Products
#Bold Test Product with variants
$20.00
Brand Bold Commerce
#Bold Test Product without variants
$15.00
Brand Bold Commerce
'River Hawk' Jon Boat Trailer Bunk Mounting Kit
$39.99
Brand Com-Fab
General
'River Hawk' Jon Boat Trailer Bunk Mounting Kit
This kit contains all of the requisite materials needed to mount a 2″ x 4″ x 10′ Black Marine Carpeted Bunk Board onto the JBT-1600 'River Hawk' Style Jon Boat Trailer model.
Materials Include:
3 – 3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt
3 – 8″ Adjustable Bolster Bunk Bracket
3 – 3/8″-16 x 1" Galvanized Hex Head Bolt
3 – Galvanized Angular Swivel Bracket
6 – 3/8″-16 Galvanized Tri-Lock Nut
9 – 3/8″-16 Galvanized Flat Washer
6 – 5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw
MODEL: CFBNKKIT-JBT(HAWK)
Used on
JBT-1600 'River Hawk'
1"-14 Thread 12 Position Castle Nut
$4.00
Brand Com-Fab
This product is sold out
General
12 Position Castle Nut
This item is fastened to the end of an Axle Spindle with the use of a 5/32" x 2" Zinc Plated Cotter Pin. This combination secures Hubs to all PWC Trailer Models. It is rated for axles less than 3000 lbs. It is a 1"-14 Thread 12-Slot Castle Nut to fit standard 1" trailer spindles.
TIE DOWN MODEL: #10634
MODEL: CFAXLE-NUT(CASTLE-L)
Used on
1-1/16" L44610 Axle Bearing Cup
$7.99
Brand Com-Fab Trailers
1-1/16" L44649 Bearings
$5.75
Brand Com-Fab
General
1-1/16" L44649 Bearings
These bearings fit a 1-1/16" diameter Spindle Shaft, and are used with L44610 Bearing Cups. These are used on Tie-Down #1350, and #1750 Hubs
UNIVERSAL MODEL: L44649
TIE DOWN MODEL: #11054
MODEL: CFAXLE-BRG(1-1/16")-INNER/OUTER
Used on
ALL COM-FAB PWC, JON BOAT, AND CANOE/KAYAK TRAILER MODELS
1-3/8" L68149 Axle Bearing Cup
$10.99
Brand Com-Fab Trailers
This product is sold out
1/2"-20 Long Chrome Acorn Lug Nut (Set of 5)
$16.25
Brand Com-Fab
General
1/2"-20 Long Chrome Acorn Lug Nut (Set of 5)
These are used on 1 1/2-20" Threaded Studs with a Long Stainless Steel Cap for T09/BM V-Spoke Rim on an ST175/80R13 D Load Range 13" Aluminum Tire and Wheel, but is optional for all trailer models.
MODEL: CFAXLE-NUT(LUG-CHROME)
Optional for
ALL COMFAB TRAILER MODELS
1/2″-20 Lug Nut (Set of 5)
$7.50
Brand Com-Fab
General
1/2″-20 Lug Nut (Set of 5)
These are used for mounting tires on all trailer models to 1 1/2"-20 Threaded Stud.
MODEL: CFNUTLUG
Used on
ALL COM-FAB TRAILER MODELS WITH SILVER E-COAT OR GALVANIZED WHEELS
10 ft Walk Board Black Marine Carpet
$33.00
Brand Com-Fab
General
10 ft Walk Board Black Marine Carpet
Protective carpeting for the 2″ x 8″ x 10′ Black Marine Carpeted Center Walk Board used on all of our Double PWC Trailer Models.
11 ft by 14.4 in to fully cover the walk board
Used on
10" Galvanized Adjustable Bolster Bunk Bracket
$10.00
Brand Com-Fab
General
10" Galvanized Adjustable Bolster Bunk Bracket
These are optional Bolster Brackets for all Jon Boat Trailer models.
Jon Boat Trailer Bunk Mounting Kit
TIE DOWN MODEL: #86131G
MODEL: CFBRKTBLSTR-10
Optional for
10.25" Black Marine Carpet
$2.50
Brand Com-Fab
General
Black Marine Carpet 10.25" Width
$2/ft in 100 ft rolls
- This carpet is used for bunks on all of our PWC Trailer, and Jon Boat Trailer models. It is optional for our Pontoon Trailer models and Canoe/Kayak Angler Kits.
If you are purchasing this carpet it needs to be a foot longer than the board itself.
This carpet comes in these specific sizes as well:
- 5 ft Bunk Board Black Marine Carpet
- 6 ft Bunk Board Black Marine Carpet
- 7 ft Bunk Board Black Marine Carpet
MODEL: CFBNKCOVER-CARPET(10.25)
Used on
JBT-900
JBT-1400
JBT-1600
JBT-1600 ‘RIVER HAWK’
Optional for
1000 lb Black Powder Coated PWC Trailer Axle w/ Hubs and Springs HF 50.5 SC 41.18
$239.99
Brand Com-Fab
General
1000 lb Black Powder Coated PWC Trailer Axle w/ Hubs and Springs
*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*
Materials Include:
1 - 44.5" x 1.5" x 1.5" x 11 Gauge Black Powder Coated Axle Tubing
2 - Black Powder Coated 5-Bolt Hub Assembly
2 - 2-Leaf Slipper Spring (550 lb)
This item is mounted to the PWT-800B with a Black Powder Coated Axle Mounting Kit.
