Part

General

3/8″-16 Serrated Zinc Flange Nut

This item is part of these kits:

- 3/8"-16 Zinc Hex Head Bolts to mount all Crank Winch Models onto all Winch Post models.

- Black Powder Coated Winch Assembly Mounting Kit

- Jon Boat Trailer Winch Assembly Mounting Kit

MODEL: CFNUT3/8SERTDZ

Used on

ALL Powder Coat Finish Trailer Models, and Most Galvanized Trailer Models for Winches

General

4" x 1" x .25" Galvanized Flat Plate w/ 2 1/2" Holes and a 2.5" Hole Center - Shackle Link

- This item is part of the CFBNKKIT-PWT(SGL-G) to mount Bunk Boards onto PWT-800G, PWT-1000G, and PWT-1100G trailer models.

- This item is part of the Tall Galvanized Bunk Bracket Kit used to mount mount 2″ x 4″ or 2″ x 6″ bunk boards on all Pontoon Boat Trailer models.

MODEL: CFFLTSTRPBUNK(SGL)G

Used on

General

4" x 1" x .25" Zinc Flat Plate w/ 1/2" Holes and a 2.5" Hole Center - Shackle Link

- This item is part of the CFBNKKIT-PWT(SGL-PC) used to mount Bunk Boards onto PWT-800B, PWT-1000B, and PWT-1100B trailer models.

MODEL: CFFLTSTRPBUNK(SGL)Z

Used on

General

5" x 1.25" x .25" Galvanized Flat Plate w/ 2 9/16" Holes and 3.5" Hole Centers

This item is part of these kits:

– Galvanized Winch Assembly Mounting Kit

– 2212G - Fender Mounting Kit (pre-April 2024 Models)

– 2212G - Bunk Mounting Kit

– Jon Boat Trailer Winch Assembly Mounting Kit

– Jon Boat Trailer Fender Mounting Kit

– Jon Boat Trailer Bow Support Mounting Kit

MODEL: CFFLTSTRPWNCHG

Used on

General

5"x 1.25" x .25" Zinc Flat Plate w/ 2 9/16" Holes and 3.5" Hole Centers

This item is part of these kits:

- Black Powder Coated Winch Assembly Mounting Kit

- 2212B - Fender Mounting Kit (pre-April 2024 Models)

- 2212B - Bunk Mounting Kit.

MODEL: CFFLTSTRPWNCHZ

Used on

General

5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw

It is used for mounting Bunk Boards to Galvanized Angular Swivel Brackets, and Pontoon Boat Trailer Bunk Brackets on all trailer models.

MODEL: CFSCRWLAG-5/16-0150

Used on

ALL COM-FAB TRAILER MODELS

General

5/32" x 2" Cotter Pin, Zinc-Plated for Axle Spindle Hubs

It is used for fastening the Castle Nut to the Axle Spindle.

MODEL: CFAXLE-PIN(COTTER)

MPN: Dexter 019-10560

Used on

ALL COM-FAB TRAILER MODELS

General

6" x 1.5" x .25" Galvanized Flat Plate w/ 2 7/16" Holes and 4.5" Hole Centers - Shackle Link

- This item is part of the CFFNDRKIT-PWT(DBL-G) used to mount Fenders to PWT-2213G, and PWT-2214G Trailer models.

MODEL: CFFLTSTRPFNDR(DBL-2213/14)G

Used on

General

6" x 1.5" x 1.25" Zinc Flat Plate w/ 2 7/16" Holes and 4.5" Hole Centers - Shackle Link

This item is part of the 2CFFNDRKIT-PWT(DBL-PC) used to mount Fenders onto 2213B, and 2214B trailer models.

MODEL: CFFLTSTRPFNDR(DBL-2213/14)Z

Used on

General

Tie Down 7/16" Diameter x 2.593 Stainless Steel Slider Pin

This item is used for mounting a Tie Down caliper to a 9.6" vented rotor. Stainless steel caliper slide pins are easily accessible with hex heads for quick removal. It allows the caliper to float freely and insures proper alignment during installation. It fits all vented rotor calipers.

MODEL: CFAXLE-PIN(CALIPER-SS)

MPN: TDE 12114 or Dexter 007-692-00

Used on

General

7/16" x 2.06" x 4.31" Galvanized U-Bolt

This item is part of the Kayak/Canoe Trailer Upright Mounting Kit.

MODEL: CFUBLT7/16x2.06x4.31G

MPN: TDE 84051G

Used on

KCT-1200
KCT-1400
KCT-1600

General

7/16"-14 Thread UNC x 1-1/4" Grade 5 Caliper Mounting Bolt, Zinc-Plated

Four of these are used to mount the Galvanized Caliper Mounting Bracket to the Brake Flange on all Trailer Models with Brakes prior to 2023.

