Canoe and Kayak Trailer Kits
A Smart Option for All Enthusiasts
Our newest line of products feature a variety of setup options for converting existing trailers into canoe and kayak trailers! Most personal watercraft, jon boat, and other marine trailers are compatible with our system, even if they aren't Com-Fabs! Best of all, the attachment is not permanent and allows you to switch your trailer back to its previous setup whenever you desire. If you have questions about setup or compatibility, feel free to contact us.
- Fits on 1.5", 2" or 3" square or rectangular tubing
- Kits and bracing available for 2, 3, 4 or 6 canoe or kayak setups
- Uprights in 24", 30", 40", 48", 60" or 66" available depending on model
- 2x2x11 gauge upright bracing
- Crossbeams in 48" (top mount), 60" (kayak), or 80" (canoe) available
- 2x2x14 gauge crossbeams with steel channels for added stability
*Note: Canoe/Kayak kits have been updated. They now feature dual steel rings on each side of the crossbeam with available plastic protective padding.*
This is a Trailer Conversion Kit only and DOES NOT include a trailer
2 Capacity Canoe/Kayak Conversion Kit
$339.99
Brand Com-Fab
General
2 Capacity Canoe/Kayak Conversion Kit
Universal canoe/kayak trailer conversion kit for up to 2 canoes or 2 kayaks without plastic protective covering.
One size fits all trailer kit:
- Designed to hold 2 kayak/canoes
- Adjustable crossbeam placement to fit a wide range of needs and preferences
- Fits on 1.5", 2", 3" rectangular and/or square tubing where applicable
- 2x2x11 gauge upright bracing for universal fit
- 2x2x14 gauge cross braces
This is a conversion kit only and requires a trailer to mount.
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
Specifications
Kayak Setup - CFKIT-KAY(2)
- 2x 24" Uprights
- 2x 60" Crossbeams with Strap Assist and End Caps
- 2x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 4x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 4x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 4x Turned Eye Bolts for use with Tie Downs
- 8x Galvanized Lock Nuts for locking in Eye Bolts
Canoe Setup - CFKIT-CAN(2)
- 2x 24" Uprights
- 2x 80" Crossbeams with Strap Assist and End Caps
- 2x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 4x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 4x Zinc U Bolts with Washer and Nut for Adjusting and Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 4x Turned Eye Bolts for Securing Tie Downs
- 8x Galvanized Lock Nuts for Securing Eye Bolts
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
3 Capacity Canoe/Kayak Conversion Kit
$409.99
Brand Com-Fab
General
3 Capacity Canoe/Kayak Conversion Kit
Canoe/kayak trailer conversion kit for up to 3 kayaks or 3 canoes without plastic protective covering.
- Designed to hold 3 kayaks/canoes
- Fits on 1.5", 2", 3" rectangular and/or square tubing where applicable.
- 2x2x11 gauge upright bracing for universal fit.
- 2x2x14 gauge cross braces
This is a conversion kit only and requires a separate trailer to mount.
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
Specifications
Kayak Setup - CFKIT-KAY(3)
- 2x 30" Uprights
- 2x 48" Crossbeams with Strap Assist and End Caps
- 2x 60" Crossbeams with Strap Assist and End Caps
- 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
Canoe Setup - CFKIT-CAN(3)
- 2x 30" Uprights
- 2x 48" Crossbeams with Strap Assist and End Caps
- 2x 80" Crossbeams with Strap Assist and End Caps
- 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
4 Capacity Canoe/Kayak Conversion Kit
$529.99
Brand Com-Fab
General
4 Capacity Canoe/Kayak Conversion Kit
Universal canoe/kayak trailer conversion kit for up to 4 kayaks or 4 canoes without plastic protective covering.
One size fits all trailer kit:
- Designed to hold 4 regular sized kayaks or canoes
- Fits on 1.5", 2", 3" rectangular and/or square tubing where applicable.
- 2x2x11 gauge upright bracing for universal fit.
- 2x2x14 gauge cross braces with stability slides, preventing side-to-side movement. (Optional)
This is a conversion kit only and requires a separate trailer to mount.
