Parts
Replacement lights, tongue jacks, couplers, winches, brakes and other parts to keep your trailer working. Low prices on parts and shipping!
Try our Part Selector to find the right part for your trailer!
1-1/16" L44610 Axle Bearing Cup
$7.99
Brand Com-Fab Trailers
Lug Nut Stud 1-1/2"-20
$4.99 $2.25
Brand Com-Fab
General
1-1/2"-20 Lug Nut Stud
The stud material is SAE grade 8, zinc dichromate plated, with a minimum 96 hour salt spray requirement.
MODEL: CFAXLE-BLT(STUD1-1/2)
Used For
ALL COM-FAB TRAILER MODELS
1/2"-20 Long Chrome Acorn Lug Nut (Set of 5)
$16.25
Brand Com-Fab
General
1/2"-20 Long Chrome Acorn Lug Nut (Set of 5)
These are used on 1 1/2-20" Threaded Studs with a Long Stainless Steel Cap for T09/BM V-Spoke Rim on an ST175/80R13 D Load Range 13" Aluminum Tire and Wheel, but is optional for all trailer models.
MODEL: CFAXLE-NUT(LUG-CHROME)
Optional for
ALL COMFAB TRAILER MODELS
20′ Winch Strap w/ 1" Hook (4000 lb Max Capacity) - Dutton-Lainson
$27.50
Brand Com-Fab
General
20′ Winch Strap w/ Hook (4000 lb Max Capacity)
- Dutton-Lainson black heavy duty winch strap and hook
- For winches up to 2,600 lb. capacity
- 2" wide x 20' long
- 4,000 lb. breaking strength
- Snap Hook has a tensile strength of 7,500 lbs.
- Includes a 3/8" x 3" bolt, a 3/8" x 3-1/4" bolt, and a 3/8" locknut to install strap onto winch drum
MODEL: CFWNCHSTRAP-20FT(4K-DL)
Used on
PT-16182500 lb Black Powder Coated PWC Trailer Axle w/ 545 Hubs and Springs HF 93.5 SC 83.5
$355.00
Brand Com-Fab
General
2500 lb Black Powder Coated PWC Trailer Axle w/ 545 Hubs and Springs
*This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340*
*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*
Materials Include:
1 - 83" x 2" x 2" x 3/16" Gauge Black Powder Coated Axle Tubing
2 - Black Powder Coated 5-Bolt Hub Assembly
2 - 5-Leaf Slipper Springs (1,250 lb)
1 - BATIE190Z Zinc Tie Plate Kit
This item is mounted to the PWT-2213B, and PWT-2214B trailer models with a Black Powder Coated Axle Mounting Kit.
MODEL: CFAXLE2500B
Specifications
Tubing: 2" Black Powder Coated Square Axle
Load Rating: 2500 lb
Hub Face: 93.5"
Spring Center: 83"
Overall Length: 98.5"
Bearing Size: 1-1/16"
Used on
13″ Black Machined V-Spoke Aluminum Tire & Wheel ST175/80R13 D Load Range
$235.00
Brand Com-Fab
General
ST175/80R13 D Load Range 13″ Aluminum Tire & Wheel 65 psi
This item is an upgradable option for all Trailer Models with 13" Tires. Speed rating is 81 mph.
MODEL: CFTST175RLRD-VSPOKE
Upgrade for
Jon Boat Trailer Fender Mounting Kit
$14.99
Brand Com-Fab
General
Jon Boat Trailer Fender Mounting Kit
These are all of the requisite materials needed to mount a Galvanized Fender 4.80 x 12” Tire onto every Jon Boat Trailer model.
Materials Include:
2 – 3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt
2 – 5" x 1.25" x .35" Galvanized Flat Plate
4 – 3/8" Galvanized Flat Washer
4 – 3/8" Galvanized Tri-Lock Nut
MODEL: CFFNDRKIT-JBT
Used on
Small Galvanized Pontoon Bunk Bracket #44012
$25.00
Brand Com-Fab
General
Small Galvanized Pontoon Bunk Bracket #44012
This item is is used for:
– Mounting 2″ x 4″ or 2″ x 6″ Bunk Boards on Minitoon Trailer Frames
– Mounting 2″ x 4″ or 2″ x 6″ Center Bunk Boards on Select Tritoon Trailer Frames*
*Some boats may have deeper center toons than outside toons.
TIE DOWN MODEL: #44012
MODEL: CFBRKTPTBUNK(SMALL)
Used on
PT-1400
Dutton-Lainson 600 lb Winch Handle
$16.99
Brand Com-Fab
General
Dutton-Lainson 600 lb Winch Handle
This ergonomic handle attaches to a Dutton-Lainson 600 lb Capacity Crank Winch with 1/2" Nylock Nut.
