Products
7000# Zinc Tie Plate for 2" Square Axle Tubing
$9.99
Brand Com-Fab
General
7000# Zinc Axle Tie Plate w/ 4.49" x 3.5" Dimensions for 2" Tubing and 1.75" Spring Width
TIE DOWN MODEL: 44849DZ
MODEL: CFAXLE-TIEPLATE(7000-Z)
Specifications
Axle Size: 2" x 2" Square Axle
U-Bolt Size: 1/2"-13 x 2.06" x 4.31"
Dimensions: 4.49" x 3.5"
Tube Width: 2"
Spring Width: 1-3/4"
Hole Diameter: 9/16"
U-Bolt Finish: Zinc
Plate Finish: Zinc
8.25" x 1.5" x .25" Galvanized Flat Plate w/ 7/16" Holes - Shackle Link
$6.99
Brand Com-Fab
General
8.25" x 1.5" x .25" Galvanized Flat Plate w/ 7/16" Holes and 3.5" Hole Centers - Shackle Link
This item is part of the 2213G - Bunk Board Mounting Kit used to mount Bunk Boards onto PWT-2213G, and PWT-2214G trailer models.
MODEL: CFFLTSTRPBUNK(DBL)G
Used on
8.25" x 1.5" x .25" Zinc Flat Plate w/ 7/16" Holes - Shackle Link
$6.99
Brand Com-Fab
General
8.25" x1.5" x .25" Zinc Flat Plate w/ 7/16" Holes and a 3.5" Hole Center - Shackle Link
This item is part of the 2213B - Bunk Mounting Kit used to mount Bunk Boards onto 2213B, and 2214B trailer models.
MODEL: CFFLTSTRPBUNK(DBL)Z
Used on
80IN 14GA Galvanized Crossbar
$70.00
Brand Com-Fab Trailers
84″ Grey Flex Hose Banjo-Banjo Brake Line - Dexter
$60.00
Brand Com-Fab
General
84″ Grey Flex Hose Banjo-Banjo Brake Line - Dexter
This item is used to connect two Aluminum E-Coat Caliper Assemblies on Tandem Axle Pontoon Boat Trailers.
MODEL: CFBRKELINE-84BB(GREY)
Used on
8″ Galvanized Adjustable Bolster Bunk Bracket
$7.99 $4.50
Brand Com-Fab
General
8″ Galvanized Adjustable Bolster Bunk Bracket
This item is part of these kits:
- Jon Boat Trailer Bunk Mounting Kit
- Jon Boat Trailer Bow Support Mounting Kit
- 'River Hawk' Jon Boat Trailer Bunk Mounting Kit
TIE DOWN MODEL: 86130G
MODEL: CFBRKTBLSTR
Used on
9/16"-18 Nylock Nut
$1.53
Brand Com-Fab
General
9/16"-18 Nylock Nut
- This item is part of the Pontoon Boat Trailer Single Axle Mounting Kit used for mounting 3500 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles to all Single Axle Pontoon Boat Trailer models.
- This item is part of the Pontoon Boat Trailer Tandem Axle Mounting Kit used to mount two 3500 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles to all Tandem Axle Pontoon Boat Trailer models.
MODEL: CFAXLE-NUT(1/2NYLOCK-Z)
Used on
9/16"-18 x 3" Shackle Bolt
$7.99
Brand Com-Fab
General
9/16"-18 x 3" Shackle Bolt
- This item is part of the Pontoon Boat Trailer Single Axle Mounting Kit used to mount 3500 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles to all Single Axle Pontoon Boat Trailer models.
- This item is part of the Pontoon Boat Trailer Tandem Axle Mounting Kit used to mount two 3500 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles to all Tandem Axle Pontoon Boat Trailer models.
MODEL: CFAXLE-BLT(SHACKLE-Z)
Used on
Actuator Coupler Mounting Kit for 3" Wide Trailer Tongue
$9.99
Brand Com-Fab
General
Actuator Coupler Mounting Kit for 3" Wide Trailer Tongue
It is used to mount Actuators to all Pontoon Boat Trailer models w/ Brakes.
Materials Include:
3 - 1/2″-13 x 4″ Zinc Hex Head Cap Bolt
MODEL: CFCPLRNUT/BLT-KIT-3
Used on
Angler Kayak Trailer Bunk Mounting Kit
$19.99
Brand Com-Fab
This kit contains all of the materials necessary to mount a bunk on one of our canoe or kayak trailers. The kit contains:
2 – 3/8”-16 x 2.06” x 2.88” Zinc U-Bolt
2 – 4" x 1" x .25" Zinc Flat Plate
2 – Galvanized Angular Swivel Bracket
4 – 3/8"-16 Serrated Zinc Flange Nut
4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw
Angler Option
Brand Com-Fab
AstroSlicks Plastic Padding for Canoe/Kayak Trailers and Kits
$4.99
Brand Com-Fab Trailers
Black Powder Coated 545 Bolt 1250/1350LB Hub Assembly - Dexter
$79.99 $69.99
Brand Com-Fab
General
Black Powder Coated 545 Bolt 1250/1350LB Hub Assembly w/ Bearings, Seal, Amp, and Dust Cap - Dexter
Hub Includes:
- Triple Lip Grease Seal - 1.25" I.D. - 1.98"
- 1-1/16" Bearing Cup
- Cotter Pin
MODEL: CFAXLE-HUB5BLT(1350-B)
Used on
Black Powder Coated Axle Mounting Kit
$7.99
Brand Com-Fab
General
Black Powder Coated Axle Mounting Kit
This kit is used to mount Black Powder Coated Axles to Black Powder Coated PWT Trailer models.
