Part

General

32" Galvanized Jon Boat Trailer Winch Assembly w/ RAM 600LB Winch

This assembly includes:

- 32" Galvanized Winch Post 

- RAM 600 lb Capacity Crank Winch

- Winch Poly Bow Roller Assembly

- Jon Boat Trailer Winch Assembly Mounting Kit

MODEL: CFWNCHASSM-JBT

Used on:

General

32″ Black Powder Coated Winch Assembly (Smooth High Gloss Bengal Black) w/ DL 600 lb Winch

Materials Include

1 - 32" Black Powder Coated Winch Post, Smooth High Gloss Bengal Black

1 - 600 lb Capacity Dutton-Lainson Crank Winch w/ Handle

1 - Winch Poly Bow Roller Assembly

1 - Black Powder Coated Winch Assembly Mounting Kit

When mounted, the standard height for the bow roller is 18", but it can be adjusted to accommodate your particular boat. This is a 3" wide post with a 3" wide u-bolt mounting kit.

MODEL: CFWNCHASSM-2214B (BENGAL)

Used on

General

32″ Black Powder Coated Winch Post (Smooth High Gloss Bengal)

This item is part of the 32″ Black Powder Coated Winch Assembly (Smooth High Gloss Bengal) w/ DL 600LB Winch that mounts to the PWT-2213B (Obsolete since 2023), and PWT-2214B trailer models with Zinc U Bolt Winch Assembly for Black Powder Coated Trailers.

MODEL: CFWNCHPOST(PWC-32)-B (BENGAL)

Used on

General

32″ Galvanized Winch Post

- This item is part of the 32″ Galvanized Winch Assembly which is mounted to the PWT-2213G, and PWT-2214G trailer models.

- This item is part of the 32" Galvanized Jon Boat Trailer Winch Assembly which is mounted every Jon Boat Trailer model.

MODEL: CFWNCHPOST(PWC-32)-G

Used on

General

32″ Galvanized Winch Assembly w/ Dutton-Lainson 600LB Winch

This assembly includes:

- 32" Galvanized Winch Post

- Dutton-Lainson 600 lb Capacity Crank Winch

- Winch Poly Bow Roller Assembly

- Galvanized Winch Assembly Mounting Kit

When mounted, the standard height for the bow roller is 18", but it can be adjusted to accommodate your particular boat. This is a 3" wide post with a 3" wide ubolt mounting kit.

MODEL: CFWNCHASSM-2214G

Used on:

General

35' 4-Pin Wire Harness Assembled w/ Protective Sleeve

The wiring is pulled through the trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Pin Male Connector. This item comes with a 3/8 20" Protective Sleeve and 30" Ground with 1/2" Ring Terminal.

MODEL: CFWH35

Used on

General

3500 lb Hydraulic Disc Brake Trailer Axle w/ Hubs and Springs, Galvanized

*This Item Is Not Shipped! Only Available For Local Pickup*

This item is used on all tandem, and single axle brake setup pontoon trailers.

Materials Include:

1 - 80.375" x 2" x 2" x .17" Gauge Galvanized Axle Tubing

2 - Galvanized 5-Bolt Hub Assembly

2 - 3-Leaf Double Eye Springs (1850 lb)

1 - 7000# Galvanized Tie Plate Kit

1 - Vented Rotor Disc Brake Kit

- It can be mounted to a Single Axle Pontoon Boat Trailer Fender with a Pontoon Boat Trailer Single Axle Mounting Kit.

- Two of them can be mounted to Tandem Axle Pontoon Boat Trailer Fenders with a Pontoon Boat Trailer Tandem Axle Mounting Kit

**Some states require brakes on all axles and/or wheels. please refer to local laws when placing your order. It is up to the individual dealer to stay within the guidelines as set by the legal authorities.

MODEL: CFAXLE3500G(DISC)-PT

Specifications

Tubing: 2" Galvanized Square Axle

Load Rating: 3500 lb

Hub Face: 87"

Spring Center: 74"

Overall Length: 92"

Bearing Size: 1-3/8" x 1-1/16"

Optional On

General

3″ Amber Poly Bow Roller 

This item is used as part of every Winch Assembly mounted on every PWT, and Jon Boat Trailer model.

This item is part of these assemblies:

- 3" Poly Bow Roller Assembly

- Winch Poly Bow Roller Assembly

MODEL: CFPOLYBOWRLR-3

MPN: TDE 48653

Used on:

General

3″ Amber Poly Bow Roller Bell End

This item is used as part of every Winch Assembly mounted on every PWT, and Jon Boat Trailer model.

This item is part of these assemblies:

- 3" Poly Bow Roller Assembly

- Winch Poly Bow Roller Assembly

MODEL: CFPOLYEBELL-3

MPN: TDE 48654

Used on

General

4" x 1" x .25" Galvanized Flat Plate w/ 2 1/2" Holes and a 2.5" Hole Center - Shackle Link

- This item is part of the CFBNKKIT-PWT(SGL-G) to mount Bunk Boards onto PWT-800G, PWT-1000G, and PWT-1100G trailer models.

- This item is part of the Tall Galvanized Bunk Bracket Kit used to mount mount 2″ x 4″ or 2″ x 6″ bunk boards on all Pontoon Boat Trailer models.

MODEL: CFFLTSTRPBUNK(SGL)G

Used on

General

4" x 1" x .25" Zinc Flat Plate w/ 1/2" Holes and a 2.5" Hole Center - Shackle Link

- This item is part of the CFBNKKIT-PWT(SGL-PC) used to mount Bunk Boards onto PWT-800B, PWT-1000B, and PWT-1100B trailer models.

