Products
15' 4-Pin Wire Harness Assembled w/ Protective Sleeve
$12.75
Brand Com-Fab
General
15' 4-Pin Wire Harness Assembled w/ Protective Sleeve
The wiring is pulled through the PWT-800 trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Pin Male Connector. This item comes with a 3/8 20" Protective Sleeve and 30" Ground with 1/2" ring terminal.
MODEL: CFWH14
Used on
17' 4-Pin Wire Harness Assembled w/ Protective Sleeve
$14.50
Brand Com-Fab
General
17' 4-Pin Wire Harness Assembled w/ Protective Sleeve
The wiring is pulled through the trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Pin Male Connector. This item comes with a 3/8 20" Protective Sleeve and 30" Ground with 1/2" ring terminal.
MODEL: CFWH16
Used on
21' 4-Pin Wire Harness Assembled w/ Protective Sleeve
$18.00
Brand Com-Fab
General
21' 4-Pin Wire Harness Assembled w/ Protective Sleeve
The wiring is pulled through the trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Pin Male Connector. This item comes with a 3/8 20" Protective Sleeve and 30" Ground with 1/2" ring terminal.
MODEL: CFWH21
Used on
JBT-1600 ‘RIVER HAWK’
35' 4-Pin Wire Harness Assembled w/ Protective Sleeve
$29.75
Brand Com-Fab
General
35' 4-Pin Wire Harness Assembled w/ Protective Sleeve
The wiring is pulled through the trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Pin Male Connector. This item comes with a 3/8 20" Protective Sleeve and 30" Ground with 1/2" Ring Terminal.
MODEL: CFWH35
Used on
Dry Launch 60″ Red Triple Light Bar
$11.25
Brand Com-Fab
General
Dry Launch 60″ Red Triple Light Bar
This light bar can be mounted to all Double PWT, and Pontoon Boat Trailer models. It is secured with two 12 x 3/4″ Zinc Hex Washer Head Tek #3 Screws.
MODEL: CFLIGHTBAR-60
Optional for
Dry Launch Amber Side Marker Light w/ 10" of Wire
$9.99
Brand Com-Fab
General
Dry Launch Amber Side Marker Light w/ 10" of Wire
This item is a Dry Launch 203 Series with a snap out bulb slide. You can change the bulb without tools, and mount it with a single stud. It can be used as a Side Marker Light for the tongue of all Pontoon Boat Trailer models.
MODEL: CFLIGHTSDMRKR-10
Optional for
Dry Launch SP7 Red Tail Light (Driver Side) - Incandescent
$20.00
Brand Com-Fab
General
Dry Launch SP7 Red Tail Light (Driver Side) - Incandescent
The Dry Launch submersible 8-function driver side tail light is waterproof with a bulb slide that has a built-in dust and splash guard. It snaps out for easy bulb replacement.
Dimensions: W = 6" H = 3.5" D = 2-1/4"
Materials Include:
MODEL: CFLIGHTREAR(L)-INC(DL)
Optional for
ALL COM-FAB TRAILER MODELS
Dry Launch SP7 Red Tail Light (Passenger Side) - Incandescent
$20.00
Brand Com-Fab
General
Dry Launch SP7 Red Tail Light (Passenger Side) - Incandescent
The Dry Launch submersible 7-function passenger side tail light is waterproof with a bulb slide that has built-in dust, and splash guard. It snaps out for easy bulb replacement.
Dimensions: W = 6" H = 3.5" D = 2-1/4"
Materials Include:
2 - 1/4"-18 Zinc Nut
MODEL: CFLIGHTREAR(R)-INC(DL)
Optional for
ALL COM-FAB TRAILER MODELS
Jammy J-51-A 3/4" Single Diode PC Side Marker Light
$4.99
Brand Com-Fab
General
Jammy J-51-A 3/4" Single Diode PC Side Marker Light
The Jammy diode side marker light is a 3/4″ Round Single Diode, Amber-Colored LED Marker Light (PC Rated) that mounts in 3/4″ diameter holes. This model includes a mounting grommet, and 6″ leads with blunt cut ends.
MODEL: CFLIGHTSDMRKR-LED(J-51-A)
TecNiq Red LED V-Shaped Light Bar w/ 58" Lead
$19.99 $11.25
Brand Com-Fab
General
TecNiq Red LED V-Shaped Light Bar w/ 58" Lead
- Used on all Double PWT Trailer models.
