1" Zinc Hex Head Bolt
2 – Galvanized Angular Swivel Bracket
6 – 3/8″ Zinc Hex Flange Top Lock Nut
4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw
MODEL: CFBNKKIT-2213B
Used on
2213/4B - Fender Mounting Kit
$19.99
Brand Com-Fab
General
2213/4B - Fender Mounting Kit
These are all of the requisite materials needed to mount a Black Powder Coated Fender 13″ Tire onto the PWT2213B, and PWT2214B trailer models.
Materials Include:
4 – 3/8″ Zinc Hex Flange Top Lock Nut
MODEL: CFFNDRKIT-2213B
Used on
2213/4G - Bunk Mounting Kit
$29.99
Brand Com-Fab
General
2213/4G - Bunk Mounting Kit
These are all of the requisite materials needed to mount a 2″ x 4″ x 6′ Black Marine Carpeted Bunk Board onto a 2213G trailer model. The kit can also be used to mount a 2″ x 4″ x 7′ Black Marine Carpeted Bunk Board onto a 2214G trailer model.
Materials Include:
2 – 8.25" x 1.5"x .25" Galvanized Flat Plate
2 – 3/8"-16 x 1" Galvanized Hex Head Cap Bolt
2 – Galvanized Angular Swivel Bracket
4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw
MODEL: CFBNKKIT-2213G
Used on
2213/4G - Fender Mounting Kit
$19.99
Brand Com-Fab
General
2213/4G - Fender Mounting Kit
This kit contains all of the requisite materials needed to mount a Galvanized Fender 13" Tire onto 2213G, 2214G, and Pre-2019 Single Axle Pontoon Boat Trailer models.
Materials Include:
2 – 3/8″-16 x 4.19″ x 3″ Galvanized U-Bolt
2 – 6" x 1.5" x 1.25" Galvanized Flat Plate
4 – 3/8″ Galvanized Tri-Lock Hex Nuts
MODEL: CFFNDRKITG-2213
Used on
2213/4G - Galvanized Fender
$79.99
Brand Com-Fab
General
2213/4G - Galvanized Fender
This fender is mounted to a PWT-2213G, or PWT-2214G trailer model using a 2213G - Fender Mounting Kit, and fits an ST175/80D13 C Load Range 13″ Galvanized Tire & Wheel.
MODEL: CFFNDR2213
Used on
23.5″ Pontoon Boat Trailer Guide Post Assembly Kit
$49.99
Brand Com-Fab
General
23.5″ Pontoon Boat Trailer Guide Post Assembly
This assembly includes:
1 - 23.5″ Pontoon Guide Post, w/ 2″ x 4″ x 1′ carpeted wood bumpers
2 - 7/16" x 2.06" x 4.31" Galvanized U-Bolt
4 - 3/8″ Galvanized Flat Washer
4 - 7/16" Galvanized Tri-Lock Nut
MODEL: CFPOST-GUIDE(ASSM)
Used on
240″ Grey Poly Flex Male-Banjo Brake Line - Dexter
$64.99 $40.00
Brand Com-Fab
General
240″ Grey Poly Flex Male-Banjo Brake Line - Dexter
This item is used for brake lines on PT-2224 models only.
For use with:
– Banjo Fitting Base
– Square Banjo Fitting Bolt
– Black O-Ring
– Copper Banjo Fitting Washer
TIE DOWN MODEL: #46219-240
MODEL: CFBRKELINE- 240(GREY)
Used on
PT-2224
2500 lb Black Powder Coated PWC Trailer Axle w/ 545 Hubs and Springs HF 93.5 SC 83.5
$355.00
Brand Com-Fab
General
2500 lb Black Powder Coated PWC Trailer Axle w/ 545 Hubs and Springs
*This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340*
*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*
Materials Include:
1 - 83" x 2" x 2" x 3/16" Gauge Black Powder Coated Axle Tubing
2 - Black Powder Coated 5-Bolt Hub Assembly
2 - 5-Leaf Slipper Springs (1,250 lb)
1 - BATIE190Z Zinc Tie Plate Kit
This item is mounted to the PWT-2213B, and PWT-2214B trailer models with a Black Powder Coated Axle Mounting Kit.
MODEL: CFAXLE2500B
Specifications
Tubing: 2" Black Powder Coated Square Axle
Load Rating: 2500 lb
Hub Face: 93.5"
Spring Center: 83"
Overall Length: 98.5"
Bearing Size: 1-1/16"
Used on
2500 lb Galvanized PWC Trailer Axle w/ 545 Hubs and Springs HF 93.5 SC 83.5
$400.00
Brand Com-Fab
General
2500 lb Galvanized PWC Trailer Axle w/ 545 Hubs and Springs
*This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340*
*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*
Materials Include:
1 - 83" x 2" x 2" x 3/16" Gauge Galvanized Axle Tubing
2 - Galvanized 5-Bolt Hub Assembly
2 - 5-Leaf Slipper Springs (1,250 lb)
This item is mounted to the PWT-2213G, and PWT-2214G trailer models with a Galvanized Axle Mounting Kit.
