PWT-2212B Parts

General

1-1/16" L44649 Tapered Axle Bearings

These bearings fit a 1-1/16" diameter Spindle Shaft, and are used with L44610 Bearing Cups. These are used on Tie-Down #1350, and #1750 Hubs

MODEL: CFAXLE-BRG(1-1/16")-INNER/OUTER

UNIVERSAL MODEL: L44649

MPN: TDE 11054 or Dexter 031-031-02

Used on

ALL COM-FAB PWC, JON BOAT, AND CANOE/KAYAK TRAILER MODELS

General

Side Crank Swivel Jack Mounting Kit

This kit contains all of the  parts needed to mount the 1200 lb Side Crank Swivel Jack, as well as the 1500 lb Side Crank Swivel Jack to all trailer frame models

MODEL: CFJACK-MNTKIT

Used on

ALL COM-FAB TRAILER MODELS

General

3/8″-16 x 3.06" x 2.38″ Zinc U-Bolt

This item is part of these kits:

- 2213B/2214B - Bunk Mounting Kit

- 2212B - Bunk Mounting Kit

- 2212B - Fender Mounting Kit

MODEL: CFUBLT3/8x3.06x2.38Z

MPN: TDE 83027Z

Used on

General

1/2″-20 Lug Nut (Set of 5)

These are used for mounting tires on all trailer models to 1 1/2"-20 Threaded Stud.

MODEL: CFNUTLUG

Used on

ALL COM-FAB TRAILER MODELS WITH SILVER E-COAT OR GALVANIZED WHEELS

General

- Two of these are used with 1/4″ Zinc Nuts to mount TecNiq 8 Function 6" LED Tail Lights & TecNiq 7 Function 6" LED Tail Lights to all current Com-Fab Trailer Models

- Two of these are used with 1/4″ Zinc Nuts to mount Dry Launch Submersible Tail Lights to Pre-2018 Com-Fab trailer models.

MODEL: CFBLTLIGHT

Used On

ALL COM-FAB TRAILER MODELS

General

2  x 4 x 5′ Black Marine Carpeted Bunk Board

These are used for PWT-800, and PWT-2212 trailer models.

Single PWC Zinc Bunk Mounting Kit

Single PWC Galvanized Bunk Mounting Kit

2212B - Bunk Mounting Kit

2212G - Bunk Mounting Kit

MODEL: CFBUNKBRDC-5FT

Used on

General

Black Powder Coated Axle Mounting Kit

This kit is used to mount Black Powder Coated Axles to Black Powder Coated PWT Trailer models.

Materials Include: 

2 - 1/2" x 3" Zinc Hex Head Bolt

2 - 1/2"-13 Zinc Flange Top Lock Nut

MODEL: CFAXLEKIT-MOUNT(Z)

Used on

General

Company Graphic for Single PWT and Jon Boat Trailers

This graphic sticks to the side of all Single PWT, Jon Boat, and PWT-2212 trailer models with Sides of 3" tall Tubing. 

Dimensions: 19.75" x 2"

MODEL: CFGRAPHIC-(3X1.5)

Used on

General

Coupler Mounting Kit for 3" Wide Trailer Tongues

This item is used to mount Couplers to all trailer models without Brakes.

Materials Include: 

2 - 1/2″-13 x 4″ Zinc Hex Head Cap Bolt

2 - 1/2″- 13 Zinc Top Lock Nut

MODEL: CFCPLR-MNTKIT(NONBRK)

Used on

ALL COM-FAB TRAILER MODELS

General

Black Marine Carpet 10.25" Width

$2/ft in 100 ft rolls

- This carpet is used for bunks on all of our PWC Trailer, and Jon Boat Trailer models. It is optional for our Pontoon Trailer models and Canoe/Kayak Angler Kits.

If you are purchasing this carpet it needs to be a foot longer than the board itself.

This carpet comes in these specific sizes as well:

- 5 ft Bunk Board Black Marine Carpet

- 6 ft Bunk Board Black Marine Carpet

- 7 ft Bunk Board Black Marine Carpet

MODEL: CFBNKCOVER-CARPET(10.25)

Used on

Optional for

c-General

3/8"-16 Thread Nylock Nut, Zinc-Plated

This item is part of the Zinc Tie Plate Kit used to mount 2-Leaf Slipper Springs (550 lb), and 3-Leaf Slipper Springs (750 lb) to 1.5" Square Axle Tubing.

MODEL: CFAXLE-NUT(3/8NYLOCK-Z)

Used on

General

3/8"-16 x 1.56" x 3.63" U-Bolt, Zinc-Plated - For Standard 1.5" SQ Tubing Axles

This item is part of the Zinc Axle Tie Plate Kit used to mount 2-Leaf Slipper Springs (550 lb), and 3-Leaf Slipper Springs (750 lb) to 1.5" Square Axle Tubing.

MODEL: CFAXLE-UBLT(1.5SQ-Z)

MPN: TDE 83002-1Z

Used on

General

3/8"-16 x 1.56" x 3.63" U-Bolt, Galvanized - For Standard 1.5" SQ Tubing Axles

This item is part of the Galvanized Tie Plate Kit used to mount 3-Leaf Slipper Springs to Galvanized 1.5" Square Axle Tubing.