- Screws included with purchase
- Fully submersible LED Identification bar
- TecSeal Urethane Potting - Guaranteed Circuit Board Protection
- Durable impact resistant lens
- Available in colored or clear impact resistant lens
- IP68 rating while exceeding FMVSS 108 standards
- Reliable performance over 100,000 hours
MODEL: CFLIGHTBAR-LED(V-TEC)
Used On
TecNiq Red Low Profile ID Light Bar w/ Ground Terminal
$19.99 $10.50
Brand Com-Fab
General
Red Low Profile ID Light Bar w/ Ground Terminal
- Used on all Pontoon Trailer models
- Screws included with purchase
- Meets all FMVSS 108 requirements for wide and narrow vehicles
- IP68 Rated - Dust and water proof with hermetic seal
- TecSeal Urethane Potting - Guaranteed Circuit Board Protection
- Durable impact resistant lens
- Excellent UV Resistance - Automotive exterior lighting grade polycarbonate
- Reliable performance over 100,000 hours
- Can be mounted horizontal, vertical, or at any angle
TecNiq Model No. T10-RR00-1
MODEL: CFLIGHTBAR-LED(S-TEC)
Used On
TecNiq-S14 Amber LED Mini PC Side Marker Light with 24" Lead
$7.99 $5.00
Brand Com-Fab
General
TecNiq-S14 Amber LED Mini PC Side Marker Light with 24" Lead
- Comes with a 1/4" Nut.
- Brilliant illumination in a compact size
- IP 68 Rated - Dust and water proof
- TecSeal Urethane Potting - Guaranteed Circuit Board Protection
- Stud-mounted, no visible fasteners
- Reliable performance over 100,000 hours
- Vertical mount positions meets P2 specifications, while horizontal mount meets PC specifications
Tecniq Part No. S14-AAS0-1
MODEL: CFLIGHTSDMRKR-LED(TEC-A24)
Used on
TecNiq-S14 Red LED Mini PC Side Marker Light with 24" Lead
$7.99 $5.00
Brand Com-Fab
General
TecNiq-R24 Red LED Mini PC Side Marker Light with 24" Lead
- Comes with a 1/4" Nut.
- Brilliant illumination in a compact size
- IP 68 Rated - Dust and water proof
- TecSeal Urethane Potting - Guaranteed Circuit Board Protection
- Stud-mounted, no visible fasteners
- Reliable performance over 100,000 hours
- Vertical mount positions meets P2 specifications, while horizontal mount meets PC specifications
TecNiq Part No. S14-RRS1-1
MODEL: CFLIGHTSDMRKR-LED(TEC-R24)
Used on
TecNiq-T86 7 Function 6" LED Tail Light (Passenger Side)
$34.99 $24.00
Brand Com-Fab
General
TecNiq-T86 7 Function 6" Box LED Passenger Side Tail Light w/ Pigtail
- These are optional for all Trailer Models.
- Multi-Function 6" Box Tail Light
- Urethane Potting w/ Guaranteed Circuit Board Protection
- Dust and water proof with hermetic seal
- Durable impact resistant lens
- Meets all FMVSS 108 requirements for narrow and wide vehicles
- Reliable performance over 100,000 hours
- Fits standard mounting as a direct replacement
- Functions include: Stop, Turn, Tail, Clearance, Side marker, Side Reflector,
Rear Reflector, and License Plate Light (Left)
Includes two 7/16" bolts w/ nuts for mounting.
MODEL: CFLIGHTREAR(R)-LED(TEC)
Used on
ALL COM-FAB TRAILER MODELS
TecNiq-T86 8 Function 6" LED Tail Light (Driver Side)
$34.99 $25.75
Brand Com-Fab
General
TecNiq-T86 8 Function 8" Box Driver Side Tail Light w/ Pig Tail.
-
Multi-Function 6" box tail light
-
Urethane Potting w/ Guaranteed Circuit Board Protection
-
Dust and water proof with hermetic seal
-
Durable impact resistant lens
-
Meets all FMVSS 108 requirements for narrow and wide vehicles
-
Reliable performance over 100,000 hours
-
Fits standard mounting as a direct replacement
-
Functions include: Stop, Turn, Tail, Clearance, Side marker, Side Reflector,
Rear Reflector, and License Plate Light (Left)
Includes two 7/16" bolts w/ nuts for mounting.
MODEL: CFLIGHTREAR(L)-LED(TEC)
Used on
ALL COM-FAB TRAILER MODELS