MODEL: CFFLTSTRPBUNK(SGL)Z

Used on

General

4-Leaf Double Eye Springs 1850 lb Maximum Capacity

These are mounted to the 2900 lb Idler Trailer Axle, or the 3500 lb Hydraulic Disc Brake Trailer Axle using a 7000# Galvanized Tie Plate Kit. These are used on all of our Single, and Tandem Axle Pontoon Boat Trailer models. 

Specifications

Length: 20.00"

Leaf Width: 1.75"

Arch Height: 3.00"

Bushing Type: Nylon

Used on

General

4-Leaf Slipper Springs 1000 lb Maximum Capacity (Qty 2)

- This item is mounted to the 2000 lb Extended Galvanized Trailer Axle with a Galvanized Tie Plate Kit.

DEXTER MODEL: #13071

MODEL: CFAXLE-LSPRNG(4-SF)

Specifications

Length: 24.63"

Leaf Width: 1.75"

Arch Height: 4.50"

Bushing Type: Nylon

Used on

General

4.80 x 12″ C Load Range 545 Hole Pattern Silver E-Coat Finish Bias Tire & Wheel - Kenda/Loadstar

This is the tire and wheel used on PWT-800B, PWT-1000B, PWT-1100B, and PWT-2212B black powder coated trailer models. Tire capacity is 990lbs (450kg). Speed rating 65 mph.

MODEL: CFT48012S-LRC

Used on

General

4.80 x 12″ Load Range C 545 Hole Pattern AM02/BM Black Machined Aluminum V-Spoke Bias Tire & Wheel - Kenda/Loadstar

This is the tire and wheel used on the PWT1100AL model and optional for PWT-800, PWT-1000, PWT-1100, and PWT-2212 black powder coated and galvanized trailer models. Speed rating 81 mph.

MODEL: CFT48012-VSPOKE(BM)-LRC

Used on

PWT-1100AL

Optional for

General

5" x 1.25" x .25" Galvanized Flat Plate w/ 2 9/16" Holes and 3.5" Hole Centers

This item is part of these kits:

– Galvanized Winch Assembly Mounting Kit

– 2212G - Fender Mounting Kit (pre-April 2024 Models)

– 2212G - Bunk Mounting Kit

– Jon Boat Trailer Winch Assembly Mounting Kit

– Jon Boat Trailer Fender Mounting Kit

– Jon Boat Trailer Bow Support Mounting Kit

MODEL: CFFLTSTRPWNCHG

Used on

General

5"x 1.25" x .25" Zinc Flat Plate w/ 2 9/16" Holes and 3.5" Hole Centers

This item is part of these kits:

- Black Powder Coated Winch Assembly Mounting Kit

- 2212B - Fender Mounting Kit (pre-April 2024 Models)

- 2212B - Bunk Mounting Kit.

MODEL: CFFLTSTRPWNCHZ

Used on

General

5-Leaf Slipper Springs 1,250 lb Maximum Capacity (Qty 2)

- This item is mounted to the 2500 lb Galvanized Trailer Axle with a BATIE190G Galvanized Tie Plate Kit.

- This item is mounted to the 2500 lb Black Powder Coated Trailer Axle with a BATIE190Z Zinc Tie Plate Kit.

MODEL: CFAXLE5-LSPRNG(SF)

MPN: Dexter 72-13086 or TDE 13086

Specifications

Length: 24.63"

Leaf Width: 1.75"

Arch Height: 4.50"

Bushing Type: Nylon

Used on

General

5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw

It is used for mounting Bunk Boards to Galvanized Angular Swivel Brackets, and Pontoon Boat Trailer Bunk Brackets on all trailer models.

MODEL: CFSCRWLAG-5/16-0150

Used on

ALL COM-FAB TRAILER MODELS

General

5/32" x 2" Cotter Pin, Zinc-Plated for Axle Spindle Hubs

It is used for fastening the Castle Nut to the Axle Spindle.

MODEL: CFAXLE-PIN(COTTER)

MPN: Dexter 019-10560

Used on

ALL COM-FAB TRAILER MODELS

5″ Amber Poly Keel Roller

This item is part of the 5" Poly Keel Roller Assembly mounted onto all Jon Boat trailer models.

MODEL: CFPOLYBOWRLR-5

MPN: TDE 48373

Used on

General

6" x 1.5" x .25" Galvanized Flat Plate w/ 2 7/16" Holes and 4.5" Hole Centers - Shackle Link

- This item is part of the CFFNDRKIT-PWT(DBL-G) used to mount Fenders to PWT-2213G, and PWT-2214G Trailer models.

MODEL: CFFLTSTRPFNDR(DBL-2213/14)G

Used on

General

6" x 1.5" x 1.25" Zinc Flat Plate w/ 2 7/16" Holes and 4.5" Hole Centers - Shackle Link

This item is part of the 2CFFNDRKIT-PWT(DBL-PC) used to mount Fenders onto 2213B, and 2214B trailer models.

MODEL: CFFLTSTRPFNDR(DBL-2213/14)Z

Used on

General

Tie Down 7/16" Diameter x 2.593 Stainless Steel Slider Pin

This item is used for mounting a Tie Down caliper to a 9.6" vented rotor. Stainless steel caliper slide pins are easily accessible with hex heads for quick removal. It allows the caliper to float freely and insures proper alignment during installation. It fits all vented rotor calipers.

MODEL: CFAXLE-PIN(CALIPER-SS)

MPN: TDE 12114 or Dexter 007-692-00

Used on