DUTTON-LAINSON MODEL: #70304
MODEL: CFWNCHHANDLE-DL600
Used on
3/8″-16 x 3.06" x 4.5″ Galvanized U-Bolt
$3.99
Brand Com-Fab
General
3/8″-16 x 3.06" x 4.5″ Galvanized U-Bolt
This item is part of these kits:
- Galvanized Winch Assembly Mounting Kit
- Jon Boat Trailer Bow Support Bunk Mounting Kit
MODEL: CFUBLT3/8X4.5G
Used on
Pre-2020 2212B - Black Powder Coated Fender
$74.99
Brand Com-Fab
General
2212B - Black Powder Coated Fender
This fender is mounted onto a Pre-2020 PWT-2212B trailer with a 2212B - Fender Mounting Kit, and fits a 4.80 x 12″ B Load Range Silver Tire & Wheel.
MODEL: CFFNDR2212B
Used on
PWT-2212B
5.70 x 8″ C Load Range Galvanized Tire & Wheel, Bias
$69.99
Brand Com-Fab
General
5.70 x 8″ C Load Range Galvanized Finish Tire & Wheel, Bias
This tire and wheel is optional on the PWT-800G, PWT-1000G, PWT-1100G, and all Jon Boat Trailer models. Speed rating 65 mph.
MODEL: CFT5708G
Optional on
Jon Boat Trailer Winch Assembly Mounting Kit
$19.99
Brand Com-Fab
General
Jon Boat Trailer Winch Assembly Mounting Kit
This kit contains all of the requisite materials needed to mount a 32" Galvanized Winch Assembly w/DL 600 onto all Jon Boat Trailer models.
Materials Include:
2 – 3/8″ x 3.06" x 5.25″ Zinc U-Bolt
2 – 5" x 1.25" x .25" Galvanized Flat Plate
4 – 3/8″-16 Serrated Zinc Flange Nuts
MODEL: CFWNCHKIT-(JBT)
Used on
8.25" x 1.5" x .25" Galvanized Flat Plate w/ 7/16" Holes - Shackle Link
$6.99
Brand Com-Fab
General
8.25" x 1.5" x .25" Galvanized Flat Plate w/ 7/16" Holes and 3.5" Hole Centers - Shackle Link
This item is part of the 2213G - Bunk Board Mounting Kit used to mount Bunk Boards onto PWT-2213G, and PWT-2214G trailer models.
MODEL: CFFLTSTRPBUNK(DBL)G
Used on
8″ Galvanized Adjustable Bolster Bunk Bracket
$7.99 $4.50
Brand Com-Fab
General
8″ Galvanized Adjustable Bolster Bunk Bracket
This item is part of these kits:
- Jon Boat Trailer Bunk Mounting Kit
- Jon Boat Trailer Bow Support Mounting Kit
- 'River Hawk' Jon Boat Trailer Bunk Mounting Kit
TIE DOWN MODEL: 86130G
MODEL: CFBRKTBLSTR
Used on
6600 lb Capacity Hydraulic Disc Brake Actuator w/ 2" Coupler - Dexter
$299.99 $215.99
Brand Com-Fab
General
Model 66 6600 lb GVWR Capacity Hydraulic Disc Brake Actuator; 660 lb Tongue Load; 2″ Coupler (Includes Disc Brake Solenoid) - Dexter
This item is used with Hydraulic Disc Brake Setups on every Pontoon Boat Trailer model with Disc Brakes.This item is mounted to Pontoon Boat Trailer models with an Actuator Mounting Kit
MODEL: CFCPLR-BRAKE(DISC-660)
Used on
M10 Copper Banjo Brake Fitting Washer
$1.49
Brand Com-Fab
General
Copper Banjo Brake Fitting Washer
This item is used in conjunction with 64" Grey Flex Hose Banjo-Banjo Brake Lines, Brass Banjo Fitting Bolts, and Black O-Rings to connect Aluminum E-Coat Caliber Assemblies on all tandem axle pontoon trailer models.
For use with:
– 64″ Grey Flex Hose Banjo-Banjo Brake Lines
– Brass Banjo Fitting Bolts
– Black O-Rings
MODEL: CFBRKE-WSHRBANJO
Used on
Brass Banjo Fitting Bolt for (Round) Banjo-fitted Brake Lines
$4.99
Brand Com-Fab
General
Brass Banjo Fitting Bolt for (Round) Banjo-fitted Brake Lines
This item is used in conjunction with 64" Grey Flex Banjo-Banjo Brake Lines, O-Rings and Copper Banjo Fitting Washers to connect Aluminum E-Coat Caliber Assemblies on all tandem axle pontoon trailer models.
For use with:
MODEL: CFBRKE-BLTBANJO(RD)
Used on
14″ Galvanized Tire & Wheel ST205/75R14 D Load Range
$165.00
Brand Com-Fab
General
Karrier ST205/75R14 D Load Range 14″ Galvanized Tire & Wheel 65 psi
This item is used on our PT-2628 Trailer Models, but is also an upgradable option for all Pontoon Trailer Models. Speed rating is 81 mph.
MODEL: CFT175DLRD-G
Used on
Upgrade for
Smooth Gloss Bengal Black Spray Paint
$15.99
Brand Com-Fab
General
Smooth Gloss Bengal Black Spray Paint
This item is used to touch up all of our Black Powder Coated Trailers, Fenders, and Winch Assemblies for sale. It is specifically designed for our trailers, and is an exact match finish. The instructions for use are clearly labeled on the back of the can.
Specifications
Net Weight: 4.5oz/128g
Exact Match Finish - Industrial. Product Contains less than 88% VOC/2.05 MIR
Contains: Acetone and Petroleum Distillate
DANGER! EXTREMELY FLAMMABLE LIQUID AND VAPOR.
VAPORS MAY CAUSE FLASH FIRE.
CONTENTS UNDER PRESSURE.
VAPOR HARMFUL. MAY AFFECT THE BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA. CAUSES EYE, SKIN, AND NOSE IRRITATION.
NOTICE: Reports have associated repeated, and prolonged occupational overexposure to solvents with permanent brain, and nervous system damage. Intentional misuse by deliberately concentrating, and inhaling the contents may be harmful or fatal. WARNING! This product contains a chemical known to the state to California to cause cancer and birth defects or other reproductive harm. Do not puncture or incinerate (burn) container. Exposure to heat or prolonged exposure to sun may cause bursting. Do not expose to heat or store at temperatures above 120 Degrees Fahrenheit. Vapors may ignite explosively. Keep away from heat, sparks, and flame. Do not smoke. Extinguish all flames and pilot lights and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent buildup of vapors by opening all windows and doors to achieve cross-ventilation. Use only with adequate ventilation. Do not breathe dust, vapors, or spray mist. To avoid breathing vapors or spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air or wear respiratory protection (NIOSH/MSHA approved) or leave the area. Close container after each use. Avoid contact with eyes, skin, and clothing. First Aid: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention; for skin, wash thoroughly with soap and water.
Instructions
PREPARATION: Surface should be clean, dry, and free of wax, oil, rust, loose paint, etc. WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
SHAKE CAN WELL BEFORE USING TO SPRAY: Hold 10 to 12 Inches from surface. Press valve down completely, moving spray. Allow paint to become tacky between coats. Light mist coats prevent runs or sags.
TO CLEAN VALVE: Invert can, press spray tip until a short spurt of clear gas escapes. Spray tip may be removed for cleaning, if necessary. Clean with a common pin and paint thinner.
KEEP OUT OF THE REACH OF CHILDREN.
Heavy Duty Pontoon Bunk Bracket #43747
$35.00
Brand Com-Fab
General
Heavy Duty Pontoon Bunk Bracket #43747
This item is optional for all Pontoon Boat Trailer models. It fits 2' x 4' and 2' x 6' boards.
TIE DOWN MODEL: #43747
MODEL: CFBRKTPTBUNK(HVY)
Specifications
Length: 15.4"
Base Length: 13.13"
Width: 3"
Height: 6.07"
Optional for
Flat Pontoon Bunk Bracket #44879
$29.99
Brand Com-Fab
General
Flat Pontoon Bunk Bracket #44879
This bunk bracket is optional for all Pontoon Boat Trailer models.
TIE DOWN MODEL: #44879
MODEL: CFBRKTPTBUNK(FLAT-TALL)
Specifications
Length: 9.02"
Base Length: 8.38"
Width: 3"
Height: 5.25"
Optional for
Side Crank Swivel Jack Mounting Kit for 1200/1500lb Jacks
$14.99
Brand Com-Fab
General
Side Crank Swivel Jack Mounting Kit
This kit contains all of the parts needed to mount the 1200 lb Side Crank Swivel Jack, as well as the 1500 lb Side Crank Swivel Jack to all trailer frame models
MODEL: CFJACK-MNTKIT
Used on
ALL COM-FAB TRAILER MODELS
3/8″-16 x 3.06" x 2.38″ Zinc U-Bolt
$5.99
Brand Com-Fab
General
3/8″-16 x 3.06" x 2.38″ Zinc U-Bolt
This item is part of these kits:
TIEDOWN: 83027Z
MODEL: CFUBLT3/8X2.38Z