MODEL: CFAXLE-BLT(CALPRBRKT-2125X-Z)

MPN: TDE 10812 or Dexter 007-10812

Used on (w/ Brakes pre-2023)

General

8.25" x 1.5" x .25" Galvanized Flat Plate w/ 7/16" Holes and 3.5" Hole Centers - Shackle Link

This item is part of the CFBNKKIT-PWT(DBL-G-25) used to mount Bunk Boards onto PWT-2213G and PWT-2214G trailer models.

MODEL: CFFLTSTRPBUNK(DBL)G

Used on all PWC Tandem/Double Trailers pre-April 2026

General

8.25" x1.5" x .25" Zinc Flat Plate w/ 7/16" Holes and a 3.5" Hole Center - Shackle Link

This item is part of the CFBNKKIT-PWT(DBL-PC) used to mount Bunk Boards onto 2213B, and 2214B trailer models.

MODEL: CFFLTSTRPBUNK(DBL)Z

Used on

General

8″ Galvanized Adjustable Bolster Bunk Bracket

This item is part of these kits:

- Jon Boat Trailer Bunk Mounting Kit

- Jon Boat Trailer Bow Support Mounting Kit

- Extended (EXT)/ 'River Hawk' Jon Boat Trailer Bunk Mounting Kit

MODEL: CFBRKTBLSTR

MPN: TDE 86130G

Used on

General

Black Powder Coated Side Mount Spare Tire Carrier

• This item is optional for all of our Black Powder Coated Trailer models.
• It can accommodate wheels from 10" to 16.5" with a spare tire.
• It fits all 4 and 5 lug wheels with 4" and 4.5" diameter hole patterns.
• The powder coated finish provides long lasting protection.
• The item can mount to trailer frames up to 3" wide and 4" high.
  

*Used on Black Powder Coated Trailer Models Only

TIEDOWN MODEL: #86100

MODEL: CFSTB-SIDE(B)

Installation Instructions

1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.

2. Slide U-bolt around the frame and through the holes in tire carrier.

3. Mount with flat washers, lock washers and nuts provided.

4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.

5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.

6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.

7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.

Optional for

ALL BLACK POWDER COATED TRAILER MODELS

General

Bow Stop and Winch Roller Bracket for Com-Fab (Steel) Marine Trailers, Galvanized

This item is part of the Winch Poly Bow Roller Assembly used on every type of winch stand for all Jon Boat and PWT trailer models. Fits with 1.5" x 3" tubing.

Dimensions: 2" x 3" x 8" w/ Hole 1.853" from Bottom

MODEL: CFBRKTWNCHRLR

Used on

PWT-1000B (Obsolete as of 2023)

General

Galvanized Side Mount Spare Tire Carrier

• This item is optional for all of our Galvanized Trailer models.
• It can accommodate wheels from 10" to 16.5" with a spare tire.
• It fits all 4 and 5 lug wheels with 4" and 4.5" diameter hole patterns.
• The galvanized finish provides long lasting protection.
• The item can mount to trailer frames up to 3" wide and 4" high. 

*Used on Galvanized Trailer Models Only

TIEDOWN MODEL: #86098

MODEL: CFSTB-SIDE(G)

Installation Instructions

1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.

2. Slide U-bolt around the frame and through the holes in tire carrier.

3. Mount with flat washers, lock washers and nuts provided.

4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.

5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.

6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.

7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.

Optional for

ALL GALVANIZED TRAILER MODELS

General

Locking Spare Tire Bracket, fits 3″ Width Tubing

This item is used to lock down, and transport a spare tire on all Com-Fab trailer models. Lock not included.

MODEL: CFSTB-TOP

Optional for

ALL COM-FAB TRAILER MODELS

General

Phoenix Stamping Angle Swivel Bracket, Galvanized - 7/16″ Top Hole

These are used to mount bunk boards onto all Jon Boat, and PWT Trailer models.

This item is part of these kits:

- 1000B/1100B - Bunk Mounting Kit

- 1000G/1100G - Bunk Mounting Kit

- 2212B - Bunk Mounting Kit

- 2212G - Bunk Mounting Kit

- 2213B/2214B - Bunk Mounting Kit

- 2213G/2214G - Bunk Mounting Kit

- Jon Boat Trailer Bunk Mounting Kit

- Jon Boat Trailer Bow Support Mounting Kit

- Extended (EXT)/'River Hawk' Jon Boat Trailer Bunk Mounting Kit

MODEL: CFBRKTSWIVEL

MPN: PS-BB06G

Used on

PWT-1000B (Obsolete as of 2023)

PWT-1000G (Obsolete as of 2023)

PWT-2213B (Obsolete as of 2023)

PWT-2213G (Obsolete as of 2023)

General

PacRim/RAM 1500LB Side Swivel Jack w/ Dual 6IN Caster Wheels

This item fits 3″ x 4" - 5“ tongues. Mounting Hardware included.

MAXIMUM CAPACITY: 1500LB

PACIFIC TRAILER PRODUCTS/RAM MODEL: 

MODEL: CFJACKSIDE-1500(DWL-RAM)

Used on

PT-/TT-2628
PT-/TT-2830