PWT-2214B Parts

General

Dry Launch SP7 Red Tail Light (Passenger Side) - Incandescent

The Dry Launch submersible 7-function passenger side tail light is waterproof with a bulb slide that has built-in dust, and splash guard. It snaps out for easy bulb replacement.

Dimensions:  W = 6"   H = 3.5"   D = 2-1/4"

Materials Include:

2 - 1/4″-18 Tail Light Bolt

2 - 1/4"-18 Zinc Nut

MODEL: CFLIGHTREAR(R)-INC(DL)

MPN: SP7RBX-99X1

Optional for

ALL COM-FAB TRAILER MODELS

General

5-Leaf Slipper Springs 1,250 lb Maximum Capacity (Qty 2)

- This item is mounted to the 2500 lb Galvanized Trailer Axle with a BATIE190G Galvanized Tie Plate Kit.

- This item is mounted to the 2500 lb Black Powder Coated Trailer Axle with a BATIE190Z Zinc Tie Plate Kit.

MODEL: CFAXLE5-LSPRNG(SF)

MPN: Dexter 72-13086 or TDE 13086

Specifications

Length: 24.63"

Leaf Width: 1.75"

Arch Height: 4.50"

Bushing Type: Nylon

Used on

General

Locking Spare Tire Bracket, fits 3″ Width Tubing

This item is used to lock down, and transport a spare tire on all Com-Fab trailer models. Lock not included.

MODEL: CFSTB-TOP

Optional for

ALL COM-FAB TRAILER MODELS

General

TecNiq-T86 7 Function 6" Box LED Passenger Side Tail Light w/ Pigtail

• These are optional for all Trailer Models.
• Multi-Function 6" Box Tail Light
• Urethane Potting w/ Guaranteed Circuit Board Protection
• Dust and water proof with hermetic seal
• Durable impact resistant lens
• Meets all FMVSS 108 requirements for narrow and wide vehicles
• Reliable performance over 100,000 hours
• Fits standard mounting as a direct replacement
• Functions include: Stop, Turn, Tail, Clearance, Side marker, Side Reflector,
  Rear Reflector, and License Plate Light (Left)

Includes two 7/16" bolts w/ nuts for mounting.

MODEL: CFLIGHTREAR(R)-LED(TEC)

MPN: T86-RR2RG-1

Used on

ALL COM-FAB TRAILER MODELS

General

Dry Launch SP7 Red Tail Light (Driver Side) - Incandescent

The Dry Launch submersible 8-function driver side tail light is waterproof with a bulb slide that has a built-in dust and splash guard. It snaps out for easy bulb replacement.

Dimensions:  W = 6"   H = 3.5"   D = 2-1/4"

Materials Include:

2 - 1/4″ - 18 Tail Light Bolt

2 - 1/4" -18 Zinc Nut

MODEL: CFLIGHTREAR(L)-INC(DL)

MPN: SP7RBX-99X1

Optional for

ALL COM-FAB TRAILER MODELS

General

D.L. 12′ Winch Strap w/ Spring Loaded Hook and Loop End

Strap is generally sold as a replacement part for the Dutton-Lainson 900lb & 600lb Capacity Crank Winch (CFWNCH900(DL) or CFWNCH600(DL)). If you have a Com-Fab PWC trailer this is the replacement strap for your trailer's winch. The strap has the following capabilities:

- Strap working load limit: 1,700 lbs

- Break strength: 2,600 lbs

- 12' Long strap with hook

- Hand saver loop dimensions: 1" x 18"

- Steel hook tensile strength: 3,750 lbs

- Mounting bolt & nut dimensions: 2-3/4"-20 Hex Head Bolt, Zinc & 1/4"-20 Hex Head External Tooth Locknut, Zinc

MODEL: CFWNCHSTRAP-12FT(PWC)

MPN: D.L. 24223

Used on:

General

Winch Poly Bow Roller Assembly

This kit is part of every Winch Assembly used on every PWT, and Jon Boat Trailer model. 

Materials Include:

1 – Galvanized Bow Stop Bracket

1 – 3/8″-16 x 3.75″ Zinc Hex Head Cap Bolt

1 – 3/8″-16 Zinc Hex Flange Top Lock Nut

1 – 1/2″-13 x 4.5″ Zinc Hex Head Cap Bolt

1 – 1/2″-13 Zinc Top Lock Nut

1 – 3″ Amber Poly Bow Roller

2 – 3″ Amber Poly Bow Roller Bell End

2 – 1/2″- Zinc Flat Washer

MODEL: CFASSM-WNCHRLR(3)

Used on

General

ST175/80D13 13" C Load Range 545 Hole Pattern Silver E-Coat Finish Bias Tire & Wheel - Kenda/Loadstar, 50 psi

This item is used on PWT-2213B, and PWT-2214B trailer models. Tire Capacity of 1360lbs (615kg). Speed rating of 81 mph. Max 50 PSI.