MODEL: CFAXLE2500G
Specifications
Tubing: 2" Galvanized Square Axle
Load Rating: 2500 lb
Hub Face: 93.5"
Spring Center: 83"
Overall Length: 98.5
Bearing Size: 1-1/16"
Used on
264″ Grey Poly Flex Hose Male-Banjo Brake Line - Dexter
$69.99
Brand Com-Fab
General
264″ Grey Poly Flex Hose Male-Banjo Brake Line - Dexter
This item is used as a brake line on PT-2426 models only.
For use with:
– Banjo Fitting Base
– Square Banjo Fitting Bolt
– Black O-Ring
– Copper Banjo Fitting Washer
TIE DOWN MODEL: #46223-264
MODEL: CFBRKELINE-264B(GREY)
Used on
PT-2426
264″ Grey Poly Flex Hose Male-Male Brake Line - Dexter
$45.00
Brand Com-Fab
General
264″ Grey Poly Flex Hose Male-Male Brake Line - Dexter
This item is used as a brake line on PT-2426 models only.
For use with:
– Banjo Fitting Base
– Square Banjo Fitting Bolt
– Black O-Ring
– Copper Banjo Fitting Washer
TIE DOWN MODEL: #46219-264
MODEL: CFBRKELINE- 264(GREY)
Used on
PT-2426
288″ Black Flex Hose Male-Banjo Brake Line - Dexter
$74.99
Brand Com-Fab
General
288″ Black Flex Hose Male-Banjo Brake Line - Dexter
This item is used for brake lines on select PT-2426 models only.
For use with:
– Banjo Fitting Base
– Square Banjo Fitting Bolt
– Black O-Ring
– Copper Banjo Fitting Washer
TIE DOWN MODEL: #46238-288
MODEL: CFBRKELINE-288(BLK)
Used on
PT-2426
2900 lb Galvanized PWC Idler Trailer Axle w/ 545 Hubs and Springs HF 87 SC 74
$425.00
Brand Com-Fab
General
2900 lb Galvanized Idler Trailer Axle w/ 545 Hubs and Springs
*This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340*
*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*
Materials Include:
1 - 80.375" x 2" x 2" x .17" Gauge Galvanized Axle Tubing
2 - Galvanized 5-Bolt Hub Assembly
2 - 3-Leaf Double Eye Springs (1850 lb)
1 - 7000# Galvanized Tie Plate Kit
- This item is used on all Tandem, and Single Axle Non-Brake Setup Pontoon Boat Trailers.
- It can be mounted to a Single Axle Pontoon Boat Trailer Fender with a Pontoon Boat Trailer Single Axle Mounting Kit.
- Two of them can be mounted to Tandem Axle Pontoon Boat Trailer Fenders with a Pontoon Boat Trailer Tandem Axle Mounting Kit
**Some states require brakes on all axles and/or wheels. please refer to local laws when placing your order. it is up to the individual dealer to stay within the guidelines as set by the legal authorities.
MODEL: CFAXLE2900G(IDLER)
Specifications
Tubing: 2" Galvanized Square Axle
Load Rating: 2900 lb
Hub Face: 87"
Spring Center: 74"
Overall Length: 92"
Bearing Size: 1-3/8" x 1-1/16"
Optional for
2IN Kayak/Canoe Trailer Upright Mounting Kit
$12.99
Brand Com-Fab
General
Kayak/Canoe Trailer Upright Mounting Kit
This kit is used to mount uprights on all Kayak/Canoe Trailer Models.
This kit includes:
2 – 7/16" x 2.06" x 4.31" Galvanized U-Bolt
4 – 1/2" SAE Galvanized Flat Washer
4 – 7/16" Galvanized Tri-Lock Nut
MODEL: CFRACKUPRIGHT-MNTKIT
Used on
2IN x 4IN Wide Black Plastic Bunk Covering
$3.40
Brand Com-Fab
General
Black Marine Plastic 2IN X 4IN Wide
$3.40/ft
- This plastic is used for bunks on all of our Pontoon Trailer models. It is optional for our Canoe/Kayak Angler Kits, PWC Trailer, and Jon Boat Trailer models.
If you are purchasing this Plastic it needs to be a foot longer than the board itself.
MODEL: CFBNKCOVER-PLASTIC(4IN-CA)
Used on
Optional for
PWT-2214G
JBT-900
JBT-1400
JBT-1600
JBT-1600 ‘RIVER HAWK
2″ Steel Super Lube Grease Dust Cap & Plug Set (2x)
$9.99
Brand Com-Fab
General
2″ Steel Super Lube Grease Dust Cap & Plug for Axle Hub
This item is a part of all hub assemblies and comes as a pair.
Galvanized 5-Bolt Hub Assembly
Powder Coated Black 5-Bolt Hub Assembly
TIE DOWN MODEL: #17093
MODEL: CFAXLE-CAP&PLUG
Used on
ALL COM-FAB TRAILER MODELS
2″ x 4″ x 7′ Black Marine Carpeted Bunk Board
$35.00
Brand Com-Fab
General
2″ x 4″ x 7′ Black Marine Carpeted Bunk Board
These are used for all PWT-1100, and PWT-2214 trailer models.
MODEL: CFBUNKBRDC-7FT
Used on
2″ x 4″ x 8′ Black Marine Carpeted Bunk Board
$40.00
Brand Com-Fab
General
2″ x 4″ x 8′ Black Marine Carpeted Bunk Board
These are used for our KCT angler kits
Used along with our Angler Kayak Trailer Bunk Mounting Kit
MODEL: CFBUNKBRDC-8FT
2″ x 8″ x 10′ Black Marine Carpeted Center Walk Board
$79.99
Brand Com-Fab
2″ x 8″ x 10′ Black Marine Carpeted Center Walk Board
This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340
This item is used for all PWT-2213 trailer models. It is mounted to the center of the trailer frame with six 5/8″-16 x 1-1/2″ Galvanized Hex Head Lag Screws.
MODEL: CFWALKBRDC-10FT
Used on
3 Capacity Canoe/Kayak Conversion Kit
$409.99
Brand Com-Fab
General
3 Capacity Canoe/Kayak Conversion Kit
Canoe/kayak trailer conversion kit for up to 3 kayaks or 3 canoes without plastic protective covering.
- Designed to hold 3 kayaks/canoes
- Fits on 1.5", 2", 3" rectangular and/or square tubing where applicable.
- 2x2x11 gauge upright bracing for universal fit.
- 2x2x14 gauge cross braces
This is a conversion kit only and requires a separate trailer to mount.
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
Specifications
Kayak Setup - CFKIT-KAY(3)
- 2x 30" Uprights
- 2x 48" Crossbeams with Strap Assist and End Caps
- 2x 60" Crossbeams with Strap Assist and End Caps
- 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
Canoe Setup - CFKIT-CAN(3)
- 2x 30" Uprights
- 2x 48" Crossbeams with Strap Assist and End Caps
- 2x 80" Crossbeams with Strap Assist and End Caps
- 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
3" Poly Bow Roller Assembly
$19.99
Brand Com-Fab
General
3" Poly Bow Roller Assembly
This is a section of the Winch Poly Bow Roller Assembly.
Materials Include:
1 – 3″ Poly Bow Roller
2 – 3″ Poly Bow Roller Bell End
1 – 1/2″-13 x 4.5″ Zinc Bolt
2 – 1/2″ Zinc Flat Washer
1 – 1/2″-13 Top Lock Nut
MODEL: CFASSM-POLYRLR(3)
Used on
3-Leaf Double Eye Springs 1850 lb Capacity (Qty 2)
$109.99
Brand Com-Fab
General
3-Leaf Double Eye Springs 1850 lb Maximum Capacity (Qty 2)
These are mounted to the 2900 lb Idler Trailer Axle, or the 3500 lb Hydraulic Disc Brake Trailer Axle using a 7000# Galvanized Tie Plate Kit. These are used on all of our Single, and Tandem Axle Pontoon Boat Trailer models.
TIE DOWN MODEL: #13093
MODEL: CFAXLE3-LSPNG(DE)
Specifications
Length: 20.00"
Leaf Width: 1.75"
Arch Height: 3.00"
Bushing Type: Nylon
Used on
3-Leaf Slipper Flat Springs 750 lb Capacity (Qty 2)
$89.99
Brand Com-Fab
General
3-Leaf Slipper Springs 750 lb Maximum Capacity (Qty 2)
- This item is mounted to the 1500 lb Galvanized Trailer Axle, as well as the 1500 lb Extended Galvanized Trailer Axle with a Galvanized Tie Plate Kit.
- This item is mounted to the 1500 lb Black Powder Coated Trailer Axle with a Zinc Tie Plate Kit.
TIE DOWN MODEL: #13087
MODEL: CFAXLE-LSPRNG(3-SF)
Specifications
Length: 24.63"
Leaf Width: 1.75"
Arch Height: 4.50"
Bushing Type: Nylon