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
Specifications
4 Capacity Normal Kayak Kit - CFKIT-KAY(4S)
- 2x 30" Uprights
- 4x 60" Crossbeams with Strap Assist and End Caps
- 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
4 Capacity Tall Kayak Kit - CFKIT-KAY(4T)
- 2x 40" Uprights
- 4x 60" Crossbeams with Strap Assist and End Caps
- 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
4 Capacity Normal Canoe Kit - CFKIT-CAN(4S)
- 2x 40" Uprights
- 4x 80" Crossbeams with Strap Assist and End Caps
- 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
4 Capacity Tall Canoe Kit - CFKIT-CAN(4T)
- 2x 48" Uprights
- 4x 80" Crossbeams with Strap Assist and End Caps
- 2x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 8x Turned Eye Bolts for use with Tie Downs
- 16x Galvanized Lock Nuts for locking in Eye Bolts
* The tubing size of the trailer will determine which U Bolts will be needed to secure the uprights to the frame
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
6 Capacity Canoe/Kayak Conversion Kit
$729.99
Brand Com-Fab
General
6 Capacity Canoe/Kayak Conversion Kit
Canoe/kayak trailer conversion kit for up to 6 canoes or 6 kayaks without plastic protective covering.
One size fits all trailer kit:
- Designed to hold 6 regular sized canoes/kayaks
- Fits on 1.5", 2", 3" rectangular and/or square tubing where applicable.
- 2 x 2 x 11 gauge upright bracing for universal fit.
- 2 x 2 x 14 gauge cross braces
This is a conversion kit only and requires a separate trailer to mount.
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
Specifications
6 Capacity Normal Kayak Kit - CFKIT-KAY(6S)
- 2x 48" Uprights
- 6x 60" Crossbeams with Strap Assist and End Caps
- 6x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 12x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 12x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 12x Turned Eye Bolts for use with Tie Downs
- 24x Galvanized Lock Nuts for locking in Eye Bolts
6 Capacity Tall Kayak Kit - CFKIT-KAY(6T)
- 2x 60" Uprights
- 6x 60" Crossbeams with Strap Assist and End Caps
- 6x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 12x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 12x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 12x Turned Eye Bolts for use with Tie Downs
- 24x Galvanized Lock Nuts for locking in Eye Bolts
6 Capacity Normal Canoe Kit - CFKIT-CAN(6S)
- 2x 60" Uprights
- 6x 80" Crossbeams with Strap Assist and End Caps
- 6x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 12x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 12x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 12x Turned Eye Bolts for use with Tie Downs
- 24x Galvanized Lock Nuts for locking in Eye Bolts
6 Capacity Tall Canoe Kit - CFKIT-CAN(6T)
- 2x 72" Uprights
- 6x 80" Crossbeams with Strap Assist and End Caps
- 6x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
- 12x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
- 12x Zinc U Bolts with Washer and Nut for Securing Crossbeams
- 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
- 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
- 12x Turned Eye Bolts for use with Tie Downs
- 24x Galvanized Lock Nuts for locking in Eye Bolts
Click the following link for Assembly Instructions
https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf
48IN 14GA Galvanized Crossbar
$55.00
Brand Com-Fab Trailers
60IN 14GA Galvanized Crossbar
$60.00
Brand Com-Fab Trailers
60IN 14GA Galvanized Crossbar for Canoe/Kayak Kit
80IN 14GA Galvanized Crossbar
$70.00
Brand Com-Fab Trailers
14GA Galvanized Upright
$65.00
Brand Com-Fab Trailers
14GA Galvanized Upright for Canoe/Kayak Kit. Available in 40", 48", 60", and 72".
2IN Kayak/Canoe Trailer Upright Mounting Kit
$12.99
Brand Com-Fab
General
Kayak/Canoe Trailer Upright Mounting Kit
This kit is used to mount uprights on all Kayak/Canoe Trailer Models.
This kit includes:
2 – 7/16" x 2.06" x 4.31" Galvanized U-Bolt
4 – 1/2" SAE Galvanized Flat Washer
4 – 7/16" Galvanized Tri-Lock Nut
MODEL: CFRACKUPRIGHT-MNTKIT
Used on
3IN Kayak/Canoe Trailer Upright Mounting Kit
$12.99
Brand Com-Fab
General
Kayak/Canoe Trailer Upright Mounting Kit
This kit is used to mount uprights on all 3IN tubing Trailer Models.
This kit includes:
2 – 3/8″ x 3.06" x 4.5″ Galvanized U-Bolt
4 – 3/8″ Galvanized USS Flat Washer
4 – 3/8″-16 Galvanized Tri-Lock Hex Nuts