MODEL: CFT175DLRC-S

Used on

General

3/8"-16 Zinc Hex Flange Top Lock Nut Zinc

This item is part of the:

– 1000B - Bunk Mounting Kit

– 2212B - Fender Mounting Kit

– 2213B - Fender Mounting Kit

– Winch Poly Bow Roller Assembly

– Pontoon Boat Trailer Winch Assembly

MODEL: CFNUT3/8LOCKZ

Used on

ALL COM-FAB TRAILER MODELS

General

5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw

It is used for mounting Bunk Boards to Galvanized Angular Swivel Brackets, and Pontoon Boat Trailer Bunk Brackets on all trailer models.

MODEL: CFSCRWLAG-5/16-0150

Used on

ALL COM-FAB TRAILER MODELS

General

Dutton-Lainson 600LB Capacity Crank Winch

This item is a heavy duty winch used for horizontal pulling applications. It contains high carbon steel gears, permanently lubricated bearings, and a zinc Tuffplate(c) finish. A 12′ Winch Strap w/ Spring Loaded Hook and Loop End, and a Dutton-Lainson 900 lb 5" Winch Handle.

The mounting materials are sold separately.

Recommended for Mounting (Com-Fab):

2 - 3/8-16 x 1" Hex Head Bolt, Zinc

2 - 3/8-16 Serrated Flange Hex Nut, Zinc

MODEL: CFWNCH600(DL)

MPN: D.L. 14156

Used on:

General

TecNiq License Plate Bracket

MODEL: CFTAG-TEC

TECNIQ MODEL: L95-0B00-1

Used on

ALL COM-FAB TRAILER MODELS

General

Black Powder Coated 545 Bolt 1250/1350LB Hub Assembly w/ Bearings, Seal, Amp, and Dust Cap - Dexter

Hub Includes:

- Triple Lip Grease Seal - 1.25" I.D. - 1.98" 

- 1-1/16" Bearing Cup

- 1-1/16" L44649 Bearings

- 1-1/2"-20 Lug Nut Studs

- 1/2″-20 Lug Nut (Set of 5)

- 1.98" Dust Cap

- Super Lube Rubber Grommet

- Cotter Pin

MODEL: CFAXLE-HUB5BLT(1350-B)

Used on

General

TecNiq-S14 Amber LED Mini PC Side Marker Light with 24" Lead

• Comes with a 1/4" Nut.
• Brilliant illumination in a compact size
• IP 68 Rated - Dust and water proof
• TecSeal Urethane Potting - Guaranteed Circuit Board Protection
• Stud-mounted, no visible fasteners
• Reliable performance over 100,000 hours
• Vertical mount positions meets P2 specifications, while horizontal mount meets PC specifications 

MODEL: CFLIGHTSDMRKR-LED(TEC-A24)

MPN: S14-AAS0-1

Used on 

General

32″ Black Powder Coated Winch Assembly (Smooth High Gloss Bengal Black) w/ DL 600 lb Winch

Materials Include

1 - 32" Black Powder Coated Winch Post, Smooth High Gloss Bengal Black

1 - 600 lb Capacity Dutton-Lainson Crank Winch w/ Handle

1 - Winch Poly Bow Roller Assembly

1 - Black Powder Coated Winch Assembly Mounting Kit

When mounted, the standard height for the bow roller is 18", but it can be adjusted to accommodate your particular boat. This is a 3" wide post with a 3" wide u-bolt mounting kit.

MODEL: CFWNCHASSM-2214B (BENGAL)

Used on

General

Dutton-Lainson 980 2" Ball Class II (3,500 lb) Zinc-Plated Latch Coupler for 3″ Wide Trailer Tongue

This item mounts to pre-2022 PWT-2213 and PWT-2214 trailer models with a Coupler Mounting Kit. For those model trailers made after 2022, they currently use the CFCPLR(RAM)-3x3 as the standard coupler.

