PT-2426 Parts
Tall Galvanized Pontoon Boat Trailer Bunk Bracket Kit
$29.99
Brand Com-Fab
General
Tall Galvanized Pontoon Boat Trailer Bunk Bracket Kit
This kit is a segment of what is used to mount bunk boards to all Pontoon Boat Trailer frames.
Materials Include:
1 - Tall Galvanized Pontoon Boat Trailer Bunk Bracket
1 - 3/8″-16 x 2.06″ x 5.25″ Zinc U-Bolt
1 - 4" x 1" x .25" Galvanized Flat Plate w/ 1/2" Holes
2 - 3/8"-16 Flange Top Lock Nut, Zinc
4 - 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw
MODEL: CFBRKTPTBUNK(TALL)KIT
Used on
7000# Galvanized Tie Plate Kit for 2" Square Trailer Axle
$44.99
Brand Com-Fab
General
7000# Galvanized Tie Plate Kit for 2" Square Trailer Axle
This kit is used to mount springs to 2" Square Trailer Axles.
- It is a part of the 3500 lb Hydraulic Disc Brake Trailer Axle, used on Pontoon Boat Trailer models w/ Brakes.
- It is a part of the 2900 lb Idler Trailer Axle, used on Pontoon Boat Trailer models without Brakes.
Materials Include:
2 - 7000# Galvanized Tie Plate for 2" Square Axle Tubing
4 - 1/2"-13 x 2.06" x 4.31" Galvanized U-Bolt
8 - 1/2″-13 Galvanized Tri-Lock Nut
MODEL: CFAXLE-TIEPLATEKIT(7000-G)
Used on
Actuator Coupler Mounting Kit for 3" Wide Trailer Tongue
$9.99
Brand Com-Fab
General
Actuator Coupler Mounting Kit for 3" Wide Trailer Tongue
It is used to mount Actuators to all Pontoon Boat Trailer models w/ Brakes.
Materials Include:
3 - 1/2″-13 x 4″ Zinc Hex Head Cap Bolt
MODEL: CFCPLRNUT/BLT-KIT-3
Used on
Coupler Mounting Kit for 3" Wide Trailer Tongues
$7.99
Brand Com-Fab
General
Coupler Mounting Kit for 3" Wide Trailer Tongues
This item is used to mount Couplers to all trailer models without Brakes.
Materials Include:
2 - 1/2″-13 x 4″ Zinc Hex Head Cap Bolt
2 - 1/2″- 13 Zinc Top Lock Nut
MODEL: CFCPLR-MNTKIT(NONBRK)
Used on
ALL COM-FAB TRAILER MODELS
Pontoon Boat Trailer Tandem Axle Fender Mounting Kit
$29.99
Brand Com-Fab
General
Pontoon Boat Trailer Tandem Axle Fender Mounting Kit
This kit contains all of the requisite materials needed to mount a Tandem Axle Galvanized Pontoon Boat Trailer Fender onto all Tandem Axle Pontoon Boat Trailer models.
Materials Include:
4 – 3/8″-16 x 4.19″ x 3″ Galvanized U-Bolt
4 – 6" x 1.5" x 1.25" Galvanized Flat Plate
8 – 3/8″ Galvanized Tri-Lock Hex Nuts
MODEL: CFFNDRKIT-PTG(TA)
Used on
Galvanized Side Mount Spare Tire Carrier
$49.99 $45.75
Brand Com-Fab
General
Galvanized Side Mount Spare Tire Carrier
- This item is optional for all of our Galvanized Trailer models.
- It can accommodate wheels from 10" to 16.5" with a spare tire.
- It fits all 4 and 5 lug wheels with 4" and 4.5" diameter hole patterns.
- The galvanized finish provides long lasting protection.
- The item can mount to trailer frames up to 3" wide and 4" high.
*Used on Galvanized Trailer Models Only
TIEDOWN MODEL: #86098
MODEL: CFSTB-SIDE(G)
Installation Instructions
1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.
2. Slide U-bolt around the frame and through the holes in tire carrier.
3. Mount with flat washers, lock washers and nuts provided.
4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.
5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.
6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.
7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.
Optional for
ALL GALVANIZED TRAILER MODELS
Black Powder Coated Side Mount Spare Tire Carrier
$49.99 $35.00
Brand Com-Fab
General
Black Powder Coated Side Mount Spare Tire Carrier
- This item is optional for all of our Black Powder Coated Trailer models.
- It can accommodate wheels from 10" to 16.5" with a spare tire.
- It fits all 4 and 5 lug wheels with 4" and 4.5" diameter hole patterns.
- The powder coated finish provides long lasting protection.
- The item can mount to trailer frames up to 3" wide and 4" high.
*Used on Black Powder Coated Trailer Models Only
TIEDOWN MODEL: #86100
MODEL: CFSTB-SIDE(B)
Installation Instructions
1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.
2. Slide U-bolt around the frame and through the holes in tire carrier.
3. Mount with flat washers, lock washers and nuts provided.
4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.
5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.
6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.
7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.
Optional for
ALL BLACK POWDER COATED TRAILER MODELS
Side Crank Swivel Jack Mounting Kit for 1200/1500lb Jacks
$14.99
Brand Com-Fab
General
Side Crank Swivel Jack Mounting Kit
This kit contains all of the parts needed to mount the 1200 lb Side Crank Swivel Jack, as well as the 1500 lb Side Crank Swivel Jack to all trailer frame models
MODEL: CFJACK-MNTKIT
Used on
ALL COM-FAB TRAILER MODELS