PWT-2213B Parts

General

3/8″-16 x 1″ Zinc Hex Head Cap Bolt

This item is used with 3/8"-16 Serrated Zinc Flange Nuts to mount all crank winch models onto every type of winch post. It is also part of the 2213B - Bunk Mounting Kit used to mount bunks onto PWT-2213B, and PWT-2214B trailer models. 

MODEL: CFBLT3/8X1Z

Used on

ALL COM-FAB TRAILER MODELS

2″ x 8″ x 10′ Black Marine Carpeted Center Walk Board

This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340 

This item is used for all PWT-2213 trailer models. It is mounted to the center of the trailer frame with six 5/8″-16 x 1-1/2″ Galvanized Hex Head Lag Screws.

MODEL: CFWALKBRDC-10FT

Used on

General

8.25" x1.5" x .25" Zinc Flat Plate w/ 7/16" Holes and a 3.5" Hole Center - Shackle Link

This item is part of the CFBNKKIT-PWT(DBL-PC) used to mount Bunk Boards onto 2213B, and 2214B trailer models.

MODEL: CFFLTSTRPBUNK(DBL)Z

Used on

General

32″ Black Powder Coated Winch Post (Smooth High Gloss Bengal)

This item is part of the 32″ Black Powder Coated Winch Assembly (Smooth High Gloss Bengal) w/ DL 600LB Winch that mounts to the PWT-2213B (Obsolete since 2023), and PWT-2214B trailer models with Zinc U Bolt Winch Assembly for Black Powder Coated Trailers.

MODEL: CFWNCHPOST(PWC-32)-B (BENGAL)

Used on

General

3/8″-16 x 3.06" x 4.5″ Zinc U-Bolt

This item is part of the Black Powder Coated Winch Assembly Mounting Kit used to mount all Black Powder Coated Winch Assemblies to all Black Powder Coated PWT trailer models.

MODEL: CFUBLT3/8x3.06x4.5Z

MPN: TDE 83364Z

Used on

General

3″ Amber Poly Bow Roller Bell End

This item is used as part of every Winch Assembly mounted on every PWT, and Jon Boat Trailer model.

This item is part of these assemblies:

- 3" Poly Bow Roller Assembly

- Winch Poly Bow Roller Assembly

MODEL: CFPOLYEBELL-3

MPN: TDE 48654

Used on

General

3″ Amber Poly Bow Roller 

This item is used as part of every Winch Assembly mounted on every PWT, and Jon Boat Trailer model.

This item is part of these assemblies:

- 3" Poly Bow Roller Assembly

- Winch Poly Bow Roller Assembly

MODEL: CFPOLYBOWRLR-3

MPN: TDE 48653

Used on:

General

3/8″-16 x 4.19″ x 3″ Zinc U-Bolt

This item is part of the 2213B - Fender Mounting Kit used to mount fenders to PWT-2213B, and PWT-2214B trailer models.

MODEL: CFUBLT3/8x4.19x3.00Z

MPN: TDE 83363Z

Used on

General

TecNiq-T86-L 8 Function 8" Box Driver Side Tail Light w/ Pig Tail.

• Multi-Function 6" box tail light
• Urethane Potting w/ Guaranteed Circuit Board Protection
• Dust and water proof with hermetic seal
• Durable impact resistant lens
• Meets all FMVSS 108 requirements for narrow and wide vehicles
• Reliable performance over 100,000 hours
• Fits standard mounting as a direct replacement
• Functions include: Stop, Turn, Tail, Clearance, Side marker, Side Reflector,
  Rear Reflector, and License Plate Light (Left)

Includes two 7/16" bolts w/ nuts for mounting.

MODEL: CFLIGHTREAR(L)-LED(TEC)

MPN: T86-RR2LG-1

Used on

ALL COM-FAB TRAILER MODELS

General

Galvanized Side Mount Spare Tire Carrier

• This item is optional for all of our Galvanized Trailer models.
• It can accommodate wheels from 10" to 16.5" with a spare tire.
• It fits all 4 and 5 lug wheels with 4" and 4.5" diameter hole patterns.
• The galvanized finish provides long lasting protection.
• The item can mount to trailer frames up to 3" wide and 4" high. 

*Used on Galvanized Trailer Models Only

TIEDOWN MODEL: #86098

MODEL: CFSTB-SIDE(G)

Installation Instructions

1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.

2. Slide U-bolt around the frame and through the holes in tire carrier.

3. Mount with flat washers, lock washers and nuts provided.

4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.

5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.

6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.

7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.