MODEL: CFCPLR(DL)-980

MPN: D.L. 13824F

Specifications

Hole Diameter: 1/2"

Hole Distance: 2 1/2"

Hole Distance from Top: 5/8"

Hole Distance from Base: 1"

Used on

General

RAM 1200LB Side Crank Swivel Jack

This item fits 3″ x 3" - 5“ tongues. Mounting Hardware is included.

MAXIMUM CAPACITY: 1200LB

RAM MODEL: MJ-1200B

MODEL: CFJACKSIDE-1200(RAM)

Used on

PWT-2214G 
JBT-1200 (Formerly JBT-900)
JBT-1400 
JBT-1600
JBT-1600 (EXT) ((Formerly JBT-1600 ‘RIVER HAWK’)
PT-1400 'MiniToon'
PT-/TT-1618
PT-/TT-1820
PT-/TT-2022

General

21' 4-Pin Wire Harness Assembled w/ Protective Sleeve

The wiring is pulled through the trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Pin Male Connector. This item comes with a 3/8 20" Protective Sleeve and 30" Ground with 1/2" ring terminal.

MODEL: CFWH21

Used on

JBT-1600 ‘RIVER HAWK’

General

Phoenix Stamping Angle Swivel Bracket, Galvanized - 7/16″ Top Hole

These are used to mount bunk boards onto all Jon Boat, and PWT Trailer models.

This item is part of these kits:

- 1000B/1100B - Bunk Mounting Kit

- 1000G/1100G - Bunk Mounting Kit

- 2212B - Bunk Mounting Kit

- 2212G - Bunk Mounting Kit

- 2213B/2214B - Bunk Mounting Kit

- 2213G/2214G - Bunk Mounting Kit

- Jon Boat Trailer Bunk Mounting Kit

- Jon Boat Trailer Bow Support Mounting Kit

- Extended (EXT)/'River Hawk' Jon Boat Trailer Bunk Mounting Kit

MODEL: CFBRKTSWIVEL

MPN: PS-BB06G

Used on

PWT-1000B (Obsolete as of 2023)

PWT-1000G (Obsolete as of 2023)

PWT-2213B (Obsolete as of 2023)

PWT-2213G (Obsolete as of 2023)

General

Bow Stop and Winch Roller Bracket for Com-Fab (Steel) Marine Trailers, Galvanized

This item is part of the Winch Poly Bow Roller Assembly used on every type of winch stand for all Jon Boat and PWT trailer models. Fits with 1.5" x 3" tubing.

Dimensions: 2" x 3" x 8" w/ Hole 1.853" from Bottom

MODEL: CFBRKTWNCHRLR

Used on

PWT-1000B (Obsolete as of 2023)

General

3.06″ Wide Rubber Grommet for Steel E-Z Lube/SuperLube Grease Dust Cap

This item is used in conjunction with a 2" Dust Cap as part of both Hub Assemblies.

2″ Steel Super Lube Grease Dust Cap & Plug

Galvanized 5-Bolt Hub Assembly

Powder Coated Black 5-Bolt Hub Assembly

MODEL: CFAXLE-PLUG

MPN: Dexter 085-001-00 or TDE 46963

Used on

ALL COM-FAB TRAILER MODELS

General

12-Sided/Position Axle Cone Castle Nut, 1"-14 Thread

This item is fastened to the end of an Axle Spindle with the use of a 5/32" x 2" Zinc Plated Cotter Pin. This combination secures Hubs to all PWC Trailer Models. It is rated for axles less than 3000 lbs. It is a 1"-14 Thread 12-Slot Castle Nut to fit standard 1" trailer spindles.

MODEL: CFAXLE-NUT(CASTLE-L)

MPN: Dexter 006-10634 or TDE 10634

Used on

General

1-1/16" L44649 Tapered Axle Bearings

These bearings fit a 1-1/16" diameter Spindle Shaft, and are used with L44610 Bearing Cups. These are used on Tie-Down #1350, and #1750 Hubs

MODEL: CFAXLE-BRG(1-1/16")-INNER/OUTER

UNIVERSAL MODEL: L44649

MPN: TDE 11054 or Dexter 031-031-02

Used on

ALL COM-FAB PWC, JON BOAT, AND CANOE/KAYAK TRAILER MODELS

General

5/32" x 2" Cotter Pin, Zinc-Plated for Axle Spindle Hubs

It is used for fastening the Castle Nut to the Axle Spindle.

MODEL: CFAXLE-PIN(COTTER)

MPN: Dexter 019-10560

Used on

ALL COM-FAB TRAILER MODELS