Materials Include:
2 - 1/2" x 3" Zinc Hex Head Bolt
2 - 1/2"-13 Zinc Flange Top Lock Nut
MODEL: CFAXLEKIT-MOUNT(Z)
Used on
Black Powder Coated Side Mount Spare Tire Carrier
$49.99 $35.00
Brand Com-Fab
General
Black Powder Coated Side Mount Spare Tire Carrier
- This item is optional for all of our Black Powder Coated Trailer models.
- It can accommodate wheels from 10" to 16.5" with a spare tire.
- It fits all 4 and 5 lug wheels with 4" and 4.5" diameter hole patterns.
- The powder coated finish provides long lasting protection.
- The item can mount to trailer frames up to 3" wide and 4" high.
*Used on Black Powder Coated Trailer Models Only
TIEDOWN MODEL: #86100
MODEL: CFSTB-SIDE(B)
Installation Instructions
1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.
2. Slide U-bolt around the frame and through the holes in tire carrier.
3. Mount with flat washers, lock washers and nuts provided.
4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.
5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.
6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.
7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.
Optional for
ALL BLACK POWDER COATED TRAILER MODELS
Brake Caliper Bleeder Valve
$1.99
Brand Com-Fab
General
Tie Down Stainless Steel Caliper Bleeder Valve
This item is used on all TIE DOWN Aluminum E-Coat Caliper Assemblies. This item has a 1/8"-27 Stainless Steel Bleed Port.
TIE DOWN MODEL: #12114
MODEL: CFBRKE-BLEEDER
Used on
Brass Banjo Brake Fitting Base
$9.99
Brand Com-Fab
General
Brass Banjo Brake Fitting Base
This item is used in conjunction with a banjo fitting bolt, a Black O-Ring and a Copper Washer for brake line quick connect.
For use with:
TIE DOWN MODEL: #11348
MODEL: CFBRKE-BASEBANJO
Brass Banjo Fitting Bolt for (Round) Banjo-fitted Brake Lines
$4.99
Brand Com-Fab
General
Brass Banjo Fitting Bolt for (Round) Banjo-fitted Brake Lines
This item is used in conjunction with 64" Grey Flex Banjo-Banjo Brake Lines, O-Rings and Copper Banjo Fitting Washers to connect Aluminum E-Coat Caliber Assemblies on all tandem axle pontoon trailer models.
For use with:
MODEL: CFBRKE-BLTBANJO(RD)
Used on
Company Graphic for Double PWT and Pontoon Trailers
$14.99
Brand Com-Fab
General
Company Graphic for Double PWT and Pontoon Trailers
This graphic sticks to the side of all Double PWT and Pontoon Boat Trailer models.
Dimensions: 30.25" x 3"
MODEL: CFGRAPHIC-(4X2)
Used on
Company Graphic for Single PWT and Jon Boat Trailers
$9.99
Brand Com-Fab
General
Company Graphic for Single PWT and Jon Boat Trailers
This graphic sticks to the side of all Single PWT, Jon Boat, and PWT-2212 trailer models.
Dimensions: 19.75" x 2"
MODEL: CFGRAPHIC-(3X1.5)
Used on
Coupler Mounting Kit for 3" Wide Trailer Tongues
$7.99
Brand Com-Fab
General
Coupler Mounting Kit for 3" Wide Trailer Tongues
This item is used to mount Couplers to all trailer models without Brakes.
Materials Include:
2 - 1/2″-13 x 4″ Zinc Hex Head Cap Bolt
2 - 1/2″- 13 Zinc Top Lock Nut
MODEL: CFCPLR-MNTKIT(NONBRK)
Used on
ALL COM-FAB TRAILER MODELS
Coupler Safety Pin
$12.99
Brand Com-Fab
General
Coupler Safety Pin
1/16-1/8IN 7x7x12.5 w/ 5/16 Safety Cable Pin. Used for Model TDE 660E and TDE 850E Actuators to Prevent Latch from Coming Undone
MODEL: CFCPLR-PIN
Crossbar Mounting Kit
$17.99
Brand Com-Fab
General
Kayak/Canoe Trailer Crossbar Mounting Kit
This kit is used to mount crossbars on all Kayak/Canoe Trailer Models.
This kit includes:
2 – 3/8”-16 x 2.06” x 2.88” Zinc U-Bolt
4 – 3/8″ Zinc Hex Flange Top Lock Nut
4 – 3/8″ Galvanized Flat Washer
1 – Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
2 – Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
DL 1400 lb Capacity Heavy Duty Winch
$79.99
Brand Com-Fab
This product is sold out
General
Dutton Lainson 1400 lb Capacity Heavy Duty Winch
This item is a Dutton Lainson Heavy Duty Winch w/ 1400 lb capacity for horizontal pulling applications and 2 speeds.
Materials Included:
– 1/2″ Zinc Nylock Nut for RAM 600/1600 Winch Handle
MODEL: CFWNCH1400DL