MODEL: CFAXLE1000B
Specifications
Tubing: 1.5" Black Powder Coated Square Axle
Load Rating: 1000 lb
Hub Face: 50.5"
Spring Center: 41.188"
Overall Length: 56"
Bearing Size: 1-1/16"
Used on
PWT-800B
1000 lb Galvanized PWC Trailer Axle w/ Hubs and Springs HF 50.5 SC 41.18
$239.99
Brand Com-Fab
General
1000 lb Galvanized PWC Trailer Axle w/ Hubs and Springs
*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*
Materials Include:
1 - 44.5" x 1.5" x 1.5" x 11 Gauge Galvanized Axle Tubing
2 - Galvanized 5-Bolt Hub Assembly
2 - 2-Leaf Slipper Spring (550 lb)
This item is mounted to the PWT-800G, and all Jon Boat Trailer models with a Galvanized Axle Mounting Kit.
MODEL: CFAXLE1000G
Specifications
Tubing: 1.5" Galvanized Square Axle
Load Rating: 1000 lb
Hub Face: 50.5"
Spring Center: 41.188"
Overall Length: 56"
Bearing Size: 1-1/16"
Used on
12.5" Galvanized Adjustable Keel Roller Bracket
$14.99
Brand Com-Fab
General
12.5" Galvanized Adjustable Keel Roller Bracket
Two of these are used with:
1 – 5" Poly Keel Roller
1 – 1/2″ Zinc Top Lock Nut
to create Keel Poly Roller Assemblies for JBT-1600 Frames.
TIE DOWN MODEL: #44017
MODEL: CFBRKTKEEL
Used on
1200 lb Side Crank Swivel Jack
$49.99
Brand Com-Fab
General
1200 lb Side Crank Swivel Jack
This item fits 3″ x 5“ tongues. It comes with a 1200 lb Side Crank Swivel Jack Mounting Kit.
MAXIMUM CAPACITY: 1200LB
PACIDIC RIM MODEL: MJ-1200B
MODEL: CFJACKSIDE
Used on
JBT-900
JBT-1400
JBT-1600
JBT-1600 ‘RIVER HAWK’
PT-1400 'MiniToon'
PT-1618
PT-1820
PT-2022
12′ Winch Strap w/ Spring Loaded Hook and Loop End
$20.00
Brand Com-Fab
General
12′ Winch Strap w/ Spring Loaded Hook and Loop End
Strap is generally sold as a replacement part for the Dutton-Lainson 900 lb Capacity Crank Winch (CFWNCH900DL). If you have a Com-Fab PWC trailer this is the replacement strap for your trailer's winch. The strap has the following capabilities:
- Strap working load limit: 1,700 lbs
- Break strength: 2,600 lbs
- 12' Long strap with hook
- Hand saver loop dimensions: 1" x 18"
- Steel hook tensile strength: 3,750 lbs
- Mounting bolt dimensions: 2-1/2" x 1/4" bolt
MODEL: CFWNCHSTRAP-12FT(PWC)
Used on
13" Silver E-Coat Tire & Wheel ST175/80R13 C Load Range-Provider
$120.00
Brand Com-Fab Trailers
13" Silver E-Coat Tire & Wheel ST175/80R13 C Load Range-Provider
This item is used on PWT-2213B, and PWT-2214B trailer models. Tire Capacity of 1360lbs (615kg). Speed rating of 81 mph. Max 50 PSI.
13" White Tire & Wheel ST175/80D13 C Load Range
$120.00
Brand Com-Fab Trailers
13" White Tire & Wheel ST175/80D13 C Load Range
This item is used on PWT-2213, and PWT-2214 trailer models. Tire Capacity of 1360lbs (615kg). Speed rating of 81 mph. Max 50 PSI.
13″ Black Machined V-Spoke Aluminum Tire & Wheel ST175/80R13 D Load Range
$235.00
Brand Com-Fab
General
ST175/80R13 D Load Range 13″ Aluminum Tire & Wheel 65 psi
This item is an upgradable option for all Trailer Models with 13" Tires. Speed rating is 81 mph.
MODEL: CFTST175RLRD-VSPOKE
Upgrade for
13″ Galvanized Tire & Wheel ST175/80D13 C Load Range
$105.00
Brand Com-Fab
General
ST175/80D13 C Load Range 13″ Galv. Tire & Wheel 65 psi
SThis item is used on PWT-2213G, PWT-2214G, and our smaller Pontoon Boat Trailer models. Speed rating is 81 mph
MODEL: CFST175DLRC-G
Used on
13″ Galvanized Tire & Wheel ST175/80R13 D Load Range
$135.00
Brand Com-Fab
General
ST175/80R13 D Load Range 13″ Galvanized Tire & Wheel 65 psi
This item is used on our PT-2426, and PT-2628 Trailer Models, but is also an upgradable option for all Trailer Models with 13" Tires. Speed rating is 81 mph.
MODEL: CFT175DLRD-G
Used on
Upgrade for
13″ Silver E-Coat Tire & Wheel ST175/80D13 C Load Range - Kenda/Loadstar
$99.99 $84.99
Brand Com-Fab
General
ST175/80D13 C Load Range, 13″ Silver E-Coat Finish Tire & Wheel 50 psi - Kenda/Loadstar
This item is used on PWT-2213B, and PWT-2214B trailer models. Tire Capacity of 1360lbs (615kg). Speed rating of 81 mph. Max 50 PSI.
MODEL: CFT175DLRC-S
Used on
14.4" Black Marine Carpet
$3.00
Brand Com-Fab
General
10 ft Walk Board Black Marine Carpet
Protective carpeting for the 2″ x 8″ x 10′ Black Marine Carpeted Center Walk Board used on all of our Double PWC Trailer Models.
$2.25/ft in 100 ft rolls
If you are purchasing this carpet it needs to be a foot longer than the board itself.