MODEL: CFAXLE-UBLT(1.5SQ-G)

MPN: TDE 83002G

Used on

General

3/8" Galvanized Split Lock Washer

These are part of the Galvanized Tie Plate Kit used to mount 3-Leaf Slipper Springs to Galvanized 1.5" Square Axle Tubing.

MODEL: CFAXLE-WSHRL(LSPRNG)

Used on

General

Axle Tie Plate, Galvanized for 1.5" Square Tubing Trailer Axles (up to 2000lb Axles)

This item is part of the Galvanized Axle Tie Plate Kit used to mount 3-Leaf Slipper Springs to 1500 lb Galvanized Trailer Axles, and to 1500 lb Extended Galvanized Trailer Axles.

TIE DOWN MODEL: #44556G

MODEL: CFAXLE-TIEPLATE(3-G)

MPN: TDE 44556G or Dexter 012-44556

Specifications

Axle Size: 1-1/2" Square Axle

U-Bolt Size: 3/8"-16 x 1.56 x 3.63

Dimensions: 3" x 3" x 3/16"

Tube Width: 2"

Spring Width: 1-3/4"

Hole Diameter: 7/16"

U-Bolt Finish: Galvanized

Plate Finish: Galvanized

Used on

General

3" Poly Bow Roller Assembly

This is a section of the Winch Poly Bow Roller Assembly.

Materials Include:

1 – 3″ Poly Bow Roller 
2 – 3″ Poly Bow Roller Bell End
1 – 1/2″-13 x 4.5″ Zinc Bolt
2 – 1/2″ Zinc Flat Washer
1 – 1/2″-13 Top Lock Nut

MODEL: CFASSM-POLYRLR(3)

Used on

General

Double (Lightweight) PWC Trailer Fender Mounting Kit, Zinc-Plated - PWT-2212B Model

These are all of the requisite materials to mount a Black Powder Coated Fender 4.80 x 12" Tire onto a 2212B trailer model.

Materials Include:

4 – 3/8″ Zinc Hex Flange Top Lock Nut

MODEL: CFFNDRKIT-2212B (OBS)

Used on

PWT-2212B (Pre-April 2024)

General

Double (Lightweight) PWC Trailer Bunk Mounting Kit, Zinc-Plated - PWT-2212B Models

These are all of the requisite materials needed to mount a 2″ x 4″ x 5′ Black Marine Carpeted Bunk Board onto a 2212B trailer model. 

Materials Include:

4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw

MODEL: CFBNKKIT-PWT(DBL-LTWT-PC)

Used on

PWT-2212B

General

1/4″-20 Thread External Tooth Locknut, Zinc Nut for Tail Lights

- Two of these are used with 1/4″- 20 Tail Light Bolts to mount TecNiq 8 Function 6" LED Tail Lights to all current Com-Fab Trailer models.

- Two of these are used with 1/4″- 20 Tail Light Bolts to mount Dry Launch SP7 Red Tail Lights to all Pre-2018 Com-Fab trailer models.

- One of these is used w/ 2-3/4"-20 Thread Bolts to secure PWT winch strap to crank winch.

MODEL: CFNUT1/4LOCKZ

Used on

ALL COM-FAB TRAILER MODELS

General

3/8″-16 Serrated Zinc Flange Nut

This item is part of these kits:

- 3/8"-16 Zinc Hex Head Bolts to mount all Crank Winch Models onto all Winch Post models.

- Black Powder Coated Winch Assembly Mounting Kit

- Jon Boat Trailer Winch Assembly Mounting Kit

MODEL: CFNUT3/8SERTDZ

Used on

ALL Powder Coat Finish Trailer Models, and Most Galvanized Trailer Models for Winches

General

5"x 1.25" x .25" Zinc Flat Plate w/ 2 9/16" Holes and 3.5" Hole Centers

This item is part of these kits:

- Black Powder Coated Winch Assembly Mounting Kit

- 2212B - Fender Mounting Kit (pre-April 2024 Models)

- 2212B - Bunk Mounting Kit.

MODEL: CFFLTSTRPWNCHZ

Used on

General

3/8″-16 x 1″ Zinc Hex Head Cap Bolt

This item is used with 3/8"-16 Serrated Zinc Flange Nuts to mount all crank winch models onto every type of winch post. It is also part of the 2213B - Bunk Mounting Kit used to mount bunks onto PWT-2213B, and PWT-2214B trailer models. 

MODEL: CFBLT3/8X1Z

Used on

ALL COM-FAB TRAILER MODELS

General

3″ Amber Poly Bow Roller Bell End

This item is used as part of every Winch Assembly mounted on every PWT, and Jon Boat Trailer model.

This item is part of these assemblies:

- 3" Poly Bow Roller Assembly

- Winch Poly Bow Roller Assembly

MODEL: CFPOLYEBELL-3

MPN: TDE 48654

Used on

General

3″ Amber Poly Bow Roller 

This item is used as part of every Winch Assembly mounted on every PWT, and Jon Boat Trailer model.

This item is part of these assemblies:

- 3" Poly Bow Roller Assembly

- Winch Poly Bow Roller Assembly

MODEL: CFPOLYBOWRLR-3

MPN: TDE 48653

Used on: