Products

General

2213/4B - Black Powder Coated Fender for 13" Tire/Wheels

This fender is mounted onto a PWT-2213B, or a PWT-2214B trailer model with a 2213B - Fender Mounting Kit, and fits an ST175/80D13 C Load Range, 13″ Silver E-Coat Tire & Wheel.

MODEL: CFFNDR2213/4B

Used on

General

2212B - Black Powder Coated Fender with Front & Rear Sidemarker Lights

This fender is mounted onto a PWT-2212B trailer with a 2212B - Fender Mounting Kit, and fits a 4.80 x 12″ B Load Range Silver Tire & Wheel. It has been updated for 2020 to accommodate side lighting.

MODEL:CFFNDR2212B

Used on

PWT-2212B

General

2212B - Black Powder Coated Fender

This fender is mounted onto a Pre-2020 PWT-2212B trailer with a 2212B - Fender Mounting Kit, and fits a 4.80 x 12″ B Load Range Silver Tire & Wheel.

MODEL: CFFNDR2212B

Used on

PWT-2212B

General

Smooth Gloss Bengal Black Touch Up Pen

This item is used to touch up all of our Black Powder Coated Trailers, Fenders, and Winch Assemblies for sale. It is specifically designed for our trailers, and is an exact match finish. The instructions for use are clearly labeled on the back of the pen.

Specifications

Net Weight: 3.5 oz/9 ml

Exact Match Finish - Industrial. Product Contains less than 88% VOC/2.05 MIR

Contains: Acetone, Xylene, Toluene, and Petroleum Distillates.

DANGER! EXTREMELY FLAMMABLE LIQUID AND VAPOR.

VAPORS MAY CAUSE FLASH FIRE.

VAPOR HARMFUL. MAY AFFECT THE BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA. CAUSES EYE, SKIN, AND NOSE IRRITATION. 

NOTICE: Reports have associated repeated, and prolonged occupational overexposure to solvents with permanent brain, and nervous system damage. Intentional misuse by deliberately concentrating, and inhaling the contents may be harmful or fatal. WARNING! This product contains a chemical known to the state to California to cause cancer and birth defects or other reproductive harm. Do not puncture or incinerate (burn) container. Exposure to heat or prolonged exposure to sun may cause bursting. Do not expose to heat or store at temperatures above 120 Degrees Fahrenheit. Vapors may ignite explosively. Keep away from heat, sparks, and flame. Do not smoke. Extinguish all flames and pilot lights and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent buildup of vapors by opening all windows and doors to achieve cross-ventilation. Use only with adequate ventilation. Do not breathe dust, vapors, or spray mist. To avoid breathing vapors or spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air or wear respiratory protection (NIOSH/MSHA approved) or leave the area. Close container after each use. Avoid contact with eyes, skin, and clothing. First Aid: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention; for skin, wash thoroughly with soap and water.

Instructions

PREPARATION: Surface should be clean, dry, and free of wax, oil, rust, loose paint, etc. WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

DIRECTIONS: Shake well to get best color match. 

KEEP OUT OF THE REACH OF CHILDREN.