Optional for

ALL GALVANIZED TRAILER MODELS

General

3/16" S-Hook with Latch Trailer Safety Chain - 48"

48" 3500 LB Safety Chain with 3/16 in S-Hooks and Latch

MODEL: CFSFTYCHN-3.5K

MPN: SC31648

Used On

General

1 Inch Flat Spindle Washer - "ID" Washer

This item is used to help secure Hubs to Axle Spindles on all of our JBT, PWT & KCT Models. It is placed in between the 12 Position Castle Nut w/Cotter Pin and the hub's outer-facing bearing in the Hub Assembly on the Axle Spindle. 

12 Position Castle Nut

5/32" x 2" Zinc Cotter Pin for Axle Spindle

Axle Spindle

Galvanized 5-Bolt Hub Assembly

Black Powder Coated 5-Bolt Hub Assembly

MODEL: CFAXLE-WSHR(SPINDLE)

MPN: 005-10520

Used on

ALL COM-FAB TRAILER MODELS

General

Smooth Gloss Bengal Black Spray Paint

This item is used to touch up all of our Black Powder Coated Trailers, Fenders, and Winch Assemblies for sale. It is specifically designed for our trailers, and is an exact match finish. The instructions for use are clearly labeled on the back of the can.

Specifications

Net Weight: 4.5oz/128g

Exact Match Finish - Industrial. Product Contains less than 88% VOC/2.05 MIR

Contains: Acetone and Petroleum Distillate

DANGER! EXTREMELY FLAMMABLE LIQUID AND VAPOR.

VAPORS MAY CAUSE FLASH FIRE.

CONTENTS UNDER PRESSURE.

VAPOR HARMFUL. MAY AFFECT THE BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA. CAUSES EYE, SKIN, AND NOSE IRRITATION. 

NOTICE: Reports have associated repeated, and prolonged occupational overexposure to solvents with permanent brain, and nervous system damage. Intentional misuse by deliberately concentrating, and inhaling the contents may be harmful or fatal. WARNING! This product contains a chemical known to the state to California to cause cancer and birth defects or other reproductive harm. Do not puncture or incinerate (burn) container. Exposure to heat or prolonged exposure to sun may cause bursting. Do not expose to heat or store at temperatures above 120 Degrees Fahrenheit. Vapors may ignite explosively. Keep away from heat, sparks, and flame. Do not smoke. Extinguish all flames and pilot lights and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent buildup of vapors by opening all windows and doors to achieve cross-ventilation. Use only with adequate ventilation. Do not breathe dust, vapors, or spray mist. To avoid breathing vapors or spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air or wear respiratory protection (NIOSH/MSHA approved) or leave the area. Close container after each use. Avoid contact with eyes, skin, and clothing. First Aid: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention; for skin, wash thoroughly with soap and water.

Instructions

PREPARATION: Surface should be clean, dry, and free of wax, oil, rust, loose paint, etc. WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

SHAKE CAN WELL BEFORE USING TO SPRAY: Hold 10 to 12 Inches from surface. Press valve down completely, moving spray. Allow paint to become tacky between coats. Light mist coats prevent runs or sags.

TO CLEAN VALVE: Invert can, press spray tip until a short spurt of clear gas escapes. Spray tip may be removed for cleaning, if necessary. Clean with a common pin and paint thinner.

KEEP OUT OF THE REACH OF CHILDREN.

General

Smooth Gloss Bengal Black Touch Up Pen

This item is used to touch up all of our Black Powder Coated Trailers, Fenders, and Winch Assemblies for sale. It is specifically designed for our trailers, and is an exact match finish. The instructions for use are clearly labeled on the back of the pen.

Specifications

Net Weight: 3.5 oz/9 ml

Exact Match Finish - Industrial. Product Contains less than 88% VOC/2.05 MIR

Contains: Acetone, Xylene, Toluene, and Petroleum Distillates.

DANGER! EXTREMELY FLAMMABLE LIQUID AND VAPOR.

VAPORS MAY CAUSE FLASH FIRE.

VAPOR HARMFUL. MAY AFFECT THE BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA. CAUSES EYE, SKIN, AND NOSE IRRITATION. 

NOTICE: Reports have associated repeated, and prolonged occupational overexposure to solvents with permanent brain, and nervous system damage. Intentional misuse by deliberately concentrating, and inhaling the contents may be harmful or fatal. WARNING! This product contains a chemical known to the state to California to cause cancer and birth defects or other reproductive harm. Do not puncture or incinerate (burn) container. Exposure to heat or prolonged exposure to sun may cause bursting. Do not expose to heat or store at temperatures above 120 Degrees Fahrenheit. Vapors may ignite explosively. Keep away from heat, sparks, and flame. Do not smoke. Extinguish all flames and pilot lights and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent buildup of vapors by opening all windows and doors to achieve cross-ventilation. Use only with adequate ventilation. Do not breathe dust, vapors, or spray mist. To avoid breathing vapors or spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air or wear respiratory protection (NIOSH/MSHA approved) or leave the area. Close container after each use. Avoid contact with eyes, skin, and clothing. First Aid: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention; for skin, wash thoroughly with soap and water.

Instructions

PREPARATION: Surface should be clean, dry, and free of wax, oil, rust, loose paint, etc. WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

DIRECTIONS: Shake well to get best color match. 

KEEP OUT OF THE REACH OF CHILDREN.

• Comes with a 1/4" Nut.
• Brilliant illumination in a compact size
• IP 68 Rated - Dust and water proof
• TecSeal Urethane Potting - Guaranteed Circuit Board Protection
• Stud-mounted, no visible fasteners
• Reliable performance over 100,000 hours
• Vertical mount positions meets P2 specifications, while horizontal mount meets PC specifications 

MODEL: CFLIGHTSDMRKR-LED(TEC-R24)

MPN: S14-RRS1-1

Used on 

General

TecNiq Red LED V-Shaped Light Bar w/ 58" Lead

• Used on all Double PWT Trailer models.
• Screws included with purchase
• Fully submersible LED Identification bar
• TecSeal Urethane Potting - Guaranteed Circuit Board Protection
• Durable impact resistant lens
• Available in colored or clear impact resistant lens
• IP68 rating while exceeding FMVSS 108 standards
• Reliable performance over 100,000 hours

MODEL: CFLIGHTBAR-LED(V-TEC)

MPN: S52-RR1G-1

Used On

General

Black Powder Coated Side Mount Spare Tire Carrier

• This item is optional for all of our Black Powder Coated Trailer models.
• It can accommodate wheels from 10" to 16.5" with a spare tire.
• It fits all 4 and 5 lug wheels with 4" and 4.5" diameter hole patterns.
• The powder coated finish provides long lasting protection.
• The item can mount to trailer frames up to 3" wide and 4" high.
  

*Used on Black Powder Coated Trailer Models Only

TIEDOWN MODEL: #86100

MODEL: CFSTB-SIDE(B)

Installation Instructions

1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.

2. Slide U-bolt around the frame and through the holes in tire carrier.

3. Mount with flat washers, lock washers and nuts provided.

4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.

5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.

6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.

7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.

Optional for

ALL BLACK POWDER COATED TRAILER MODELS

General

10 ft Walk Board Black Marine Carpet

Protective carpeting for the 2″ x 8″ x 10′ Black Marine Carpeted Center Walk Board used on all of our Double PWC Trailer Models.

11 ft by 14.4 in to fully cover the walk board

Used on

General

Triple Lip Grease Seal - 1.25" I.D. - 1.98"

This seal is part of our Galvanized 5-Bolt Hub Assembly, and our Black Powder Coated 5-Bolt Hub Assembly. This rubber coated seal fits Tiedown Bearings 44643, and 44649

MODEL: CFAXLE-SEAL(TRIPLE-1.25)

MPN: 1252555UC or Dexter 010-11084

Used on

1-1/16" L44610 Tapered Axle Bearing Cup/Race. 1.98" OD. For Use w/ 1350LB Hubs.

To Be Used w/ L44649 Cone Bearings.

MPN: TDE 11055 or Dexter 031-031-01

General

ST175/80R13 13" D Load Range 545 Hole Pattern T07/BM Black Machined V-Spoke Aluminum Radial Tire & Wheel - Kenda/Loadstar, 65 psi

This item is an upgradable option for all Trailer Models with 13" Tires. Speed rating is 81 mph.

MODEL: CFTST175RLRD-VSPOKE

Upgrade for

General

10 ft Walk Board Black Marine Carpet

Protective carpeting for the 2″ x 8″ x 10′ Black Marine Carpeted Center Walk Board used on all of our Double PWC Trailer Models.

$2.25/ft in 100 ft rolls

If you are purchasing this carpet it needs to be a foot longer than the board itself.

Used on

General

RAM 1500LB Side Crank Swivel Jack

• RAM swivel marine tongue jack for boat and other trailer applications
• 1,500 lb. capacity
• 24-3/4" maximum tongue height
• Side wind handle with extra heavy screw drive and ergonomic handle grip
• Heavy duty polypropylene 8" diameter slotted wheel resists flat spots and cold weather cracking
• Zinc plated finish for additional rust resistance and longer life
• Easily swivels up for towing or down for stowing and locks in place in either position
• Reinforced wheel bracket for additional strength
• Includes all necessary bolt-on mounting hardware
  

MODEL: CFJACKSIDE-1500(RAM)

Used On

PT-/TT-2224
PT-/TT-2426